WOLFBOX G840H 12 Inch 2.5k Mirror Dash Cam With Full Touch Screen User Manual

: June 5, 2024
: WOLFBOX

WOLFBOX G840H 12 Inch 2.5k Mirror Dash Cam With Full Touch Screen User

Manual

Notice :

To avoid product loss caused by improper operation, please read the safety information of all operation instructions in this manual before using thisproduct.

1.Port description

NO.	Name	Overview
1	lens	Front lens, record the front image of the car
2	Rear lens connector	Port used to connect the rear lens

3

| GPS connector| Used to connect GPS port

(GPS function requires optional GPS antenna)

4| TF card slot| Provide extensible storage(class10 Max 64GB)

5

| Power connector| Port for charging
6| Fasteners| The machine can be fixed with silicone straps

7

| Display screen| 11.66 inch touch screen display
8| Power button| ****

2. SD card selection and installation

The data of SD card should be read and written repeatedly during the use of dashcam,the type of SD card is class 10.In order to work more stably and extend the service life of dashcam,we suggest formatting SD card per month on PC and change a new SD card per year.

SD card insertion

When SD card is inserted, make sure the dashcam is powered off.

3.Screen icon description

4.The function of the screen shortcuts

While recording ,swiping the screen up and down adjusts the Angle of view.
While recording ,sliding the screen left and right to switch front and back camera
While recording ,slide the area inside the red frame up or down to adjust the screen brightness
While recording ,Double-click the screen to capture the current video

5. Function set

5.1 Function interface

press the pause button on the screen to pause recording,then press the setting button to enter the menu.

Storage space: click to view the storage condition and format SD card
Recording resolution : 1440P/1080P/720P optional
Video time : The video will be archived at a set time of 1 minute/3 minutes /Sminutes
Sound recording :on/off optional
G-sensor : Optional Off / High / Medium / Low
Parking monitoring mode: turn on the parking monitoring mode after entering, and the monitoring sensitivity and time-lapse video can be adjusted
Display mode: optional screen On / Off
Screen brightness: Low, medium and high are optional
Volume: Optional on, Low, Medium, High
Time and date: after entering, you can set the GPS automatic setting time, 24-hour system, time zone, or you can set the date and time manually (GPS function requires optional GPS antenna) • Language: select screen display language
GPS information: click to view GPS information
Reversing aid line: optional On/Off
Factory Settings: click to set factory restore Settings
About the machine: enter to view the machine information

5.2 Video playback interface

Click the enter icon, pause the video and click the history file icon to enter the playback interface.

NO.	Overview
1	Video icon, click the icon to display the video file thumbnail
2	the locked video file
3	Image icon, click the icon to display the image file thumbnail
4	Edit the icon, click the icon to edit the file
5	File date, click to select the date you want to view the file
6	Front camera file
7	Rear camera files

6. Parameter detail

Vehicle trajectory/Touch screen

7. Installation introduction

7.1 Host installation method

Step!: Fix the silicone button in the host on both sides of the fixed parts

Step2: Buckle the product in the rearview mirror by silicone button

Step 3: Adjust the front lens to the right position

7.2 Rear lens installation method

Step 1: Secure the rear camera with 3M adhesive

Find the best position, tear off the 3M adhesive on the rear camera and install the rear camera near the license plate lamp.(lf you need to adjust
the Angle, install the rear camera bracket on the rear camera and tighten it with screws first.)

Step 2: Remove the panel

Remove the inside panel of the trunk to expose the car’s rear wiring room.Pop up your trunk and look for a solid interior panel that covers the other side of the license plate mount area.Then, insert a trim removal tool
or other thin device behind the panel and pry it open.

Step 3: Hide the line

Use the trim strip removal tool to pop up the tailgate t rim strip,then the cable is inserted from the outside into the trunk of the car

Step 4: Connect the rear lens power cord to the extension cord

Connect the power cord to the rear camera extension cord after plugging in the rear camera extension cord.

Step 5: Connect the red line with Reversing control line

Reversing control lines are usually located at the rear of the car, although their position may vary, so be sure to refer to the car’s manual.Use pliers or
a wire stripper to strip the rubber and expose live wires.

Step 6: Wire the power cord of the rear camera to the front of the car If desired, use the trim tool to pop the windshield panel directly above the
windshield.Then, pass the cable through the exposed chamber.

Step 7: Connect the car charger to the charger adapter to supply power for thedashcam

Step 8: Ignite the car and light the dashcam

8.Abnormal handling

Try restarting the machine if some functions do not work properly or if you have changed the Settings

Reminder low battery/set not to save/the ignition shuts down

automatically?

Remove the memory card, connect the machine to the power source and charge it for 4 hours.
Contact the merchant to replace the built-in battery

Memory card is full?

Format the memory card test.
Adjust the “G-sensor” inside the machine to low , formatting the memory card per mont
, Change a new memory card.

Please insert SD card/SD card not recognized?
The memory card is damaged/Card speed low/Memory CARDS are not compatible/no card /Please replace the original high speed TF card.

G-sensor : Optional Off / High / Medium / Low
Parking monitoring mode: turn on the parking monitoring mode after entering, and the monitoring sensitivity and time-lapse video can be adjusted
Display mode: optional screen On / Off
Screen brightness: Low, medium and high are optional
Volume: Optional on, Low, Medium, High
Time and date: after entering, you can set the GPS automatic setting time, 24-hour system, time zone, or you can set the date and time manually (GPS function requires optional GPS antenna)
Language: select screen display language
GPS information: click to view GPS information
Reversing aid line: optional On/Off
Factory Settings: click to set factory restore Settings
About the machine: enter to view the machine information

9. Warranty & Support

Warranty
Any quality issues, 1 year warranty.
Support
If you have any questions about the product functions or installation, please feel free to contact us through amazon or service. wolfbox@gmail.com. Save’s inquiries will be answered within

6-12 hours of the working day.

Your opinion matters
We work hard day and night to improve the quality of our products, services and the user experience. Please feel free to contact our company if you have any valuable suggestions and equipment for product
improvement. Expecting your voice.
For more info：WOLFBOX
Email: contact@wolfbox.com
Website: www.wolfbox.com