Life365 KT-RES-HB Respiratory Remote Monitoring Kit User Manual
- June 3, 2024
- Life365
Table of Contents
Life365 KT-RES-HB Respiratory Remote Monitoring Kit
Using the Spirometer
for the Remote Patient Monitoring Program
WELCOME! Now that you have successfully installed the Life365 Health app and enabled the Bluetooth settings on your smart device, you are ready to begin setting up your monitoring devices. We are so glad you have decided to start proactively managing your breathing from home with our monitoring technology
What is Spirometry?
Spirometry measures how much air you inhale, how much you exhale and how quickly you exhale. It can be helpful in monitoring your lung condition such as asthma, chronic obstructive pulmonary disease (COPD) and other conditions that affect breathing.
How Remote Patient Monitoring Works
WHAT THE PATIENT WILL DO:
- Use this device as instructed by your doctor
- Call WPH Cares at 914-681-2273 (M-F, 10am-4pm) for clinical questions
- Call Life365 at 888-818-2322, ext: 2 for technical support (M-F, 8am-8pm)
- In an emergency, call 911 or go to the Emergency Department
WHAT THE CARE TEAM WILL DO:
- Monitor your device readings
- Be available to support you through the monitoring process
- Contact you and/or your doctor if:
- No readings are logged
- Readings are above or below target
Your provider has asked that you use this device every day. However, your plan is individual to you and your health needs. Make sure you write down how often your provider would like you to record your levels. Taking your daily readings only requires a few minutes!
NOTE : For measurement readings to be recorded in your Life365 account, the Life365 Health App must be open when a measurement reading is being taken.
MY PERSONAL SPIROMETER PLAN IS:
- times per day*
- number of days
- is my goal level
What To Do!
- You should take more readings if:
- You are short of breath
- You suspect the reading was not accurate or improperly recorded
- If you use oxygen, please do not remove the nasal cannula to take your readings.
- Stand up and relax before you take your readings. You will be taking 3 long breaths.
- Breathe in as deeply as you can and then place your lips tightly around the mouthpiece so no air can escape.
- Exhale forcefully until your lungs are completely empty. You can remove the device from your mouth when you inhale again.
- Repeat the above process two more times for a total of three long breaths. Wait a few seconds and click the “Save” button.
Now You Are Ready to Start Monitoring
The last step on your way to personalized health monitoring is to pair your medical devices with your smartphone/mobile device at home via Bluetooth.
-
Tap the Hamburger Menu (three lines), located in the upper left of the app screen (A). In the menu list, select My Devices (B).
-
In My Devices, select the Add New button. The app will search for the Bluetooth device (C).
-
Allow a few moments for the app to find the spirometer.
-
Once found in the app, select the new Bluetooth device name (D).
-
Select the Add to My Devices button (E).
-
To complete pairing, take a spirometry reading
Using the Life365 Health App: Taking a reading with your device -
From the main app Dashboard, select the measurement type Spirometry from the list (G).
-
If Spirometry measurement type is NOT displayed on the main app Dashboard, complete the following steps:
-
Select the Hamburger Menu, located in the upper left of the app screen (H). In the menu list, select Settings (I).
-
In Settings, select the Dashboard option (J).
-
A list of all available measurement types will display. Scroll down the list until Spirometry is found. Tap Spirometry to enable (K).
-
Tap the back arrow twice, located in the upper left of the app screen, to return to the main app Dashboard.
-
In Spirometry measurement type, tap Tap to connect (L) or click on the top image. The New FVC Test (M) screen will display.
Note : Make sure that the mouthpiece is inserted into the spirometer. The larger end of the mouthpiece fits at the end of the spirometer. -
On the New FVC Test screen (M), take measurement readings with the Spirometer. Refer to pages 8 and 9 of the Manufacturer User Guide for instructions on how to take a reading. To begin, take a deep breath, and then blow into the mouthpiece for at least 6 seconds. Readings will appear in the chart. You MUST take 3 measurement readings to record and sync. Wait 5-10 seconds after each reading to record. You will stay on the same screen until the measurements are complete. After the third reading, you will automatically be taken to the spirometry data screen, which indicates tests are complete.
-
On the Spirometry Data screen (N) you can review the current measurement reading and enter optional Medication Info or
Note(s). Select Save when finished (O). -
After saving the measurement reading, you will return to the Spirometry screen. Allow a moment for the measurement reading to sync and record in the app. Navigate back to the main Dashboard to review all measurement readings
You have successfully paired and taken a measurement reading
Visit :
https://www.life365.health/en/support/app
for instructions and other helpful resources.
Always follow manufacturer instructions for use, included with your Bluetooth
device.
©2021 Life365 Inc. / MKT-DOC-004 / RevB-FEB2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>