WOLFBOX D07 Mirror Dash Cam Instruction Manual
- June 3, 2024
- WOLFBOX
Table of Contents
WOLFBOX D07 Mirror Dash Cam Instruction Manual
Package Connects
Following items are included in the package, if any items are missing or damaged, contact WOLFBOX immediately.
About the Micro SD Card
When using a new MicroSD card, be sure to format it on the main body.
- Do not remove or insert a Micro SD card while the power is on.
- Use a Micro SD card with Class 10 or higher(8GB-128GB). We Recommend 64GB SAMSUNG Class 10, U3 Speed Micro-SD Card.
- For stable use, it is recommended to format the micro SD card regularly. Recommend: Once a month.
- Please press the”!§” button once to enter the menu settings, Then press the down button to scroll down until you see FORMAT, press the “!§” button to confirm to format the SD card.
- This product will check the Micro SD card at start-up and will announce if it is not inserted or damaged, that can prevent missed shots.
How to insert and remove a card
-
To install
Make sure the camera is turned OFF First. Then facing towards the front of the camera (Lens Side). Then insert the memory card half way in. Then use the finger nail or a paper clip to push the card all the way inward until it clicks and locks in place. -
To remove
To remove the Micro SD card, gently push its edge inward until it clicks, and then pops out, then simply pull it out of the slot.
Installation
The camera comes with the default settings which allows you to start using
your camera right out of the box without changing any settings. Make sure to
format the memory card before first time use.
How to install the main body
-
Installation Position-Most people will install D07 next to the rear view mirror and opposite side from the drive. First, Stop the engine where there is some light and in a safe place.
-
Make sure to clean your windshield from the dust particles and attack attach the electrostatic sticker to the windshield.
-
Peel off the 3M tape attached to the GPS built-in bracket and attach it on the electrostatic sticker on the windshield.
About electrostatic Sticker
• Since the adhesive strength is strong on both sides and it is difficult to peel off once it is pasted, it will be troublesome if the pasting position is incorrect.
Therefore, we design the electrostatic sticker to attached to the windshield first, then stick the bracket with 3M Adhesive on the electrostatic sticker. You can easily readjust location by sticking the 3M Adhesive on electrostatic sticker and peel it off.
• To strengthen the fixing force, do not attach the main body and leave it for 24 hours or more.
• Re-sticking may weaken the adhesive strength of the tape and cause it to fall off. If you need more accessories, please CONTACT US. -
Use the power cord to connect the Type-C Port of the product to car’s cigarette lighter socket.
How to install the rear camera
We recommend install the rear camera above the license plate.
-
Fix camera with 3M adhesive Find a best location, tear off the 3M adhesive on the rear camera, fix the rear camera near by the car license plate lamp. (if you need to adjust the angle, please attach the rear camera bracket to the rear camera and tighten it with screws first).
-
Remove the Panel
Remove your trunk’s interior panel to expose the cars rear wiring chambers. Pop open your trunk and look for a solid
interior panel covering the opposite side of your license plate mounting area.
Then, insert a trim removal tool or other thin device behind the panel and pry it off. -
Snake the cable
Use a trim removal tool to pop out tailgate trim, then run the cable from outside of the car into the trunk of your car. -
Connect the rear cameras power cable to the extension cable. After snaking your rear camera1s extension cable, connect the power cable to your rear camera’s extension cord.
“The red wire on the rear camera cable does not need to be connected.(Designed for another model of our products) -
Route your rear camera’s power cable to the front of the car. If you’d like, use a trim removal tool to pop out the headlining panel directly above your windshield.
Then, run your cable through the exposed chamber. -
Start the engine and check if the product works properly.
Note: Power on the dash cam with box included car charger, don’t charge it with your own chargers.
HOME SCREEN
Home Screen Status Icons
Power ON/OFF
< Power ON>
- If you tum on the engine (ACC on) while the cigar power adapter is connected, the power will be turned on automatically and the opening screen will be displayed.
- Press and hold the power button to turn off the power during start-up, and then briefly press the power button again to tum on the power of the unit and display the opening screen.
Micro SD card check function
This product will check the MicroSD card at startup and will announce if it is not inserted or damaged, that can prevent missed shots.
- When the engine is turned off the power is automatically turned off.
- If you press and hold the power button while the power is on, the power of this unit will be turned off.
About Time Settings
You can set the GMT time-zone value instead, so the camera will set the date and time based on the GMT value selection when it receives the GPS signal lock Automatically. You can set the daylight saving time by adjust the time-zone.
2- CAMERA MODES
D07 has 2 different camera modes:
- Video mode
- Playback mode
Video Mode
When the engine is turned on, the power is automatically turn on.
Button function in video mode
There are four resolutions:
Front only: 38402160P
Front only: 25601440P
Front 2160P + Rear1080P
Front l 440P + Rear1080P
Playback Mode
Playback mode lets you play your Video file or photos. It can even let you delete or lock any videos while viewing it.
- [Delete Current]: Delete the displayed file
- [Delete All]: Delete all files
*Unable to delete locked file. You can manually unlock and then erase. - [Lock]: Manually lock the display file
- [Unlock]: Manually unlock the displayed files
Photo and Video Files Screen
Play on computer
How to output data on computer:
The video recorded by this product can be displayed in conjunction with Google
Maps by installing the dedicated viewer software on your computer.
- An internet connection is required.
For Android Phone
Please choose to allow when these prompts appear.
For iPhone
If you get this pop up for your iPhone while using WiFi feature, make sure
to tap on “ALLOW” or “OK”
Check/Play date with APP
- You can check and play the data by pressing • on the recording screen to enter the data file.
- On the data file screen, press[Edit],select the file you want to download, and press [Download] to download the file and ave it to the [local album] which you can find on the interface of APP, then you can download to the smartphone album.
You cannot delete the lock file unless unlocked the file manually.
You can select a local album, play the downloaded data, and view it in conjunction with Google Maps.(intermit connection environment is required.)
Edit and share with the APP
You can enter local albums, edit downloaded files and share them in the APP interface.
About the Camera Settings
Short press button to enter the setting interface after power on. In this case, the video recording g will be stopped and you get the. Seating’s Menu.
- [G-Sensor]: Off /low /medium/ high G-Sensor is a 3-axis impact gravitational accelerometer which is designed to detect physical and gravitational forces on the camera. The video will be locked-hi the event when G-Sensor is triggered due to physical or gravitational impact force on the camera, the current loop cycle length of video file will be locked so it will NOT be deleted by loop cycle function.
-
A reminder will be made when drive for 1H/2H/3H/ 4H continuously.
- [Speed Stamp]: Speed stamp on/off
- [GPS Stamp]: GPS stamp on/off
- [GPS Info]: This feature allow you to see your current geographical location in Latitude & Longitude.
- [Rear Cam Flip]: You can flip the angle of the rear camera by 180°.
- [Mirror Flip]: You can Mirror image left and right.
- [APP]: QR code to download the APP
- [WiFi]: WiFi on/ off
- [Language]: This setting allows you to choose your language setting for camera1s firmware.
- [Date/Time]: You do not need to manually adjust the time because GPS will automatically update the time based on your location.
- [Time Zone]: Here you can choose your desired or local time zone setting based on GMT value.
-
[DST]: You can adjust the DAYLIGHT SAVING TIME ON/OFF.
-
[Frequency]: Here you should choose the frequency accordingly to your power supply specification used in your country based on your geographical location.
60 Hz (USA- North America) 50 Hz (Europe – Most Asian Countries -
[Click Tone]: This feature allows you to turn ON/OFF camera button’s beep sound.
-
[Screen Saver]: OFF-This will keep the video ON all the time. 10S/30S/2Min-The screen will turn off, but the recording will remain.
-
[Parking Monitoring]: Requires hardwire kit(sold separately) Does not work without hardwire kit
-
[Format]: This feature will allow you to format inserted memory card, all the data will be deleted.
- [Default Setting]: Here you can restore all the settings to factory default settings.
- [Version]: Here you can check the current firmware version installed on your camera.
We will notify you via Amazon if there is a new software version.
Product Specifications
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>