Spring SM-300LP LoPRO Slim-line Hold-Only Induction Warmer Owner’s Manual
- June 3, 2024
- SPRING
Table of Contents
Spring SM-300LP LoPRO Slim-line Hold-Only Induction Warmer Owner’s Manual
Before You Begin
To ensure safe operation, read the following instructions in their entirety.
Warning
Warning is used to indicate the presence of a hazard that can cause severe
personal injury, death, or substantial property damage if the warning is
ignored.
Caution
Caution is used to indicate the presence of a hazard that will or can cause
minor personal injury or property damage if the caution is ignored.
NOTICE
Notice is used to note information that is important but not hazard-related.
To reduce risk of injury or damage to the equipment:
- Plug only into grounded electrical outlets matching the nameplate rated voltage.
- Do not power the equipment with extension cords, power strips, or multipurpose sockets.
- Equipment should only be used in a flat, level position.
- Do not obstruct or cover the equipment in any way when in use.
- Do not operate unattended.
- Do not leave an empty vessel on the equipment when in use.
- Closely supervise equipment operating in public areas and/or around children.
- Do not operate if equipment has been damaged or is malfunctioning in any way.
- Keep equipment and power cord away from open flames, electric burners or excessive heat.
- Unplug equipment and let it cool before cleaning.
- Unplug when not in use.
Function
Spring USA’s 300-watt, Lo PRO™ Induction Range, item #SM300-LP, is a portable, product holding range intended for countertop use. The range features a durable, all-black housing with touch controls on the glass surface. The range has been designed specifically to keep food warm. Food must be at or above serving temperature before being placed on the range.
NOTICE: The induction range only maintains temperature – it does not cook or continue to cook food.
Electrical Requirements
| Item # | Voltage | Phase | Hertz | Watts | Amps | Plug |
|---|---|---|---|---|---|---|
| SM-300LP | 110-120 | 1 | 60 | 300 | 2.5 | NEMA 5-15P |
Installation
Inspect all parts of the induction range prior to installation and use. If the unit is damaged, do not use. Contact a supplier for a replacement.
To prepare the induction range for use, simply place the unit on a flat, level surface. Ensure the installation location has dedicated power. There must be at least 1.2” (3 cm) of space available around the induction range for proper ventilation.
Operation
To operate the induction range, induction-ready vessels must be used.
- Glass serving vessels are not suited for use on the induction range.
- Vessels must have a flat base in order to make full contact with the range. Vessels that are footed, or that have a raised ridge, are not suited for the induction range.
- Vessels must have a base diameter greater than 4.7”.
NOTICE:
Spring USA induction servers and induction ranges are designed to work
together as a system. Optimal performance is achieved by using Spring USA
components in conjunction with each other. Spring USA cannot guarantee the
performance of facsimile products offered by other companies.
Follow the below steps for operating the induction range:
-
Plug in the unit. Press the ON/OFF button.
-
Place the vessel on the induction range surface.
NOTICE:
As a safety feature, if no induction ready vessel is placed on the surface after 2.5 minutes, the unit will shut off. -
The LED lights above each setting will blink until a setting is pressed
-
Press the desired setting button. See the below chart for approximate temperature ranges.
Low| Low-Med| Med-High| High
---|---|---|---
145-155°F| 156-165°F| 166-175°F| 176-185°F
62-68°C| 69-73°C| 74-79°C| 80-85°C -
The LED lights will stop blinking and only the LED light above the selected setting button will remain on.
-
To ensure the setting does not change unintentionally, press the lock button on the side of the range to lock the controls. The ring around the lock button will illuminate blue. The settings and ON/OFF button will not function when the lock in engaged.
-
To enable the settings and ON/OFF button, simply press the lock button again and the blue ring around the button should no longer be illuminated.
-
The induction range will continue to warm until the set temperature is reached. Once the temperature is reached, the range will maintain that temperature.
-
To change settings, simply press the desired setting button.
-
To turn off the unit, press the ON/OFF button. No LED lights should be illuminated.
Caution
Do not touch the top surface of the induction range immediately after heating
and removing a vessel. The top surface may be hot due to heat transferred from
the vessel.
Maintenance
To clean the induction range, first ensure the unit has been turned off,
unplugged from the power source and has cooled before handling.
Wipe down the unit with a sponge or cloth with a mild dishwashing liquid. Dry
with a clean, soft cloth. Do not immerse the induction range directly in water
for cleaning – this will damage the unit.
Troubleshooting/Error Codes
| Error | Cause | Solution |
|---|---|---|
| 4 Flashing Lights on Control Panel | The induction range does not sense an | |
| induction ready vessel on the surface | Place an induction ready vessel on the |
range.
Low & Low-Med Lights Flashing| The range has overheated due to blocked
ventilation and has shut down.| Clear vents, let the range cool and restart
the range.
Low & Med High Lights Flashing| Overheating protection has been activated and
the range has shut down.| Remove vessel from the range, let the range cool and
restart the range.
Low & High Lights Flashing| The range is experiencing temporary voltage
overload.| Remove vessel from the range, let the range cool and restart the
range. Review dedicated power requirements.
Keep the induction range away from other ovens or stoves. If the surrounding temperature is hot, the induction range may stop heating.
Service & Repair
Never attempt to service any part of The LoPRO™ Induction Range. Attempting to service the unit on your own, or through an unauthorized repair facility, automatically voids your warranty. Contact our Service Department at 630-527-8600. For service forms, visit the Spring USA website.
Warranty
Spring USA Induction Ranges offer a one-year, overnight exchange warranty (continental US only), from the date of invoice, against manufacturers defects. See SpringUSA.com for more details.
Support
127 Ambassador Drive, Suite 147
Naperville, IL 60540-4079
P: 630-527-8600
F: 630-527-8677
[email protected]
www.springusa.com
