AURABEAT NSP-X2 AG Pro Medical Grade Silver Ion Antiviral Air Purifier User Manual

AURABEAT NSP-X2 AG Pro Medical Grade Silver Ion Antiviral Air Purifier

Product Information

The air purifier is an electronic device that helps to improve the quality of air in a room. It works by removing pollutants and contaminants from the air, such as dust, smoke, and allergens. The air purifier is designed to be used in indoor spaces, such as homes, offices, and bedrooms. It comes with an electronic plug that connects the machine to a power source.

Product Usage Instructions

1. Before using the air purifier, make sure there is at least 5cmspace at the back of the machine to avoid bending the electronic plug connected to the machine. This will also prevent damage to the cable, which may cause short circuit or overheat.
2. Avoid placing the air purifier too close to the wall, as this can affect the operation of the air quality sensor. It is recommended to leave a distance of at least 30cm between the machine and the wall.
3. To prevent damage to the cable, avoid pressing the power cable plug connected to the machine. Make sure the plug is firmly inserted into the power socket.
4. Turn on the air purifier by pressing the power button. The machine will start working immediately to clean the air in the room.
5. It is recommended to use the air purifier for a few hours each day to maintain good air quality in the room. You can adjust the fan speed and timer settings according to your preferences.
6. When not in use, turn off the air purifier and unplug it from the power source. Clean the filter regularly to maintain optimal performance.

AIR PURIFIER AND ACCESSORIES

PRODUCT FEATURES

QUICKSTART GUIDE

1. Carefully unpack your air purifier.
2. Remove the front panel.
3. Remove filters from protective plastic wrap.
4. Insert the nano-crystalline filter.
5. Insert the pre-filter and high efficiency silver ion air filter.
6. Insert the front panel.
7. Plug the power cable to the air purifier.
8. Insert the power cable into an electrical outlet.
9. Press on/off button to switch on the air purifier.

PRECAUTION

• Disassembly is prohibited.

• To avoid danger, do not disassemble and modify the product if you are not a professional mechanic.

• Check the power cable and plug regularly.

• Dust can be accumulated over time on the surface of the plug, which can cause poor insulation due to humidity. Unplug it regularly and clean the plug with a dry cloth. Unplug it from the electrical outlet when not used for a long time.

• Do not use on improper AC.

• Damage or danger could be resulted from using it on improper power sources. The electrical plug must be plugged in al the way.

• Otherwise, fire hazards could be resulted from overheating due to exposed plug prongs.

• Do not use a damaged plug or a loose electrical outlet.

• Do not use the appliance in wet or highly humid surroundings such as the bathroom to prevent leakage current, electric shock and fire hazards.

• Do not use the appliance when you have used spray-type insecticides.

• After using insecticides, ventilate the room sufficiently before using the air purifier.

• Otherwise, chemicals wil be accumulated inside the machine and affect your health.

• Do not use alcohol or organic solvents to clean any part of the appliance to prevent damage to the product, electric shock, fire hazards, etc.

• Make sure there is at least 5cm space at the back of the air purifier so as not to bend the electronic plug connected to the machine to avoid damaging the cable, which may cause short circuit or overheat.

• Additionally, it is important to avoid placing the machine too close to the wall, as this can affect the operation of the air quality sensor. To prevent damage to the cable, avoid pressing the power cable plug connected to the machine.

• To avoid electric shock or damage, keep foreign object away from the air inlet and outlet to avoid contacting the inner parts of the appliance.

• Always unplug the air purifier before cleaning the unit to protect against injuries and danger. To avoid electric shock, do not touch
  the electrical plug with a wet hand.

• To prevent short circuit and electric shock, do not immerse in water or other liquids.

• Do not use in places with oily residues, smoke, or fumes, such as the kitchen to prevent damage to the product.

• The appliance shall not be used as an exhaust fan.

• When used in the same space with combustion devices, make sure the room is well-ventilated to prevent carbon monoxide poisoning as the appliance does not remove carbon monoxide.

• Unplug the appliance by pulling the plug but not the cable to prevent damage to the cable, short circuit, electric shock, fire hazards, etc.

• Close doors and windows for efficient and rapid air cleaning.

• Do not use the appliance near fire or combustible materials.

NOTE
Unplug immediately if any of the following conditions occur:

• the switch does not work
• short circuit occur
• the electrical cable or plug becomes overheated
• a burnt smell, unusual sound or vibration is produced
• anything unusual or failures occur

OPERATING INSTRUCTIONS

Switch on
Touch the power button to switch on the appliance.
After switching on, the light indicator is always on. When a corresponding function is used, the light indicator under the icon is always turned on. The area displaying ” – – – ” 1 Os after switching on will show the PM2.5 value.
The appliance operates under the auto mode by default.
The airflow is adjusted according to PM2.5. Auto mode is set as follows:

• Changing fan speed
  Touch the “Fan Speed” button repeatedly to disable auto mode and manually change the speed among three settings (speeds 1-3). You can reselect auto mode by touching the button after speed 3.

• Set the timer
  Touch the ”Timer Button” repeatedly to choose the number of hours you want the appliance to operate (1-12 hours) and the switch-off time. When the timer is on, the light indicator is on.

• Use sleep mode

  • Touch the “Sleep” button to enter sleep mode. The air quality indicator will be dimmed. All the light indicators will be off except the sleep indicator.
  • The appliance operates under speed 1 in sleep mode. Disable sleep mode and return to previous setting by touching any button.

• Use sterilizer
  Touch the ” Sterilize” button to turn on/off the UV sterilizer.

• Set the child lock
  Touch the “Child Lock” button to activate the lock function and all the other buttons will not be responsive. Press and hold for 3 seconds to close.

• Switch on plasma
  Touch the “Plasma” button turn on/off the plasma function.

Replace the filter

Tips on replacing the filter
When the accumulated usage time of the filter reaches 2000 hours, the filter replacement indicator is on.
Filter installation order

1. Nano-crystalline filter
2. Pre-filter and High Efficiency Silver Ion Air Filter

Steps to replace the filter

1. Open the front panel and remove the existing filters
2. Insert the nano-crystalline filter
3. Insert the pre-tilter and High Efficiency Silver Ion Air Filter.
4. Insert the front panel and the filter is successfully replaced

After replacing the filter, turn off the filter indicator.

AIR PURIFYING FUNCTIONS

1. Pre-filter: captures hair, fiber, large particles, dander, etc., can be vacuumed and reused.

2. High Efficiency Silver Ion Air Filter: This HEPA filter is an H12 filter by European standard, good at capturing small particles. It has low penetration, large capacity for holding dust, high clean air delivery rate can effectively filter smoke and dust, especially for PM2.5, efficiently filtering particles as small
   as 0.01 µm. The filter combined with silver ions can effectively kill human coronavirus, general virus, bacteria and mold.

3. Nano-crystalline Filter: Sepiolite, diatomaceous earth, and other natural rare non-metallic minerals are used to make nanocrystalline materials which clear harmful gases, formaldehyde, benzene, VOC and other smelly pollutants. The nanocrystalline materials have many pores, good at absorbing nanoparticles, such as formaldehyde, ammonia, and benzene (between 0.4-0.62 nanometers). As these compounds are nano-sized polar molecules, they can be quickly absorbed.

4. UV disinfection layer : UV lamp sterilizes the air and eliminates microorganisms.

5. Plasma purification: The positive and negative ions generated by the plasma generator neutralize in the air and produce huge energy, which results in the change of the microorganism structure around or the conversion of energy, thereby destroying the microorganisms. As the number of negative ions is greater than that of positive ions, excess negative ions are still floating in the air, which can remove smoke, dust, smell, and improve air quality and health.

TECHNICAL SPECIFICATIONS

CLEANING AND MAINTENANCE

• Unit : Please regularly wipe the surface of the machine with a soft cloth moistened with clean water and detergent and clean the air inlet and outlet with a brush.

• Sensor Cleaning: Regularly clean the lens of the sensor and the surface of the sensor with a moist cotton swab, and then use a dry cotton swab to remove any moisture left on the sensor.

• Filter Replacement: Filter replacement is reminded by a built-in program.
  Each layer of the filter can be used for about 6-18 months. If the environment is seriously polluted, the filter needs to be replaced earlier. Filters can be ordered from our website or designated distributors.

• Filter Cleaning: The filter needs cleaning regularly to ensure the best performance.
  Pre-filter can only be cleaned with a vacuum cleaner.

TROUBLESHOOTING

When the following problems occur, try possible solutions listed below before returning it for repair:

|
---|---
The appliance does not work when switched on.
The touchscreen controller does not work.|

1. Check if the electrical cable is plugged into a socket.
2. Check if the electrical cable is plugged into the appliance.
3. Check if the front panel is inserted properly.

When in auto mode, the air quality indicator/ PM2.5 value is always red or high.|

1. The appliance may be affected by moisture, oil residues, smoke, fumes, spray, etc. Place the appliance in another environment to test again.
2. Take off the lid on the sensor and clean the lens with a soft cloth.

Unpleasant smell cannot be removed.|

1. Check if the filter is expired or has adsorbed pollutants with bad smell.
2. The nano-crystalline filter can be reused after exposure to sunlight. If the problem persists.change the filter.

Particulates in the air cannot be removed.
The appliance is extra loud when running.| Use a vacuum cleaner to clean the pre-filter. If the problem persists, change the filter.
The air purifier does not respond to air pollutants in the room.| The appliance may be placed in the wrong place that prevents pollutants from being absorbed. Place it in another spot or change to manual mode and increase the fan speed to maximum.

AFTER SALES SERVICE

1. Free one-year warranty.
2. After the free warranty, you can contact the company to provide maintenance services.
3. The following conditions are not covered by the warranty:
   • Damage due to man-made factors
   • Damage due to unauthorized disassembly or repair
   • Normal wear and tear after usage
   • Filter (unless the filter is damaged before used)
   • Damage due to improper installation and usage

Note :
In order to protect your rights, please pay attention to the following information.

1. Please register your purchase online with complete, correct and authentic information within 30 days after purchase to get a one-year free warranty.
2. Keep the purchase receipt or record.
3. Terms and details for the warranty are listed on the online registration page.
4. The appliance should not be used by persons with physical, sensory or mental disabilities and those who lack experience or knowledge (including children), unless they are under the supervision of another person in charge of safety or have provided instructions for the use of the appliance.

AFTER SALES WARRANTY

Please visit
www.aurabeat-tech.com within 30 days after purchase to register your product to get a one-year warranty.

1. Warranty Terms
   • From the date of purchase, the warranty period is 1 year, during which maintenance service is free of charge (except for force majeure events, external factors).
   • The complimentary gift (if any) is not covered by the warranty.
   • Certificate: Purchase receipt, shopping records issued by the company, and receipt are all acceptable.
2. Spare parts
   Spare parts are provided free of charge during the warranty and charged at market prices after the warranty. The filter is not considered as a spare part. Free warranty is not applicable to filter unless it is damaged.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>