WOLFBOX G840S Touch-Screen Streaming Mirror Dual Dash Camera User Manual

WOLFBOX G840S Touch-Screen Streaming Mirror Dual Dash Camera

CAMERA OVERVIEW

3

| Rearview mirror port| Port used to connect the rear lens
4| TF card slot| Provide extensible storage(class10 or above, Max 128GB)
5| GPS| GPS Port For GPS Antenna connection
6| Fasteners| The machine can be fixed by eight character Silicone button
7| Display screen| 11.66 inch touch screen display
8| Power button| Short press for off-screen，long press for power-off

SCREEN OVERVIEW

• Recording Standby Status; Recording
• Current Time and Date
•  Menu Setting: Touch and enter to set the screen in your favor(Please pouse recording first)
• Video/Photo Playback: Playback the video & Photo
• Start/Stop Recording: Record and save every precious moment
• Rearview/Front view switchable: Switch between front view & rearview one moment
• Photograph: Take photos one moment
• Emergency Lock: Lock videos as event files so it won’t be overwritten by loop recording
• GPS Status: Once the GPS signal is received, the GPS icon on the home screen will show OK

Installing a Memory Card

Menu Settings

After powering ON the came10, PAMS the © button to enter the setup procms. Pf the camera is A!IC0ratf’l9 video. prms the @ button to stop A11CCrd’i1″9befans prong the€} button.) l . . l

• Movie Mode： 1296P/1082P/720P
• Movie Clip Time: 1min/2min/3min
• Sound Record: ON/OFF
• LDWS: ON/OFF
• Power Off: Set the automatic shutdown time of the driving recorder.Optional shutdown, 1 minute, 2 minutes，3 minutes
• Clock Settings: Click in to set the current date and time
• Language Settings: Click to select language
• Flicker: Light Source Frequency 50Hz, 60Hz for choosing
• Screen Saver Options: Off, Display Off, Lower brightness, Time and Date
• G-senser sensitivity: Off/High/Middle/Low
• Parking Monitoring: Off/High/Middle/Low
• Time Zone: Insert the GPS cable, start the GPS positioning function, click the button to select the corresponding time zone, andautomatically calibrate the time and date.
• Volumn Setting: Set the volume of the driving recorder
• GPS Information: Click to view GPS signal status
• Speed Unit: km/h or mph
• Over speed remind: Off/ 20 MPH~100 MPH
• Upside down of rear image: ON/OFF
• Show reversing line: ON/OFF
• Rear Cam Mirror Image: ON/OFF
• FW Version: Display your hardware and software information

Functions

Turn ON/OFF the camera
Once connected to the car charger, the camera will auto power on after you start your car, it will auto off Ss after you turn off the car engineif it is recording. It will auto off once unplug it on standby mode.
Note: Please charge the dash cam with included car charger on your car, don’t charge it with other car chargers.
Set Date & Time
Automatically: Connect it with GPS, tum on GPS Auto Time Correction, select your Time Zone, then the dash cam will auto-correct the calibration of the time.
Manually: Press the Menu Setting button, navigate to Date & Time, turnoff GPS Auto Time Correction to set Date & Time; Turn on GPS Auto TimeCorrection to set Time Zone.

Display Mode Then!I am 3 kinds of display modes: Saeen always on, Screensaver with GPS rirannanon, Auto LCD OFF. Please go to Display Mode on 1’1e Menu Setting to switch the screen mode. Default LI ON It> keep the screen always on, Select Screensaver to enable the dashcam autornaflcaly enter saeemaver altar 30 seconds, on this mode, the GPS Information show on 1he saaen. It w!II auto tum off the screen JOs after recording commences If you select OFF.

LDWS
IDWS Lane DeparMe Wamhg S}’fl8m (IDWS) ‘Ml secure your $1lfe1V by sound alarm -when you car 1$ entering Info another lane. P18$$ 1he LOWS bUtton oo lh& Menu to toggl& II ON/OFF.

front -new/Rear ‘View/Reverse AAbtance twitch
The large mrro< d”~play seen can display a single image from one camera, either th6 front view image or the rear image. You can switch the SCAIH! ln between front view and rear view image by ~
button.
Parking Made

Triggered by Collision Detection

After activating the Parking Mode, when the camera turns off, it will turn on and record once the camera detects crash in front, and the videos will be locked in the “Emergency video” Folder.

Time-lapse Recording

After connecting to a WOLFBOX dedicated hardwire kit, and turn the time-lapse recording on, the camera will enter time lapse recording mode automatically. It record 1/2/5(Optinal) frame per second while parking, which extremely save power and card capacity.

Event Recording

Critical event detection is triggered by the G-Sensor (Gravity Sensor) and will auto-detect vehicle impact and cllisions. This will cause the Camera to protect the current video clip from being overwritten by locking it and saving the footage in the “Emergency Video” folder. The vehicle driver can also manually lock the curent video recording session by pressing the Emergency Button/hotkey. The G-Sensor sensitivity is adjustable with 3 settings: Low, Middle, and High. The G-Sensor can also be deactivated in “Menu Setting”> “G-Sensor”

The camera will auto overwrite old Event videos once the Event folder has accumulated 207% of the card capacity. Please regularly save important videos to your PC or another storage location (e.g. external hard drive). To maintain good read/write performance, the MicroSD card should be formatted every 1-2 weeks.

Connecting External GPS Receiver

1. Install the GPS Antenna onto the camera, the GPS Antenna will start to search for a GPS signal.
2. Once the GPS signal has been received, the GPS icon on the home screen will show OK.
3.  To track the GPS Location, Speed, status, GPS Signal Strength, please go to GPS info on the Menu Setting. Latitude:
4. Turn on GPS Direction Display on the Menu Setting, it will show your speed, direction, time and date on the home screen on Screensaver mode. If you turn the GPS direction display off, it won’t show direction.

Playback Video/Photos on the Camera

Press the File button and go to View and Playback videos on the camera.

Video delete/lock

Click the video file that needs to be deleted/locked to enter the next screen

When you click on the icon, it changes the shape of the lock and locks video.

Brightness Adjustment Manual/Auto LCD

brightness adjustable, touch screen and slip to adjust brightness with your fingers

Front Camera Installation

Step 1: Pull out front camera lens, attach upper side of the buckle to the camera

Step 2: Cover the OEM miror, press the bandage to make it closer and attach another side of the buckle.

Step 3: Adjust the angle and done!

Rearview Camera Installation

Step 1: Fix camera with 3M adhesive Find a best location, tear off the 3M adhesive on the rear camera, fix the rear camera near by the car license plate lamp. (lf you need to adjust the angle, please attach the rear camera bracket to the rear Camera and tighten it with screws first)

Step 2: Remove the Panel Remove your trunk’s interior panel to expose the car’s rear wiring chambers. Pop open your trunk and look for a solid interior panel COvering the opposite side of your license plate mounting area. Then, insert a trim removal tool or other thin device behind the panel and pry it off

Step 3: Snake the cable Use a trim removal tool to pop out tailgate trim, then run the cable from the outside of the car into the trunk of your car .

Step 4: Connect the rear camera’s pOwer cable to the extension cable. After snaking your rear camera’s extension cable, connect the power cable to your rear camera’s extension cord.

Step 5: Connecting the red wire with the reverse light wires. Reverse light wires are normally located on the rear side of your car although their placement may vary so be sUre to refer to your car’s manual. Once spoffed, use a pair of pliers or wire stripper fo peel the rubber to expose the live wire. For safety, make Sure you do this while the coar is turned off. Lastly, pleasee poke the red positive bare wire through the positive reverse light wire and then wrap with an electrical tape.

Step 6: Route your rear camera’s power cable to the front of the car. If you’d like, use a trim removal tool to pop out the headlining panel directly above yOur windshield. Then, run your cable through the exposed chamber .

Step 7: Power on the dash cam with box included car charger, don’t charge if with your own chargers.

Step 8: Test the camera to make sure everything works.

Step 9: GPS installation method (Note: GPS module is facing up, placed on the instrument panel).

specifications

The specifications of this product may change without prior notice due to product improvements.

• Lens                            50OMega pixel, 170°wide angle lens
• Display screen             11.66 inch LCD scre display
• Video encoding            H.264 MP4
• TF Card                       support class 10 (8G-128GB)
• Resolution                    1920x1080P
• G-sensor                       built-in 3 axis G-sensor 3 levels of sensitivity
• Audio support               sound recording and loudspeaker
• Front lens aperture        F2.0
• Memory capacity           1G Core dual-coree
• Core                              dual-core
• Language                       multilingual
• Battery                           built-in li battery
• Voltage                           5V
• Function                        streaming media rearview /excellent night vision /reversing parking monitoring /front rear dual-recording /G-sensor / collision boot recording/ video time lapse 17

 Warranty & Support

Warranty

Any quality issues, 1 year warranty

Support

If you have any questions about the product functions or inslattation, please feel free to contact us through amazon or [email protected]. Save’s inquiries will be answered within 6-12 hours of the working day.

Your opinion matters We work hard day and night to improve the quality of our products, services and the user experience. Please feel free to contact our company if you have any valuable suggestions and euipment for product improvement. Expecting your voice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>