Goldair GSPF400R 40cm Pedestal Fan with Remote Instruction Manual

October 27, 2023
GOLDAIR

Goldair GSPF400R 40cm Pedestal Fan with Remote Instruction Manual
Goldair GSPF400R 40cm Pedestal Fan with Remote

General Care and Safety Guide

Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference.

  1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  2. Children should be supervised to ensure that they do not play with the appliance.
  3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  4. Ensure that the fan is switched off from the supply mains before removing the guard.
  5. Use only the voltage specified on the rating plate of the appliance.
  6. Keep all objects at least 1 Metre from the front, sides and rear of the appliance
  7. This appliance is intended for household use only and not for commercial or industrial use.
  8. Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
  9. The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
  10. Always unplug appliance when not in use.
  11. When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Goldair Customer Services Team.
  12. If your appliance does not work, or is not working properly, contact the place of purchase. Repair work on the appliance by unqualified persons can cause serious risk to the user.
  13. Ensure hands are dry before handling the plug or the main unit.
  14. Carry out regular checks of the supply cord to ensure no damage is evident.
  15. Ensure that the cord is fully extended (not coiled) while in use.
  16. Avoid contact with the moving parts. Keep hands, hair, clothing, away from blade of the fan during operation to reduce the risk of injury to person and/or damage to the unit.
  17. Switch off and use handles provided when moving.
  18. It is recommended that this fan is plugged directly into the wall socket.
  19. A correctly specified, undamaged extension cord may be used with this fan provided it is used in a safe manner.
  20. Never place appliance close to radiant heat source.
  21. Never operate in areas where petrol, paint or other flammable liquids are used or stored.
  22. Never use the appliance to dry clothes.
  23. Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
  24. Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
  25. Never connect the appliance to mains supply until completely assembled and adjusted.
  26. Never remove plug from power socket until the appliance has been switched off.
  27. Never remove plug from power socket by pulling cord – always grip plug.
  28. Never twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
  29. Never use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool or other liquids. The appliance must not be immersed in any liquids.
  30. Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses, by clients in hotels, motels, bed and breakfast type environments and other residential type environments
  31. Never use this appliance outdoors.
  32. Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Have the appliance checked and repaired by a qualified electrician if repair is necessary.
  33. Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
    Product Card

Components

Main Unit
Main Unit

  1. Centre Grill Cap
  2. Front Grill
  3. Fan Blade
  4. Plastic Mounting Nut
  5. Rear Grill
  6. Motor Shaft
  7. Motor Housing
  8. Oscillating Knob
  9. Control Panel
  10. Body
  11. Set Screw
  12. Inner Tube
  13. Height Adjustment Collar
  14. Outer Tube
  15. Base End Caps
  16. Screw Cover

Control Panel and Remote Control
Control Panel

  • A. Remote Control Sensor
  • B. Power On Indicator
  • C. Speed indicators(high-mid-low)
  • D. OFF button
  • E. TIMER button
  • F. ON/SPEED button
  • G. MODE button
  • H. Time indicators 0.5-1-2-4 hrs
  • I. Normal Mode Indicator
  • J. Sleep Mode Indicator
  • K. This button is inactive

Assembly

First, loosen and remove the four screws from the cross bars. Then interlock cross bars A and B. Be sure to align the four holes in the bars with those on the flange of the outer tube. Secure the flange to the bars with the four screws.
Assembly

Loosen and remove the height adjustment collar from the top of the inner tube. Slide the base decorative cap down over the assembly. Replace the height adjustment collar on top of the inner tube. Pull the inner tube out from the outer tube to  adjust the tube to the desired height and tighten the collar.
If necessary, slightly loosen the set screw by turning it anticlockwise. Slide the switch box down over the inner tube and tighten the set screw. Make sure the set screw is tightly secured.

Blade and grill
Unscrew the guard mounting nut from the front of the motor housing by rotating it anticlockwise.
Position the rear grill against the front of the motor housing with the handle at the top, ensure that the locating pegs on the motor housing are engaged correctly in the holes of the rear grill.

Push the fan blade onto the motor shaft, locating the slot at the back of the blade on the drive pin that passes through the motor shaft.

Position the front grill against the rear grill so that the holes in the rims that accept the small nut and bolt are in line. Insert the bolt through the holes and screw on the nut. Do not fully tighten at the stage. Push the grill retaining clips into position ensuring that they engage correctly on the rim of the grill.

Operating your Fan

Always choose a safe location for the fan, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. This appliance requires no installation, it should be used solely as a portable appliance.

WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance.

IMPORTANT! NEVER COVER THIS APPLIANCE!

Place the fan on a dry, level and sturdy surface.
Check that the fan control is set to the off position before plugging into the mains supply.

Fan control
Switch on the appliance by pressing the on/speed button on the control panel. The fan starts to blow at low speed.
The low speed indicator will illuminate. To change speed, press button. Fan speed will change with each button press. The corresponding indicator light will illuminate.

Switch fan off by pressing off button.

To tilt, loosen the neck screw – adjust to position – then tighten the neck screw to hold.

Oscillation
To activate the oscillation function, press the swing button. The swing indicator will illuminate and the fan will begin to oscillate. To stop oscillation, press button a second time.

Timer
If you wish to turn the fan off at a pre-determined time press the timer button. The fan can be set to turn off from 0.5 hours to 7.5 hours.
To set the timer, turn the fan on at the desired speed, press the timer button until the desired run time is illuminated. The fan will turn off once the time has expired. If no time is selected, the appliance will operate continuously.

Remote control
The remote requires a line-of-sight path to allow for the signal to be received by the unit. Position the unit so the receiver lens is visible from the remote control.

The words on the remote correspond to the words on the main unit.

2 x AAA batteries are required
Ensure batteries are inserted in the correct direction

Cleaning

  • The fan requires regular cleaning to ensure trouble free operation.
  • Ensure that the fan is switched off from the supply mains before removing the guard.
  • Unplug the fan from the mains supply before cleaning.
  • Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and dirt.
  • Use a vacuum cleaner to remove dust and fluff from around the grills.
  • Ensure the fan is dry before plugging back into the mains supply.
  • Do not attempt to dismantle the fan. There are no user serviceable parts. For service or repair, contact an authorised electrical service technician.

Proof of purchase
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).

One Year Warranty

Thank you for purchasing this Goldair product. Your product is warranted against faults and manufacture when used in normal domestic use for a period of one year. In non-domestic use Goldair limits the voluntary warranty to three months.

Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.

This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone other than a qualified electrical service technician.

PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.

The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in relation to the goods or services to which this warranty relates.

In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).

Goldair – New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland, 0745
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz

Goldair – Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au

Warranty Card

Support

New Zealand
PO Box 100707,
North Shore Mail Centre,
Auckland, 0745
www.goldair.co.nz

Australia
PO Box 574,
South Morang,
Victoria, 3752
www.goldair.com.au

Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

GOLDAIR User Manuals

Related Manuals