Goldair GCHV200 45cm High Velocity Pedestal Fan Instruction Manual
- October 27, 2023
- GOLDAIR
Table of Contents
Operating Instructions
45cm High Velocity Pedestal Fan
Model: GCHV200
General Care and Safety Guide
Thank you for choosing this Golder product. This Golder appliance has been
designed and manufactured to high standards of engineering and with proper use
and care, as
described in this leaflet, will give you years of useful service. Please read
these instructions carefully and keep them for future reference.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they do not play with the appliance.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
-
Ensure that the fan is switched off from the supply mains before removing the guard.
-
Use only the voltage specified on the rating plate of the appliance.
-
Keep all objects at least 1 Metro from the front, sides and rear of the appliance
-
This appliance is intended for household use only and not for commercial or industrial use.
-
Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
-
The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
-
Always unplug appliance when not in use.
-
When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Goldair Customer Services Team.
-
If your appliance does not work, or is not working properly, contact the place of purchase. Repair work on the appliance by unqualified persons can cause serious
risk to the user. -
Ensure hands are dry before handling the plug or the main unit.
-
Carry out regular checks of the supply cord to ensure no damage is evident.
-
Ensure that the cord is fully extended (not coiled) while in use.
-
Avoid contact with the moving parts. Keep hands, hair, clothing, away from blade of the fan during operation to reduce the risk of injury to person and/or damage to the unit.
-
Switch off and use handles provided when moving.
-
It is recommended that this fan is plugged directly into the wall socket.
-
A correctly specified, undamaged extension cord may be used with this fan provided it is used in a safe manner.
-
Never place appliance close to radiant heat source.
-
Never operate in areas where petrol, paint or other flammable liquids are used or stored.
-
Never use the appliance to dry clothes.
-
Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
-
Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot soapy water only. Always remove plug from the mains
supply before cleaning. -
Never connect the appliance to mains supply until completely assembled and adjusted.
-
Never remove plug from power socket until the appliance has been switched off.
-
Never remove plug from power socket by pulling cord – always grip plug.
-
Never twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from
any cord storage area and is unrolled before use. -
Never use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool or other liquids. The appliance must not be immersed in any liquids.
-
Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses, by clients in hotels, motels, bed and breakfast type environments and other residential type environments
-
Never use this appliance outdoors.
-
Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Have the appliance checked and repaired by a qualified electrician if repair is necessary.
-
Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
Components
Assembly
Unscrew the base locking screw and ring from the stand pole and insert the
stand pole through the hole in the centre of the base. Tighten the base and
stand pole by twisting
into position. Turn the base upside down with the pole facing the floor then
place the base weight support at the bottom of the stand base.
Tighten the base weight support to the stand base with the ring and base
locking screw. Unscrew the locking nut from the fan head. Put the fan head
into the pole, and using the clamp screw, tighten the fan head and the pole.
Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. This appliance requires no installation, it should be used solely as a portable appliance.
WARNING: Keep all objects at least 1 metro from the front, sides and rear of the appliance.
Place the fan on a dry, level and sturdy surface.
Plug the power cord into the socket, making sure the speed control is at OFF
position.
Fan Control Switch
The control switch positions are:
0 = OFF
1 = Low Speed
2 = Medium Speed
3 = High Speed
To operate the fan push down speed control desired.
Adjust tilt by turning fan head (i.e. either upward or downward).
IMPORTANT! NEVER COVER THIS APPLIANCE!
Cleaning
The fan requires regular cleaning to ensure trouble free operation.
Ensure that the fan is switched off from the supply mains before removing the
guard.
Unplug the fan from the mains supply before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and
dirt.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Ensure the fan is dry before plugging back into the mains supply.
Do not attempt to dismantle the fan. There are no user serviceable parts. For
service or repair, contact an authorized electrical service technician.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of
booklet).
SUPPORT AND TECHNICAL ADVICE
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz| Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
One Year Warranty
Thank you for purchasing this Golder product. Your product is warranted
against faults and manufacture when used in normal domestic use for a period
of one year. In non-domestic use Golder limits the voluntary warranty to three
months.
Golder undertake to repair or replace this product at no charge if found to be
defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident,
incorrect installation, or work carried out by anyone other than a qualified
electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits to you given by this warranty are in addition to other rights and
remedies available to you under a law in relation to the goods or services to
which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand this warranty is additional to the conditions and guarantees of
the Consumers Guarantee Act (1993).
Goldair – New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland , 0745
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz| Goldair – Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au
---|---
Golder One Year Warranty (IMPORTANT: Please complete and retain this warranty
card)
Name……..
Address…….
Place Of Purchase…….
Date of Purchase……..
Name Of Product……..
Model Number……
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.
Model No: GCHV200
Supply: 220-240VAC 50Hz
Wattage: 140W CLASS I
Approval No: U21741EA
MADE IN CHINA
QC Passed: PO#-WWYY
CUSTOMER SUPPORT
NEW ZEALAND PH: 0800 232 633
AUSTRALIA PH: 1300 465 324
CDB
New Zealand
PO Box 100707,
North Shore Mail Centre,
Auckland, 0745
www.goldair.co.nz
Australia
PO Box 574,
South Morang,
Victoria, 3752
www.goldair.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>