Goldair GPPH700 Series Panel Heater Castor Wheels Instruction Manual
- October 30, 2023
- GOLDAIR
Table of Contents
Assembly Instructions
Before using this appliance, it must either be wall mounted or have the castor
plates and castors fitted.
This appliance has been supplied with ‘1 way screws’ for permanent
installation of the feet. This is a safety requirement for the New Zealand and
Australian market.
FREE STANDING
- Ensure the appliance is unplugged and power switches are off.
- Carefully turn the main body upside-down on a scratch-free and stable surface. Be careful to prevent damage to the cosmetic finish or your floor surfacing.
- Align the screw hole on the Castor Wheel Bracket with the screw hole on the base of the appliance.
- Attach Castor Wheel Bracket with the ‘1 way screws’ provided and ensure the bracket sits firmly in place (do not over tighten). Firmly press Castor Wheels into the slots provided on the Castor Wheel Bracket until they click into place. Some force may be required.
- Set appliance upright.
NOTE: The wall bracket edges may be sharp. It is recommended that if using as a free standing appliance please remove the wall bracket from the back of the heater.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>