Lucent IW40-SQ InWall40 Square Recessed Wall Light Instructions
- June 3, 2024
- Lucent
Table of Contents
Lucent IW40-SQ InWall40 Square Recessed Wall Light
Instructions
InWall provides fully recessed wall light for interior and exterior installation. InWall products are Wet rated and include round and square variants. Springs for hollow wall and tube for solid surfaces installation available. Available in 3 color temperatures. TRIAC/Phase, 0-10V/1-10V, DMX and DALI/digital dimming.
- LED Source: LED
- CCT: 3000K
- Drive Current: 700mA
- Power inc Driver: 2.6W
- Delivered Lumens: 30
- Delivered Intensisty cd: 59
- Efficacy lm/w: 12
- Forward Volt :3V
- CRI: ≥90 CRI
- Ingress Protection :IP66/67
Project Ref:
Location Ref:
(Specify fixture part number (All boxes must be flled in to correctly order
)
For exterior use an IP68/Wet connector is required.
Not all power supplies are available for single connection, some require
series connection with multiple fittings. Consult Lucent Lighting Inc for more
information.
All Lucent InWall products are supplied as standard with 5ft (1.5m) lead
Installation Methods
IW40-90-SPRING
For installation in hollow walls Cut out: 1.38” (35mm) Ø
IW40-TUBE
Indoor Tube:
For installation in solid surfaces Cut out: 1.42” (36mm) Ø
IW40-CONDUIT
Installs behind wall, Conduit must be provided as per NEC/CEC requirements
Accessories
Technical Details
- Custom color requires a paint chip or RAL code and may increase price and lead-time
- It is the responsibility of the specifier/integrator/installer to check and ensure compatibility of any control equipment used. Additional cabling may be required depending on the dimming protocol specified.
- Bluetooth (wireless) is a communication protocol. The exact dimming protocol must be confirmed to allow the selection of suitable drivers or Bluetooth devices.
- Non specific driver type, dimming performance depending on exact driver used. Contact Lucent Lighting for more information.
- Depth indicated is the minimum recess depth for the luminaire with a remote mounted LED driver. Installing a driver through either the lumi-naire cut-out or installation kit may require additional recess depth, please refer to the relevant installation instructions prior to purchase.
- First Fix Requirement. Luminaire comprised of fixture body with ceiling trim and installation kit, which is to be fitted into the ceiling once fin-ished. Ensure correct alignment of the installation kit before final assembly (see luminaire installation instructions for details) Location. Tested from underside of the ceiling.
- Data correct at time of publishing. It is the policy of Lucent Lighting to continually review and improve its products and therefore reserve the right to change any details of product or withdraw specifications without prior notice.
- This specification sheet supersedes all previous versions.
- All intellectual property rights pertaining to the product described above and to this document are owned by or licensed to Lucent Lighting, In-corporated. Lucent Lighting reserves the right to take whatever action is necessary to protect its intellectual property, patents and trademarks
- Please notify Lucent Lighting Inc. inaccuracies. E&OE
Beam Details
Color temperature| Color rendering index| Red
component| Color fidelity| Color gamut| Color quality
scale| Color coordinate cie 1931| Color coordinate cie 1931|
Color coordinate| Color coordinate| Color diviation from black
body
---|---|---|---|---|---|---|---|---|---|---
C CT| CRI| CRI R9| TM30 Rf| TM30 Rg| CQS| x| y| u| v| Δuv
3000 K| 91.6| 56.7| 90.5| 99.4| 90.3| 0.437| 0.404| 0.248| 0.348| 0.0010
Beam intensities from 1-20m
1m| 2m| 3m| 4m| 5m| 6m| 7m| 8m| 9m| 10m| 11m| 12m| 13m| 14m| 15m| 16m| 17m|
18m| 19m| 20m
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
3.3ft| 6.6ft| 9.8ft| 13.1ft| 16.4ft| 19.7ft| 23ft| 26.2ft| 29.5ft| 32.8ft|
36.1ft| 39.4ft| 42.7ft| 45.9ft| 49.2ft| 52.5ft| 55.8ft| 59.1ft| 62.3ft| 65.6ft
2lx| 1lx| 0lx| 0lx| 0lx| 0lx| 0lx| 0lx| 0lx| 0lx| 0lx| 0lx| 0lx| 0lx| 0lx|
0lx| 0lx| 0lx| 0lx| 0lx
0.2fcd| 0.1fcd| 0fcd| 0fcd| 0fcd| 0fcd| 0fcd| 0fcd| 0fcd| 0fcd| 0fcd| 0fcd|
0fcd| 0fcd| 0fcd| 0fcd| 0fcd| 0fcd| 0fcd| 0fcd
The above information is for 3000K colour temperature, for specific module
information please see LED spec located on our website
For information regarding other colour temperatures please use the following
factors for lumen output and candelas:
- 2700K = 0.82
- 4000K = 1.11
www.lucent-lighting.com
Copyright © 2021 Lucent Lighting Inc.
+1 518 239 8300
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>