Life365 Health App with the iChoice Pulse Oximeter User Guide

: June 5, 2024
: Life365

Table of Contents

Using the Life365 Health App
- For Apple iOS
- For Android
Pairing the Life365 Health App to your device
Using the Life365 Health App: Taking a reading with your device
Documents / Resources

Life365 Health App with the iChoice Pulse Oximeter

Using the Life365 Health App

Once the Life365 Health app is installed, make sure the Bluetooth settings on your smart device are enabled by completing the following steps:

For Apple iOS

Access iOS Settings.
Search for the app Life365 and select when found.
For Bluetooth, enable the toggle button.

For Android

Access Android Settings.
Select Apps & Notifications.
Search for the app Life365 and select when found.
Select the option Permissions.
Allow any / all App permissions available.

When complete – your device is ready to pair.

Pairing the Life365 Health App to your device

After account setup, the app will open to your main Dashboard. Refer to the Life365 Health App User Manual for account set-up instructions.

Tap the Hamburger Menu, located in the upper left of the app screen (A).
In the menu list, select My Devices (B).
In My Devices, select the button Add New. The app will search for the Bluetooth device (C).

Make sure the Bluetooth device is located near the smart device.
To pair, take a measurement reading.
Turn ON the pulse oximeter by pressing the power button.
Insert a finger into the pulse oximeter.
Allow a few moments for the app to find the pulse oximeter.
Once found in the app, select the Bluetooth device name on the app screen (D).
Select the button Add to My Devices (E).

5.1 The app will return to the My Devices screen.
The new Bluetooth device will now be listed (F).
Allow a few moments for the measurement reading to sync and record in the app.
The pulse oximeter screen will blink the measurement reading when the reading has been successfully captured.
Navigate to the main app Dashboard to review all measurement readings.

Using the Life365 Health App: Taking a reading with your device

7. Take a measurement reading with the pulse oximeter. Turn ON the pulse oximeter by pressing the power button.
Insert a finger into the pulse oximeter.

8. Allow a few moments for the measurement reading to sync and record in the app.
The pulse oximeter screen will blink the measurement reading when the reading has been successfully captured.
Navigate to the main app Dashboard to review all measurement readings.