AURABEAT NSP-W1 Wall Mounted Air Purifier User Manual
- June 3, 2024
- AURABEAT
Table of Contents
- NSP-W1 Wall Mounted Air Purifier
- IMPORTANT SAFETY INFORMATION
- WARNING!
- CLEANING AND MAINTENANCE
- PRODUCT
- GETTING STARTED
- USING YOUR PRODUCT
- CARE AND MAINTENANCE
- TROUBLESHOOTING
- WARRANTY AND SERVICE
- After-sales Warranty
- TECHNICAL SPECIFICATIONS
- FCC Warning
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
NSP-W1 Wall Mounted Air Purifier
User Manual
NSP-W1 Wall Mounted Air Purifier
- Thank you for purchasing this air purifier.
- Please read this manual carefully before using.
- Please read carefully after reading for future reference.
IMPORTANT SAFETY INFORMATION
Thank you for choosing our products. We are sure you will find your new
product is pleasure to use.
BEFORE USING THIS DEVICE, READ THIS MANUAL CAREFULLY. KEEP THIS MANUAL AND
PRODUCT INFORMATION SAFE AND NEARBY FOR FUTURE REFERENCE.
Warning
-
Caution.do not defeat interlock. Attentioncne pas nuire alaction du veroullage de securite.
-
Waming:disconnect power supply before servicing.
Averissement.couper lalimentation avant de proceder au depannage. -
Caution: this equipment should be inspected and collector cells should be cdleaned in accordance with manufacture’s instructions,on aregular basis t o prevent excessive accumulation of dust parides that can resultin flashover or a risk of fire . Attentioncet appareil deverait faire L’OB/ET D’UNE inspection etles fiters devralent etre ettoyes conformement aux instructions du fabricant,de facon reguliere, afnd’empecher une accumulation excessive de poussiere.
-
Caution: the 8-hour twa(time weighted,average)ozone for this product shall be 0.001PPM when tested in a30m chamber refer to safety instructions in manual for mode information. Attentionla mpt de 8 hours(moyenne dansle temps)ozone pour ceproduit doit etre 0.001PPM lorsqul est teste dans une chambre de 30m.Reportez-vous aux instrucions desecuritedansle manuel pour plus dinfomations.
-
WARNDNG
-
DISCONNECT POWER SUPPLY BEFORE SERVICING AVERIISSEMENT
-
COUPER L ALIMENTATION AVANT DE PROCEDER AU DEPANNAGE. CAUTION
-
THIS EQUIPMENT SHOULD BE INSPECTED,AND COLI ECTOR CELLS SHOULD BE CLEANED IN ACCORDANCE WITH MANUFACTURER’S INSTRUCTIONS.ON AREGUL AR S BASIS TO PREVENT EXCESSIVE ACCUMUL ATION OF DUST PARIICLES THAT CAN RESULT IN FL ASHOVER OR A RISK OF FIRE ATTENTION
-
CET APPAREIL DEVRAIT FAIRE L’OBJET D’UNE DNSPECTION ET LES FILTRES DEVRAIENT ETRE NETTOYES CONFORMEMENT AUX DNSTRUCTIONS DU FABRICANTDE FACON REGULIERE AFND’EMPECHER UNE ACCUMUL AIION EXCESSIVE DE POUSSIERE.
CAUTION -
THE 8-HOUR TWACTIME WEIGHITED AVERAGE) OZONE FOR THIS PRODUCT SHALL BE 0.001PPM WHEN TESTEDIN A 30m CHAMBER REFER TO SAFETY INSTRUCTIONS IN MANUAL FOR MORE INFORMATION.
ATTENTION: LAMPT DE S HEURSQMOYENNE DANS LE TEMIPS) OZONE POUR CE PRODUIT DOIT EIRE 0.001PPM LORSQUL EST TESTE DANS UNE CHAMBRE DE 30m’. REPORTEZ-VOUS AUX DNSTRUCTIONS DE SECURITE DANS LE MANUEL POUR PLUS DIDNFORMATIONS.
WARNING!
WARNING
We have provided many important safety messages in this manual and on your
appliances. Always read and follow all safety messages.
The manufacturer declines any liability for failure to observe these safety
instructions, for inappropriate use of the appliance or incorrect setting of
controls.
This is the safety alert symbol. This symbol alerts you to potential hazards
that can kill or hurt you and others. All safety messages will tell you what
the potential hazard is, tell you how to reduce the chance of injury, and tell
you what can happen if the instructions are not followed.
The appliance can only be used safety if it is correctly installed according
to the safety instructions.
The appliance is not intended for use outdoor or on wet surfaces.
Do not leave the appliance unattended during operation.
Very young children (0-3 years) and pets should be kept away from the
appliance. Young children (3-8 years) should be kept away from the appliance
unless continuously supervised. Children from 8 years old and above and
persons with reduced physical, sensory, or mental capabilities or lack of
experience and knowledge can use this appliance only if they are supervised or
have been given instructions on safe use and understand the hazards involved.
Children must not play with the appliance. Cleaning and user maintenance must
not be carried out by children without supervision.
Keep packaging, plastic film and small parts away from children. PERMITTED USE
AND INSTALLATION &Connect and operate the appliance only in accordance with
the specifications on the rating plate.
The appliance is not intended to be operated by means of an external switching
device, such as a timer, or separate remote-controlled system.
When installing the appliance, check that the power cord or plug is not
trapped or damaged.
Do not use cord extensions, multiple socket strips nor non-approved adapters.
Never let the power cord encounter hot appliance parts or hot sources.
Never let the power cord encounter sharp points or edges.
Never kink, crush, or modify the power cord. Turn off and unplug the device to
replace filter.
Do not allow objects to enter, cover or block the air inlets and air outlets.
When unplugging the appliance from the power supply, do not pull on the power
cord, pull on the power plug. Do not alter the power plug in anyway. Do not
use the appliance near fire or hot surfaces.
CLEANING AND MAINTENANCE
Ensure the appliance is switched off and disconnected from the power supply
before performing any maintenance; never use steam cleaning equipment-risk of
electric shock.
Repairs and maintenance can only be carried out by one of our trained after-
sales techni-cians. If the appliance is not working properly, unplug the
appliance from the power supply and contact your local after-sales service.
Do not use abrasive or harsh cleaners such aswindowsprays, scouring cleansers,
flammable fluids, cleaning waxes, concentrated detergents, bleaches, or
cleansers containing petroleum products on plastic parts, interior and door
liners, or gaskets. Do not use paper towels, scouring pads or other harsh
cleaning tools.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is recyclable and is marked with the recycle symbol
PRODUCT
-
Display & Control Panel
-
Air outtet
-
Airintet
-
Filters
-
Optional Free Stand Support
-
Dust Sensor, Temperature Sensor &
Humidity Sensor -
Removable W a l l mounted Accessory
GETTING STARTED
a• What’ s Included
• Air Purifier
• Remote Control
• H y b r i d Filter
• Removable Fr e e Stand
• Optional Wall Mounted Bracket
• x Screws ( D r y Wall Type)
• x Screws (Concrete Wall Type)
• 1x User Manual
Make sure you remove all packaging for filters and products before using the
appliances.
WALL MOUNTED INSTALLATION
Findanideal location to maximize the air cleaning power. The location should b
e farthest
a. away from the room’ s HVAC return vent, windows, and doorways.
b. Suggested installation height 5 ft from the floor.
c. Locate the closest electrical wall outlet. oF
d. It is suggested to install the wall mounted bracket on a concrete wall/dry
wall. Mark the position of the screw holes : ( 6 screw with a pen by the wall
bracket supplied).e. Drill holes per the screws marked on the
wall. Insert plastic mounting i n t o the wall. Mount the supporting bracket
on the wall and tighten the screws asshown in the installation diagram (Figure
2) below. f.Install the mounting bracket on the wall. g- Mountthe appliance on
to the bracket.
FREE STAND INSTALLATION
a Find an ideal location to maximize the air cleaning power. The location
should be farthest away from the room’ s HVAC return vent, windows, and
doorways.
b Locate the closest electrical wall outlet.
c Take out the free stand accessories from the package. Tightened the screws
provided as shown in below installation diagram . (Figure 5)d.
Tightened the 4 screws provided a t the back (as shown in figure 6) and
installation is completed.
FILTER INSTALLATION
a. Open the front panel with 2 hands.
b. Take out the filter and remove the packages. c. Put the filter back into the
air purifier and close the front panel with 2 hands. d. Take out the supplied
power cord and plug in to the power supply.
WI-FI APPS CONNECTION
a.Download the apps from the APPS store/ google play
b.Press a nd hold the Wi-Fi icon for 5 seconds until you hear the sound to
activate this function. The Wi-Fi logo will be on once the function is
activated.
c. If the APPS is not activated successfully within 3 minutes, please
deactivate the Wi-Fi function, and retry again for the APPS connection.
USING YOUR PRODUCT
(i)Control Panel
- Sleep Mode
- Fan Speed
- Power
- Uv
- Child Lock
- Timer
- Filter Replacement
- Plasma
- Auto Mode
-
Air Quality Indicator
(1-79 = Green; 80-199 = Yellow; >200 = Red) -
P N 2 . 5 Indicator
-
Temperature
-
Humidity
-
Wi-Fi
-
Fan Speed
Operating Instructions
Icon | Function | Function |
---|---|---|
Power | 1 , Press the power button to turn on/turn off the product. |
2. The“ On/Off”, “ Auto ”,“ PM2.5”, “Temp”, “ Humidity” indicators will beon
once product is turned on.
| Fan Speed/ Intelligent Mode| 1 , Adjust the fan speed from 1 to 3 by
pressing the button.
2. The fan speed indicator w i l l be on i f the fan speed function is
activated.
| Intelligent Mode| 1 . Press [AUTO] button and the machine will turnin to
the intelligent mode. The fan speed can be adjusted according to the air
quality. Details as below:| Air Quality Indicator Light| Green| Yellow| Red
---|---|---|---
Fan Speed Indicator| Auto| Auto| Auto
Fan Speed| Low| Middle| High
2. Repress [AUTO] button and the Auto mode will be deactivatede
| Timer| 1. Press “Timer” button to set the timer on function, from 1 to 24
hours.
| Filter Replacement Reminder| 1. The replacement indicator w i l l b e on
after working for 4320 hours to remind you for filter replacement.
2. To reset the reminder , press and h o l d the button for 3 seconds to
rest the alarm and an “acoustic” sound will be heard to confirm.
| Child Lock| 1, Press and hold the button for 3 seconds to activate this
function.
2. To de-activate this function, press and hold the button for 3 seconds.
| Plasma| 1. Press and hold this button to activate this function.
2. Press and hold this button to de-activate this function.
| Sleep Mod Mode| 1 , Press the button to activate this function. The
appliance will start to work at the lowest speed with UV and plasma kept a t
the previous setting.
2. Timer function is disabled.
| UV Light| Press the “UV light” button once toturn iton and press again
to turn it off
| Standby Mode| Once the product is connected, an acoustic sound will be
heard to confirm. The control panel will becon for 2 s and product is under
standby mode.
| Auto Mode. (or Light Sensor
Mode)| Press the “Auto” once to t u r n on this function.
1, Under Auto mode, the appliance will be on under the sleep mode if the
environment is dark.
ifthe environmentis lighted, the appliance w i l l turned on to the highest level with plasma on for 10 minutes to
sterilize and return to sleep mode afterwards.
CARE AND MAINTENANCE
Note
-
Never immerse the appliance in water or any other liquid. Cleaning
-
Never use abrasive, aggressive or flammable cleaning agents to clean any part of the appliances as these agents may damage the air purifier.Do not wash the main filter with any liquid(including water). It is not washable.
Cleaning -
Wipe the exterior and air outlet of the air purifier with a soft, clean, damp cloth.
-
Open the front door, clean the inside of the air pu rifler with a soft, clean cloth.
Cleaning Schedule Frequency| Cleaning method
---|---
When necessary| •Wipe the plastic components of the appliance with a soft and dry cloth
•Clean or v-acuum the air outlet
Every two months| •Clean the dust sensor with a soft brush
The ® displays on the screens| •Replace the filter
Air Quality Sensor Recommended to clean the sensor every 2 months or when necessary for optimal functioning of the air purifier.
- Pull out the protective cover located on the upper right. Please refer to below drawing for reference
- Clean the sensor with a damp cotton swab and make sure that the sensor is dry before closing the protective cover.
TROUBLESHOOTING
Problem| Symptoms|
Recommended Solution
---|---|---
The appliance is notworking| The product is not connected.| Please make sure
that the power cord is connected to power supply.
The air outflow is significantly weaker than before| The air inlet is
covered.| Ensure that the air inlet fs not blocked.
The surface of the filter is dirty.| Clean the air inlet.
Clean the surface of the air filter.
Replace a new air filter if the airflow is not increased after all cleaning.
The air outflow is significantly stronger than before| The filter is not
installed correctly.| Please install the filter correctly.
The filter is damaged.| Replace a new filter.
Product is very noisyduring operation| The air inlet is covered.| Please
remove the objects covering the air Inlet.
There is object within the air outlet.| Please clean the air outlet.
WARRANTY AND SERVICE
- After the free warranty, you can contact the company to provide maintenance service.
- Following conditions are not covered b y the warranty:
a ) Damage due to man-made factors
b) Damage due to unauthorized disassembly o r repair
c) Normal wear and tear after usage
d) Filter (unless the filter was damaged before used)
e) Damage due toimproper installation and usage
After-sales Warranty
WARRANTY
Aurabeat North America products are backed by some of the most comprehensive
warranties in the industry. Aurabeat North America warrants that the Aurabeat
Wall Mounted Air Purifier shall b e free from defects inmaterial and
workmanship under normal use and service.
Residential & Commercial Warranty for Aurabeat Wall Mounted Sanitizing Air
Purifier – 3-year limited warranty
Includes Base Model numbers: NSP-W1 100% Coverage o f defects o r malfunctions
of all electronic parts and labor for the entire product excluding consumable
filters for the first three years from original date of purchase. Exclusions
and Limitations
- Aurabeat North America warrants its products to befree from manufacturing defects under normal use and service. This warranty is extended only to the ORIGINAL PURCHASER.
- Aurabeat North America’ s obligations under this warranty are limited to repairs o r replacement, at Aurabeat North America’ s option, of products or parts found to be defective, provided that such products were properly installed and used in accordance with instructions. Aurabeat North America reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. Aurabeat North America will not charge for labor or parts in connection with warranty
repairs for the first three years from date of purchase on all products except those that may be subject to heavy commercial use limitations.3. Aurabeat North America is not responsible for the cost of removal, return (shipping) and/or reinstallation of products. This warranty does NOT apply to:
– Damage orloss which occurs during shipment.
- Damage orloss sustained through any natural or man-made causes beyond the control of Aurabeat North America, including but not limited tofire , earthquake, floods, etc.
– Damage orloss resulting from negligent orimproper installation including installation of aunitin a harsh o r excessively hazardous environment.
– Damage or loss resulting from removal, improper repair, modification of the product, or improper maintenance including damage caused by improper cleaning and exchanging of filters
– Damage or loss resulting from acts which are not the fault of Aurabeat North America or which the Product is not specified to tolerate. - Normal wear and tear usage on the appliance or damages and wear to the filter during use or
maintenance.
AThis warranty gives you specificlegal rights. You may have other rights which vary from state to state.
THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY AURABEAT NORTH AMERICA. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO THE PURCHASER. AURABEAT NORTH AMERICA SHALL NOT BE RESPONSIBLE FOR LOSS OF USE OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR XPENSES INCURRED BY THE PURCHASER OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL OR COSTS OF REPAIRS BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALL YSTATED ABOVE. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY, ARE EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS, SO THE ABOVE L MITATION AND EXCLUSION MAY NOT APPLY TO YOU.
How to Obtain Service
To obtain repair service under this warranty, you must contact an authorized Aurabeat North America o r Brondell Service Center to obtain an RMA (Return Merchandise Authorization) number. Proof of purchase in the form of a copy of the original receipt must accompany the returned unit for the warranty to be valid. Take or ship theunit pre-paid to the closest Aurabeat North America or Brondell authorized service center along with the RMA number and proof of purchase. To obtain an RMA number, contact the Brondell Service Center a t 1-888-542-3355 or by email support@brondell.com or
Aurabeat North America by email support@aurabeat-us.com
TECHNICAL SPECIFICATIONS
Item | Specifications |
---|---|
Model No. | NSP-W1 |
Voltage | 220V – 50Hz |
Rating Power | 85W |
Recommend Coverage | 30-40n,f |
CADR | 360 m3/11 |
Noise Level | 50dB |
Machine size | 23.68.417.2inch (Free Standing) |
23.66.615.9inch(Wall-mounted)
FCC Warning
This device complies w i t h part 15 o f the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes o r modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 o f the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more o f the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer o r an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set f o r t h for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Aurabeat Technology Limited
® aurabeat-tech.com
+852 26688883
11H, Golden Bear Industrial, 66-82 Chai Wan Kok Street, Tsuen Wan, N .T .,
Hong Kong
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>