WOLFBOX G930 Mirror Dash Cam User Manual

WOLFBOX G930 Mirror Dash Cam

IC warning:
This device contains licence-exempt transmitter(s)/receiver(s)/ that comply with Innovation Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Getting Started

Please read the instructions before operating.

• Please use the original power cable provided in package, do not use other power cables.
• Please check the functionality of dash cam with its all accessories before installation. If you want to find a professional for installation, please check the function first, so as to prevent the inconvenience and installation cost loss caused by the machine problem after the installation.
• Please use original accessories provided in the package, just in case of compatible issues after using others’, especially use 2 or 3 in 1 cigar socket will lead to 100% insufficient current supply.
• Please don’t splice rear camera wire for extension, the monitor may lose the rear image. The length of original cable for rear camera is 20 feet, suitable for most types of cars. We also have 33 feet rear camera extension cables sold separately.
• If the machine cannot be turned on after the power is turned on, please keep the power on and reset the machine. Please CONTACT US if it still doesn’t work.
• How to transfer videos to PC ? Insert memory card via card reader to your PC/MAC to view or download them.We recommend that you use a dedicated video player to watch the video. You can get it free at : https://wolfbox.com/gps-player/

NOTE：

• Do NOT use Windows Media Player . It is NOT made to play 4K videos, hence your video playback will lag.

PACKAGE CONTENTS

Tip: In addition to the original accessories in the package, we also provide the separate hardware kit (for parking monitoring and replacement chargers), rear camera extension cable, and rear camera nounting bracket in the car (which you can use to attach the rear camera installed in the car).If you need these accessories, please feel free to contact us.

OVERVIEW

5

|

GPS port

| Used to connect GPS port(GPS function requires optional GPS antennal)
6| Fasteners| The machine can be fixed with 2 straps

7

| Power button| Short press to wake and turn off the screen, long press to turn on and off the power
8| Display screen| 9.66 inch touch screen display

About the Micro SD Card

When using a new Micro SD card, be sure to format it on the main body.

• Do not remove or insert a Micro SD card while the power is on.
• Use a Micro SD card with Class 10 or higher(8GB-128GB).We have 32GB SD card (Asin: B09Q87X76V) 128GB SD card (Asin: B0B7KWV4CJ) for sale.
• For stable use, it is recommended to format the micro SD card regularly Recommend: Once a month.

NOTE:

• Please format the card in the dash cam, not on PC.
• Formatting will erase all recorded data.

Pay attention to the orientation of the Micro SD card and insert it into the slot (the side with the metal strip faces the back of the dash cam) Make sure that the micro SD card is securely inserted inside the slot.

• Insert until you hear a click. When removing the micro SD card, push in the micro SD card first and then pull it out after the micro SD card pops out a little.

Installation

Please check the functionality of dash cam with its all accessories before installation. When you use the dash cam for the first time, the dash cam comes with factory default settings and you do not need to set it manually.

Rear camera installation

We recommend install the rear camera above the license plate.

1. Fix camera with 3M adhesive Find a best location tear off the 3M adhesive on the rear camera, fix therear camera near by the car license plate lamp. (if you need to adjust the angle, please attach the rear camera bracket to the rear camera and tighten it with screws first).
2. Remove the Panel Remove the inner panel of the trunk to expose the rear wiring compartment of the car. Open the trunk and look for a sturdy inner panel covering the other side of the license plate installation area. Then, insert a decorative removal tool or another thin device behind the panel and pry it apart.
3. Install the cable Look for lights near the license plate that have gaps to allow wires to pass through. Run the rear camera cable through the gap into the trunk of your car.
4. Connect the rear cameras power cable to the extension cable. After snaking your rear camera’s extension cable, connect the power cable to your rear camera’s extension cord.
   • If your car has its own reversing assist system, please ignore the red wire on the rear camera cable.
5. Route your rear camera’s power cable to the front of the car. If you’d like, use a trim removal tool to pop out the headlining panel directly above your windshield. Then, run your cable through the exposure chamber.
6. Power on the dash cam with box included car charger, don’t charge it with your own chargers.

NOTE:

• We do not recommend to install the rear camera inside the car, it will make the effect of the rear camera worse. If you need to install the rear camera in the car, please purchase a in-car rear camera (Asin: B09Q84NBFN), or contact us to get it.
• If your car is a RV or a pickup truck, you can install the rear camera forward (the bracket is below), and turn on the “Upside down of rear image” and turn off the “mirror flip of rear image” to adjust the image.
• If you need a license plate bracket, we also provide this accessory (Asin: B0B91ZTXTJ), you can search by yourself or CONTACT US.
• Glare due to high beams is unavoidable. We have an upgraded WDR rear camera (Asin: B09KRM9QQ5) that can effectively improve this problem.
• About the WDR rear camera: it has the function of automatically adjusting the brightness. So it will look darker than the front camera when shooting during the day. This is normal and not caused by a camera defect. Also it automatically brightens at night and can reduce the impact of rear vehicle lights. As shown below:
• Day time (The rear camera is a little darker than the front camera).
• Night vision (The rear camera is brighter and clearer than the front camera).

How to install the mirror dash cam

1.  Attach the upper end of the straps to the retaining hooks on the top of the rear-view mirror.
2. Extend the straps around the back of the rear-view mirror and attach them to the bottom retaining hooks.
3. Route your rear camera’s power cable to the front of the car.If you’d like,use a trim removal tool to pop out the headlining panel directly above your windshield.Then,run you cable through the exposed chamber.
4. Power on the dash cam with box included car charger,don’t charge it with your own chargers.
5. Test the camera to make sure everything works.
6. Installation method (Note: GPS module is facing up, placed on the instrument panel).

CAUTION:

• Connect the cigar plug cord connector in the correct orientation. Connecting in the wrong direction may cause malfunction or damage. If you cannot connect successfully, check the connection part carefully before connecting.

Q: Why is the front lens picture so dark?
A: Please check if your front camera is facing the sky. If the lens is facing the sky, it will automatically reduce the light reception, causing the screen to darken.

How to install the GPS

1. GPS front and back
2. Installation location
   Considering the use effect and installation convenience, we usually recommend customers to install it at position 1. Of course, you can also try to install it in other locations for testing, and choose the location you think is most suitable.

GPS Working

Q: Why is my GPS not working? /How to use GPS ?
A: If you cannot receive the signal after inserting the GPS, please follow the steps below.

1. The vehicle must be within a large area.
2. Insert the GPS plug again.
3. Place the GPS plug upward.
4. Restart
5. It will be recognized after about 40 seconds.

If still cannot receive the signal, it may be a GPS problem. Please CONTACT US and we will help you solve this problem.

Date&Time Setting

TimeZone Setting

After plugging in the GPS, you have to go to the settings to change the time zone manually.

Time Zones – GMT (Greenwich Mean Time) Values

If you need a special time zone or need any help, please CONTACT US.

With GPS connected:

• Slide up and down the blank area on the screen to adjust the angle of view.
• Blank area on the screen: Swipe the screen left or right to switch between front view, rear view, or split-screen view.

NOTE：

• Ensure that the rear camera is connected

Power ON/OFF

• If you turn on the engine (ACC on) while the cigar power adapter is connected, the power will be turned on automatically and the opening screen will be displayed.
• Press and hold the power button to turn off the power during startup, and then briefly press the power button again to turn on the power of the unit and display the opening screen.
• Briefly press the power button to turn off the screen.

Menu Settings

• After powering ON the camera, press the SEATTING button to enter the setup process.

Gsensor detects the impact and performs a 1 minute fixed time video recording. Emergency video recording time is the total video file before + emergency video file length of 1 minute.

When a car crashes at 28 seconds, the normal recording time is 28 seconds, then the G-sensor detects the crash from the 28th second and the emergency recording time is 60 seconds.

NOTE：
The G sensor detects the impact above the set value, and the LED light starts to turn yellow and go off, which is recorded as an “Emergency Video”.

NOTE:
We will continue to update the firmware based on customer feedback.

About Hardwire Kit

The Parking Mode function requires a G930 hardwire kit activate. If you need this function, please connect the hardwire kit. (CONTACT US to get G930 hardwire kit).

When G930 Hardwire Kit is not connected

When you clik into there will be the following options :

Parking Mode: OFF/12H/24H
(Set the continuous shootingduration of the time-lapse video *Up to 24 hours)

Playback Mode

When you turn on the power, the dash cam will start recording automatically. Click to enter the playback mode.

1. Playback menu
2. Emergency Recording
3. Normal Album
4. Urgent Album
5. Photo
6. Switching front and rear shots

CAUTION:

• The front-view video and the rear-view video are displayed in different file lists.
• You need to click to switch between the front-view video list and the rear-view video list.

Play on Computer

Correct Video Player to Play 4K Videos We recommend GPS Media player which can view google maps. You can get it free. Mac/Win Version Download：https://wolfbox.com/gps-player/

CAUTION:

• If you encounter problems during use please CONTACT US.

Trouble Shootings

Please feel free to contact our customer support at [email protected]. Most emails are typically replied within 10 hours. However, all questions are answered within 24 Hours.

Why rear camera cannot be detected?

1. Please confirm whether the rear cable is installed correctly, pay attention to whether the 4pin connection position is loose and whether the position of the host and the rear camera mouth is loose. Please try to reconnect.
2. If still not work after reconnection, there may be a problem with the cable. Because when wiring in the car, it may cause the metal wire in the rubber to bend and cause a short circuit. Please CONTACT US and we will solve it for you.

Why can’t it automatically switch to the rear camera when reversing or why can’t the reversing line appear

1. Check if the 4pin is loose, and if the rear camera port of the dash cam is loose.
2. Check whether the red wire of the rear camera cable is connected to the positive pole of the reverse light, please do not connect it to the brake light or other.
3. If the connection is correct, please use a tester to measure whether the voltage is output from the reversing light when in reverse gear.

Card Error
G930 records in UHD 4K image quality, with a large amount of data transmission. We recommend you to buy the SD card we sell, 32GB SD card (Asin: B09Q87X76V) 128GB SD card (Asin: B0B7KWV4CJ). Make sure the card is insert correctly, restart the machine. Please CONTACT US if you still have card problems.

Video is fuzzy
Please make sure the lens of the camera is clean and there is no dirt or grease on the windshield also. If the lens is out of focus, we are extremely sorry in advance. This can be a manufacturing defect. Please send us an email with a screenshot or a sample video so we can get this resolved for you ASAP.

Camera turns ON/ OFF frequently automatically
Your WOLFBOX Dash Cam has Loop Cycle Recording. When it is set to either 1, 3 or 5 -mins, it will delete oldest files and record newer files over and over when the memory card is full.

Camera Locks many videos automatically.
Please change your G-Sensor Setting to lower setting. This setting depends on type of car or truck you are driving and how much vibration your car/truck is creating based on suspensions and road condition.

My Video playback on PC is lagging.
Make sure you have use the dedicated GPS Player. You are viewing high-bit rate version of video files. Slower PC may have problem with faster data processing. Please record videos at lower resolution and try again. Contact us if problem still persists.

GPS can not be received
It may be difficult to receive GPS signals in tunnels or in valleys of buildings, and also difficult to receive GPS signal immediately after starting this unit Please check again after a while. Please CONTACT US if you still have problems.

ONE-YEAR LIMITED WARRANTY

We are committed to giving customers the best product experience and after- sales service. We would like to provide One full year of limited warranty for your product from the date of purchase to be free from defects in materials and craftsmanship.
Please CONTACT US with your online order, and we will provide free replacement and lifetime technical support. Besides, you can also get free accessories from us.

Product Specifications

Item Name| 9.66″ Stream Mledia Dash Camera| Display Resolution| Front 38402160 Rear 19201080
---|---|---|---
Model| WOLFBOX G930| The Speaker| 1W 8R
NAND Flash| SPI NOR FLASH 16Mbit| MIC| 4015
Display/Touch Screen| 9.66 Inch

Features

Software Support

Language Support| Multilingual Translation| Rear Camera Video Quality| 1920x1080P
---|---|---|---
G-Sensor| Yes| Photo Resolution| 8M (Max)
Loop Video| Yes| Working Voltage| 5 (V)
Recording Function| Yes| The Minimum Power Consumption| 200uA
Front Camera Video Quality| 3840x2160P / 2560x1440P / 1920x1080P

Check us out here! We have professional customer service!

• E-mail: [email protected]
• Phone: +1 888 296 8399

References

• WOLFBOX Player

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>