Goldair GAS55 97cm Tower Fan Instruction Manual
- June 3, 2024
- GOLDAIR
Table of Contents
Goldair GAS55 97cm Tower Fan
General Care and Safety Guide
Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Ensure that the fan is switched off from the supply mains before removing the guard.
- Use only the voltage specified on the rating plate of the appliance.
- Keep all objects at least 1 Metre from the front, sides and rear of the appliance
- This appliance is intended for household use only and not for commercial or industrial use.
- Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
- Always unplug appliance when not in use.
- When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Goldair Customer Services Team.
- If your appliance does not work, or is not working properly, contact the place of purchase. Repair work on the appliance by unqualified persons can cause serious risk to the user.
- Ensure hands are dry before handling the plug or the main unit.
- Carry out regular checks of the supply cord to ensure no damage is evident.
- Ensure that the cord is fully extended (not coiled) while in use.
- Avoid contact with the moving parts. Keep hands, hair, clothing, away from blade of the fan during operation to reduce the risk of injury to person and/or damage to the unit.
- Switch off and use handles provided when moving.
- It is recommended that this fan is plugged directly into the wall socket.
- A correctly specified, undamaged extension cord may be used with this fan provided it is used in a safe manner.
- Never place appliance close to radiant heat source.
- Never operate in areas where petrol, paint or other flammable liquids are used or stored.
- Never use the appliance to dry clothes.
- Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
- Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
- Never connect the appliance to mains supply until completely assembled and adjusted.
- Never remove plug from power socket until the appliance has been switched off.
- Never remove plug from power socket by pulling cord – always grip plug.
- Never twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
- Never use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool or other liquids. The appliance must not be immersed in any liquids.
- Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses, by clients in hotels, motels, bed and breakfast type environments and other residential type environments
- Never use this appliance outdoors.
- Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Have the appliance checked and repaired by a qualified electrician if repair is necessary.
- Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
The remote control supplied with this fan uses a CR2032 coin type battery.
DANGER IF SWALLOWED
Keep batteries out of reach of children. Swallowing may lead to serious injury
or death in as little as 2 hours due to internal burns. If swallowed, go
straight to a hospital emergency room.
Dispose of used batteries immediately.
| DANGER IF SWALLOWED
Keep batteries out of reach of children. Swallowing may lead to serious injury
or death in as little as 2 hours due to internal burns. If swallowed, go
straight to a hospital emergency room.
Dispose of used batteries immediately.
---|---
Parts of Your Fan
The fan comes fully assembled
Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. This appliance requires no installation, it should be used solely
as a portable appliance.
WARNING: Keep all objects at least 1 metre from the front, sides and rear
of the appliance. IMPORTANT! NEVER COVER THIS APPLIANCE!
Place the fan on a dry, level and sturdy surface.
Ensure the fan speed control is on the OFF position before plugging the power
cord into the socket.
Fan control
The fan can be operated by the manual controls located on the fan or by the
remote control.
POWER
Turn the fan ON by pressing the ON/OFF button. Turn the fan OFF by
pressing the ON/OFF button again.
SPEED
You can adjust the fan speed to the desired level HIGH, MEDIUM or LOW by
pressing the SPEED button.
The speed setting is indicator lights will be illuminated.
MODE (only on the remote control)
Pressing the MODE button will set the FAN to NORMAL, NATURAL, or SLEEP
mode.
- NORMAL Mode: the fan will work at any speed you set up.
- NATURAL Mode: the fan will start work at high speed(15s), middle speed(15s) and low speed(15s), it works as per this recycle.
- SLEEP Mode: if you set the mode at high speed, fan will work at high speed at 30 mins, then transfer to middle speed at 30 mins and transfer to low speed until fan stop working.
When in Natural or Sleep mode, the corresponding indicator will be illuminated on the control panel.
TIMER
The fan is equipped with a timer that allows you to set it’s length of
operation from 1 hour to 15 hours in 1 hour increments. Press the TIMER button
to increase the length of time.
OSCILLATION
Pressing the ‘SWING’ button will start and stop the oscillation function
After 60 seconds of no input from the control panel or remote control, the fan display will turn off.
Remote control
The remote requires a line-of-sight path to allow for the signal to be
received by the unit. Position the unit so the receiver lens is visible from
the remote control.
The symbols on the remote correspond to the symbols on the main unit.
The remote control supplied with this fan uses a CR2025 coin type
battery.
DANGER IF SWALLOWED
Keep batteries out of reach of children. Swallowing may lead to serious
injury or death in as little as 2 hours due to internal burns.
If swallowed, go straight to a hospital emergency room. Dispose of used
batteries immediately.
Cleaning
The fan requires regular cleaning to ensure trouble free operation.
Unplug the fan from the mains supply before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and
dirt.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Ensure the fan is dry before plugging back into the mains supply.
Do not attempt to dismantle the fan. There are no user serviceable parts.
For service or repair, contact an authorised electrical service technician.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of
booklet)
Two Year Warranty
Thank you for purchasing this Goldair Platinum product. Your product is
warranted against faults and manufacture when used in normal domestic use for
a period of two years. In non-domestic use Goldair limits the voluntary
warranty to three months.
Goldair undertake to repair or replace this product at no charge if found to
be defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident,
incorrect installation, or work carried out by anyone other than a qualified
electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and
remedies available to you under law in relation to the goods or services to
which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand this warranty is additional to the conditions and guarantees of
the Consumers Guarantee Act (1993).
Goldair – New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz
Goldair – Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au
New Zealand
PO Box 100707,
North Shore Mail Centre,
Auckland, 0745
www.goldair.co.nz
Australia
PO Box 574,
South Morang,
Victoria, 3752
www.goldair.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>