AURABEAT NSP-PCO AG+ Pro Medical Grade Silver Ion Antiviral Air Purifier User Manual

AURABEAT NSP-PCO AG+ Pro Medical Grade Silver Ion Antiviral Air Purifier

Product Information

The air purifier is an electronic device that helps to improve indoor air quality by removing pollutants such as dust, pollen, and smoke from the air. It features an air quality sensor that detects the level of pollutants in the air and adjusts the device’s operation accordingly. The device is powered by an electronic plug connected to a power source.

Product Usage Instructions

1. Before using the air purifier, ensure that there is at least 5cm space at the back of the device to prevent damage to the electronic plug connected to the machine. Bending the plug could cause damage to the cable, which may lead to a short circuit or overheat.
2. It is important not to place the machine too close to a wall as this can affect the operation of the air quality sensor.
3. Avoid pressing the power cable plug connected to the machine to prevent damage to the cable.
4. Plug in the electronic plug connected to the machine into a power source.
5. Turn on the device using the power button or switch.
6. Allow the air purifier to run for a few minutes to improve indoor air quality.
7. Periodically clean or replace the air filter to maintain optimal performance.

AIR PURIFIER AND ACCESSORIES

DISINFECTION PRINCIPLE AND PRODUCT STRUCTURE

Disinfection Principle
This product circulates air to drive the virus and microorganism in air into the sterilizer, through a series of air disinfection and purification mechanisms, pre-filter and high efficiency silver ion filtration layer, high power UVC ultraviolet light, photocatalytic oxidation, and plasma purification to enable high efficiency air disinfection and purification. Since the ultraviolet lamp is sealed in the disinfection chamber, the air can be disinfected when it passes through the disinfection chamber, so the product has no ultraviolet light leakage. This product is composed of pre-filter, high efficiency silver ion filter, Photocatalytic oxidation layer, high intensity UV sterilization layer, plasma purification, as well as the combination of motor, wind wheel, control module and air duct accessory.

QUICKSTART GUIDE

PRECAUTIONS

WARNING

• Disassembly is prohibited.
• To avoid danger, do not disassemble and modify the product if you are not a professional mechanic.
• Check the power cable and plug regularly.
• Dust can be accumulated over time on the surface of the plug, which can cause poor insulation due to humidity. Unplug it regularly and clean the plug with a dry cloth. Unplug it from the electrical outlet when not used for a long time.
• Do not use on improper AC.
• Damage or danger could be resulted from using it on improper power sources.
• The electrical plug must be plugged in all the way.
• Otherwise, fire hazards could be resulted from overheating due to exposed plug prongs.
• Do not use a damaged plug or a loose electrical outlet.
• Do not use the appliance in wet or highly humid surroundings such as the bathroom to prevent leakage current, electric shock and fire hazards.
• Do not use the appliance when you have used spray-type insecticides.
• After using insecticides, ventilate the room sufficiently before using the air purifier.
• Otherwise, chemicals will be accumulated inside the machine and affect your health.
• Do not use alcohol or organic solvents to clean any part of the appliance to prevent damage to the product, electric shock, fire hazards, etc.
• To avoid electric shock or damage, keep foreign object away from the air inlet and outlet to avoid contacting the inner parts of the appliance.
• Always unplug the air purifier before cleaning the unit to protect against injuries and danger.
• To avoid electric shock, do not touch the electrical plug with a wet hand.
• To prevent short circuit and electric shock, do not immerse in water or other liquids.
• Do not use in places with oily residues, smoke, or fumes, such as the kitchen to prevent damage to the product.
• The appliance shall not be used as an exhaust fan.
• When used in the same space with combustion devices, make sure the room is well-ventilated to prevent carbon monoxide poisoning as the appliance does not remove carbon monoxide.
• Unplug the appliance by pulling the plug but not the cable to prevent damage to the cable, short circuit, electric shock, fire hazards, etc.
• Make sure there is at least 5cm space at the back of the air purifier so as not to bend the electronic plug connected to the machine to avoid damaging the cable, which may cause short circuit or overheat.
• Additionally, it is important to avoid placing the machine too close to the wall, as this can affect the operation of the air quality sensor. To prevent damage to the cable, avoid pressing the power cable plug connected to the machine.
• Close doors and windows for efficient and rapid air cleaning.
• Do not use the appliance near fire or combustible materials.

NOTE
Unplug immediately if any of the following conditions occur:

• the switch does not work
• short circuit occur
• the electrical cable or plug becomes overheated
• a burnt smell, unusual sound or vibration is produced
• anything unusual or failures occur

OPERATING INSTRUCTIONS

• Switch on
  Touch the power button to switch on the appliance.

• Changing fan speed
  Touch the “Fan Speed” button repeatedly to disable auto mode and manually change the speed among three settings (speeds 1-3). You can reselect auto mode by touching the button after speed 3.

• Set the timer
  Touch the “limer Button” repeatedly to choose the number of hours you want the appliance to operate (1-12 hours) and the switch-off time. When the timer is on, the light indicator is on.

• Use sleep mode

1. Touch the “Sleep” button to enter sleep mode. The air quality indicator will be dimmed. All the light indicators will be off except the sleep indicator.
2. The appliance operates under speed 1 in sleep mode. Disable sleep mode and return to previous setting by touching any button.

• Use sterilizer
  Touch the ” Sterilize” button to turn on/off the UV sterilizer.

• Set the child lock
  Touch the “Child Lock” button to activate the lock function and all the other buttons will not be responsive. Press and hold for 3 seconds to close.

• Switch on plasma
  Touch the “Plasma” button turn on/off the plasma function.

• Replace the filter
  Tips on replacing the filter When the accumulated usage time of the filter reaches 2000 hours, the filter replacement indicator is on.

Steps to replace the filter:

TECHNICAL SPECIFICATIONS

CLEANING AND MAINTENANCE

• Unit: Please regularly wipe the surface of the machine with a soft cloth moistened with clean water and detergent and clean the air inlet and outlet with a brush.
• Sensor Cleaning: Regularly clean the lens of the sensor and the surface of the sensor with a moist cotton swab, and then use a dry cotton swab to remove any moisture left on the sensor.
• Filter Replacement: Filter replacement is reminded by a built-in program.

Each layer of the filter can be used for about 6-8 months. If the environment is seriously polluted, the filter needs to be replaced earlier. Filters can be ordered from our website or from designated distributors. Clean the UV lamp Filter Cleaning: The filter needs cleaning regularly to ensure the best performance. Pre-filter can only be cleaned with a vacuum cleaner. The nano- crystalline filter can be cleaned by exposure to sunlight for 1 to 3 hours every 2 months. UV lamp: light intensity ultraviolet radiation will affect the height of the air disinfection effect, once per month should be wiped with alcohol cotton ball UV lamp at least. To ensure that the ultraviolet lamp is not affected by dust and radiation intensity.

TROUBLESHOOTING

When the following problems occur, try possible solutions listed below before returning it for repair:

AFTER-SALES SERVICE

1. Free one-year warranty.
2. After the free warranty, you can contact the company to provide maintenance services.
3. The following conditions are not covered by the warranty:
   • Damage due to man-made factors
   • Damage due to unauthorized disassembly or repair
   • Normal wear and tear after usage
   • Filter (unless the filter is damaged before used)
   • Damage due to improper installation and usage

Note: In order to protect your rights, please pay attention to the following information.

1. Please register your purchase online with complete, correct and authentic information within 30 days after purchase to get a one-year free warranty.
2. Keep the purchase receipt or record.
3. Terms and details for the warranty are listed on the online registration page.
4. The appliance should not be used by persons with physical, sensory or mental disabilities and those who lack experience or knowledge (including children), unless they are under the supervision of another person in charge of safety or have provided instructions for the use of the appliance.

AFTER-SALES WARRANTY

Please visit
www.aurabeat-tech.com within 30 days after purchase to register your product to get a one-year warranty.

Warranty Terms

• From the date of purchase, the warranty period is 1 year, during which maintenance service is free of charge (except for force majeure events, external factors).
• The complimentary gift (if any) is not covered by the warranty.
• Certificate: Purchase receipt, shopping records issued by the company, and receipt are all acceptable.

Spare parts
Spare parts are provided free of charge during the warranty and charged at market prices after the warranty. The filter is not considered as a spare part. Free warranty is not applicable to filter unless it is damaged.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>