TIKLANDS S25 Wireless Earbuds User Guide
- June 14, 2024
- TIKLANDS
Table of Contents
TIKLANDS S25 Wireless Earbuds
Product Information
- Product Name : Bluetooth Device
- Available Devices: S25, NoKva307, X2, 2S, X1, 5S
- Warranty : 2-year warranty
- Support : Free replacement of damaged products (No need to return damaged products)
- Contact Information
- Email: katong96120@gmail.com
- WhatsApp: +86 13242960237
- Facebook: facebook.com/Tiklands
Product Usage Instructions
Warranty Activation
Please activate the 2-year warranty within 14 days of receiving the
product. Follow the steps below
- Scan the code to enter our website xtikland.com
- Activate the warranty within 14 days after receiving the product.
Pairing and Connection
- Take out the earbuds (Earbuds will auto power on)
- Open the phone’s Bluetooth settings
- Click the pairing button to connect with the available devices list
Resetting Earbuds
If the earbuds have any connection or function problems, please follow the
steps below to reset them
- Delete the Bluetooth pairing information on the phone
- Put the earbuds into the charging case to charge
- Take out the earbuds and wait for 20 seconds
- If the above operation does not work, please try again
Playback and Call Controls
- Play/Pause : X2 (Click Once)
- Switch Song : X2 (Click 2 times)
- Adjust Volume: X2 (Press and hold for 2 seconds)
- Power On/Off : X2 (Press and hold for 2 seconds)
- Siri/Voice Assistant : X3 (Press and hold for 2 seconds)
- Answer/Hang up/Reject Call: X1 (Click Once)
Troubleshooting
- No sound when connected: Click the right earbud to increase the volume
- One of the earbuds cannot be charged: Clean the charging contacts of the earbuds and the charging case
- One of the earbuds cannot be connected : Reset the earbuds
- If the earbuds cannot be charged, please activate the warranty and contact us to send a new product
- Please clean the charging contacts of the earbuds and charging case frequently to avoid charging failures
Safety Instructions
- Keep the product away from extremely hot and cold environments, as it may damage the battery and circuit
- Avoid liquid immersion into the product
- Do not disassemble the product
- Do not use concentrated chemical products or detergents to clean the product
- Use only a 5V/1A power supply. Connecting a power supply with a higher voltage may cause serious damage
- Do not randomly discard or place the product near fire or high temperature to avoid the danger of explosion
Contact Information
- Email : contact@evatmaster.com
- Email : contact@evatmaster.com
Active 2-Year Warranty
Scan the code to enter our website (xtikland.com) to activate the warranty within 14 days after receiving the product.
Support free replacement of damaged products. (No need to return damaged products)
- Email : katong96120@gmail.com
- WhatsApp : +86 13242960237
- Facebook : facebook.com/Tiklands
Connect
- Take out the earbuds (Earbuds auto power on)
- After open the phone Bluetooth, Click the
to Pairing
Reset
If earbuds has any connection or function problems, please reset the earbuds
- Delete the BT pairing information on the phone.
- Put the earbuds into the charging case to charge.
- Take out the earbuds and wait for 20 seconds.
(If the above operation does not work, please try again)
Operation
- X1 : Click Once
- X2 : Click 2 times ©
- 2S : Press and hold for 2 seconds
Problem handling
- Can be connected but there is no sound : Click the right earbuds to increase the volume.
- One of earbuds cannot be charge : Clean the charging contact of the earbuds and the charging case.
- One of the earbuds cannot be connected: Reset the earbuds.
If the earbuds cannot be charged, please activate the warranty and contact us
to send a new product.
Please clean the charging contacts of the earbuds and charging case frequently
to avoid charging failures.
Safety Instructions
- Keep the product away from extremely hot and cold environments, it will damage the battery and circuit.
- Avoid liquid immersion into the product.
- Do not disassemble the product.
- Do not use concentrated chemical products or detergents to clean the product.
- Use only 5V/1A power supply. Connecting the power supply voltage too high may cause serious damage.
- Do not randomly discard or place the product near fire or high temperature to avoid the danger of explosion.
eVatmaster Consulting GmbH Bettinastr. 30,60325 Frankfurt am Main,Germany Contact@evatmaster.com
EVATOST CONSULTING LTD Suite 11, First Floor, Moy Road, Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR Contact@evatmaster.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>