ITALUX PND-3965-2-BRO Lupus Hanging Lamp Light Installation Guide
- June 15, 2024
- ITALUX
Table of Contents
Installing Instructions
PND-3965-2-BRO Lupus Hanging Lamp Light
Model: PND-3965-2-BRO , PND-3965-2-BK
ATTENTION:
- To avoid getting hurt or scratched during installation, please use gloves.
- Do not install any lamp on a wet or damp ceiling.
- Do not leave the lamp near acidic and alkaline chemicals or gases or other corrosive substances. Do not wash the lamp with water. Clean the lamp with a clean, dry soft cloth. Otherwise, the lamp will rust.
- To avoid damage, be especially careful when installing lampshades.
- Use the help of an electrician to install the lamp correctly.
- During installation, the power cables must be properly fitted. Before turning on the power, make sure that all screws are tightened sufficiently.
- Before installing, cleaning lamps or replacing bulbs, please turn off the power first.
- Do not pull wires and plugs too tightly. Disassembly is not allowed.
- To avoid danger, a damaged electric cable should be replaced by appropriately qualified personel.
PDF pdfFactory Pro
www.fineprint.cn
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>