Spring Sunshine Technology LM459 Wireless Charger Table Light Instructions
- June 6, 2024
- Spring Sunshine Technology
Table of Contents
Phone Wireless Charger Table Light
Technical Information
Model: LM459
Finish: White
Input power: 9V 2A(Adapter included)
Light Power: 4.5W
Power source: 402835 LED Module
Color temperature:3000K / 4000K / 6500K
Luminous Flux: 400lm CRI>90
Wireless charging power: Max 10W
USB output: 5V 1A(Max 5W)
Materials: ABS+Aluminum
Packing list: table light1+User manual1+
USB cable1+9V 2A adapter*1
Instructions for use
-
Micro USB ports for connecting the table light: when use For this table light please use matching adapter DC 5V/2A or 9V/2A.
-
USB ports for phone wire charging, USB output DC 5V/1A, max power 5W.
-
Dimmable control: tap and hold on the switch button, then it can be dimmable, getting brighter or getting darker.
-
CCT control: Tap the switch button, then it can be CCT control, 3000K/4000K/6500K/Off.
-
Wireless charging indicator light status:
The light will flash three times when power on, and it will not be on when standby.
When charging, the indicator light will be red.
When the mobile phone is fully charged, the indicator light will be green.
When there are metal foreign maters or over temperature, the red light will flash.
When the power supply is insufficient, the green light will flash. -
Try to keep the mobile phone in the middle of the charging area, and it’s compatible with all wireless charging mobile phones which have QI protocols.
Notice: For smooth wireless/USB charging, please ensure the power input
reaches 9V/2A(using our own adapter).
The supply from PC, power bank, or another adapter might be below the level,
leading to slow charging or not charging.
5V/2A—Enable table lighting and wireless charging(slow).
9V/2A—Enable table lighting, wireless charging, and USB charging at the same
time.
After-Service
A 24-month warranty is provided for this device from the date of purchase. For
any questions/assistance/support, please call the customer service or contact
us by E-mail.
SPRING SUNSHINE TECHNOLOGY CO., LIMITED
Adr: Room 2401-2404, 24/F., Fu Fai Commercial Centre, 27 Hillier Street,
Sheung Wan,HongKong
Phone: 1-855-955-7007(24×7)
Website: www.consciot.com
E-mail: support@consciot.com
Made in China
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum 20cm distance between the
radiator and your body: Use only the supplied antenna.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>