BLAUPUNKT 5IX60290 Stand-alone hob, combi induction integrated extractor fan Instruction Manual

: June 3, 2024
: Blaupunkt

Table of Contents

Instruction manual
5IX60290
- Stand-alone hob, induction
SAFETY
DESCRIPTION OF THE APPLIANCE
- TECHNICAL CHARACTERISTICS
- OPERATING PANEL
OPERATING THE HOB
- DISPLAY
- VENTILATION
STARTING UP THE HOB
COOKING RECOMMENDATIONS
OPERATING THE HOOD (NOT FOR 5IZ34291)
MAINTENANCE AND CLEANING OF THE HOB
CLEANING AND MAINTENANCE
- WHAT TO DO IF…
ENVIRONMENTAL PROTECTION
INSTALLATION INSTRUCTIONS
- How to stick the gasket:
- Fitting – installing
ELECTRICAL CONNECTION
- Service
- Documents / Resources
References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Instruction manual

BLAUPUNKT 5IX60290 - YourBlaupunkt Register your new device on YourBlaupunkt: blaupunkt-einbaugeraete.com

5IX60290

5IX80290

Enjoy it.

Stand-alone hob, induction

SAFETY

PRECAUTIONS BEFORE START-UP

Remove all parts of the packaging.
The appliance may only be installed and connected by a qualified electrician. The manufacturer cannot be held responsible for damage caused by errors in installation or connection. Only use the appliance when it is installed.
The appliance may only be used when it is erected and installed in a piece of furniture and a confirmed and adjusted work plan is used.
This appliance may only be used for the household cooking and frying of food and is not intended for commercial purposes.
Remove all labels and stickers from the glass. The appliance may not be modified.
Do not use the hob as a work surface or storage area.
Safety is only guaranteed if the appliance is connected to a protective conductor that complies with the applicable regulations.
The appliance may not be connected to the power supply via an extension cable.
The appliance may not be used over a dishwasher or tumble dryer: the water vapours released could damage the electronics.
Do not switch on the appliance using an external timer or a separate remote control.
CAUTION: The cooking process must be monitored. A short-term cooking process must be constantly monitored.

GENERAL SAFETY INSTRUCTIONS

Switch off the cooking zones after each use.
Overheated fats and oils ignite quickly. If you prepare dishes in fat or oil (e.g. chips), you should observe the cooking process.
When you cook and fry, the cooking zones become hot. For this reason, protect yourself from burns while and after using the appliance.
Ensure that no electrical cable from a freestanding or built-in appliance comes into contact with the panel or the hot cooking zone.
Magnetic objects such as credit cards, diskettes, pocket calculators, etc. must not be in the immediate vicinity of the appliance when it is switched on. Their function could be impaired.
Metal objects such as knives, forks, spoons and pot lids should not be placed on the hob as they could become hot.
In general, do not place any metal objects (e.g. spoons, pot lids, etc.) on the induction surface, as they may heat up during operation.
Never cover the cooking surface with a cloth or protective foil; these could become very hot and catch fire.
This appliance can be used by children from the age of 8 years and above and persons with reduced physical, sensory or mental abilities or a lack of experience and knowledge if they are supervised or if they are instructed in the safe use of the appliance and understand the resulting hazards.
Children may not play with the appliance.
Cleaning and user maintenance may not be carried out by children without supervision.

PROTECTION AGAINST DAMAGE

Do not use any pots or pans with unpolished or damaged bases (e.g. made of cast iron). These can scratch the glass ceramic panels.
Note that grains of sand can also cause scratches.
Glass ceramic is insensitive to temperature shocks and very resistant, but it is not unbreakable.
Especially pointed and hard objects that fall onto the cooking surface can damage them.
Do not knock pots and edges against the panel.
Do not use the cooking zones with empty cookware.
Avoid placing sugar, plastic or aluminium foil on the hot cooking zones. These materials melt, stick firmly and can therefore lead to cracks, fractures or other permanent changes in the panel when cooling down. If they still get onto the hot cooking zones, please switch off the appliance and remove these substances while they are still hot. As the cooking zones are hot, there is a risk of burns.
Do not place any objects on the cooking zone.
Never place hot cookware on the control unit. The electronics under the glass could be damaged.
If there is a drawer under the built-in appliance, make sure there is a minimum distance of 2 cm between the underside of the appliance and the contents of the drawer, otherwise the ventilation of the appliance is not guaranteed.
No flammable objects (e. g. aerosol cans) may be stored in this drawer. Any cutlery trays in the drawer must be made of heat-resistant material.
Do not heat closed containers (e. g. tins) on the cooking zones. The containers or tins can burst due to the resulting excess pressure, resulting in a risk of injury!

PRECAUTIONS IN CASE OF APPLIANCE FAILURE

If an error is detected, the appliance must be switched off and disconnected from the mains.
If breaks, fissures or cracks occur on the glass: Immediately switch off the hob, unscrew or remove the hob fuse, and contact our customer service or your specialist retailer.
Repairs to the appliance may only be carried out by qualified personnel.

WARNING: If the glass surface is cracked, switch off the appliance to avoid the risk of electric shock.

PROTECTION AGAINST OTHER HAZARDS

Make sure that the cookware is always centred on the cooking zone. The base of the pan must cover as much of the cooking zone as possible.
For persons with a pacemaker: an electromagnetic field is generated near the appliance when it is switched on, which could possibly affect the pacemaker. In case of doubt, please contact the manufacturer of the pacemaker or your doctor.
Do not use cookware made of aluminum or plastic: it could melt on the hot cooking zones.
NEVER try to extinguish a fire with water. Switch the device off and then cover the flame, e. g. with a lid or a fire blanket.

WARNING

The use of pots of poor quality or of an adapter disc for induction will lead to a premature termination of the warranty. The manufacturer accepts no liability for damage that may occur on or near the hob.

DESCRIPTION OF THE APPLIANCE

TECHNICAL CHARACTERISTICS

Type|

5IX80290

|

5IX60290

---|---|---
Total power|

7.400 W

|

7.400 W

Energy consumption for the hob EChob**|

180.4 Wh/kg

|

162.3 Wh/kg

| |
Front left heating zone|

210×190 mm

|

Ø 160 mm

Minimum detection|

Ø 110 mm

|

Ø 90 mm

Nominal power*|

2.100 W

|

1.400 W

Booster power*|

3.000 W

|

1.850 W

Standardised cookware category**|

B

|

A

Energy consumption ECcw**|

188 Wh/kg

|

170.9 Wh/kg

| |
Rear left heating zone|

210×190 mm

|

Ø 175 mm

Minimum detection|

Ø 110 mm

|

Ø 90 mm

Nominal power*|

2.100 W

|

1.400 W

Booster power*|

3.000 W

|

2.100 W

Standardised cookware category**|

B

|

C

Energy consumption ECcw**|

188 Wh/kg

|

145 Wh/kg

| |
Rear right heating zone|

210×190 mm

|

Ø 160 mm

Minimum detection|

Ø 110 mm

|

Ø 90 mm

Nominal power*|

2.300 W

|

1.400 W

Booster power*|

3.000 W

|

1.850 W

Standardised cookware category**|

C

|

A

Energy consumption ECcw**|

159.5 Wh/kg

|

170.9 Wh/kg

| |
Front right heating zone|

210×190 mm

|

Ø 175 mm

Minimum detection|

Ø 110 mm

|

Ø 90 mm

Nominal power*|

1.400 W

|

1.400 W

Booster power*|

3.000 W

|

2.100 W

Standardised cookware category**|

A

|

B

Energy consumption ECcw**|

186.4 Wh/kg

|

162.7 Wh/kg

The given power may change according to the dimensions and material of the pan.
**Calculated according to the method of measuring performance (EN 60350-2).

OPERATING PANEL

5IX60290 - OPERATING PANEL

Pause function
Grill function
Chef key
Keep warm function
Timer function [+/-]
Timer Selection button
Power Selection button
Hood Selection key
Timer
On/Off
Smart Slider

OPERATING THE HOB

DISPLAY

Display Name Description
0 Zero The hub is activated
1… 9 Power level The power setting
U No pot detection Pot not in place or not suitable
A Automatic preheating Maximum power + preheating
E Error display Electronics error
H Residual heat Hob is hot
P Booster Booster power is activated
U Keep warm function With this function, food is kept warm at 70°C.
II Pause The hob is on pause
∏ Bridge Two cooking zones can be combined into one cooking zone
GRILL Grill function The grill function is activated

Hood – Manual operation Ventilation takes place in manual mode

VENTILATION

The fan works automatically. It starts at low speed as soon as the values released by the electronics exceed a certain threshold. The higher speed is activated when the induction hob is used intensively. The fan reduces ist speed and switches off automatically as soon as the electronics have cooled down sufficiently.

STARTING UP THE HOB

BEFORE FIRST USE

First clean your appliance with a damp cloth and then rub it dry with a clean cloth. Do not use any cleaning agent, which could cause a bluish tint on the glazed surface.

INDUCTION PRINCIPLE

Under each cooking zone is an induction coil. When the cooking zone is switched on, the induction coil generates a variable electromagnetic field. The magnetic field generates inductive currents in the base of the pot, which must be magnetic. As a result, the base of the pot, which is located on the heating zone, heats up. The cooking zone heats up only indirectly through the heat emitted by the pot.

Induction cooking zones only work with magnetic cookware:

Suitable induction cookware with a magnetic base such as: cast iron, steel, enamelled steel, stainless steel with a magnetic base.
Unsuitable induction cookware: copper, aluminium, glass, wood, earthenware, ceramic, nonmagnetic stainless steel.

The induction cooking zone is automatically adjusted to the size of the cookware. The cookware must not fall below a certain base diameter, otherwise the induction will not activate. Each pot base diameter must have a minimum size depending on the size of the cooking zone.

If the cookware is not suitable for induction, the [ U ] display will appear.

TOUCH CONTROL FUNCTION

The hob is controlled by sensor buttons. These react to gentle touches of the glass with the finger. If you touch the buttons for about one second, the control commands are executed. Each reaction of the control buttons is acknowledged with an acoustic and/or visual signal.

For general use, only press one button at a time.

SMART SLIDER FUNCTION

To select the power level using the SMART SLIDER, move your finger on the SLIDER ZONE. The desired performance can also be selected directly by touching the respective level.

Smart Slider
Direct access

SWITCHING THE HOB ON/OFF

First switch on the hob and then the cooking zone.

Hob: switch on/switch off:

Operation| Operating panel| Display
Switch on| Press [ ] for 2 sec.| Press [ 0 ]
Switch off| Press [ ] for 2 sec.| None or [ H ]
Switch cooking zone on/off:

If no further input is made, the hob will switch off after approx. 20 seconds for safety reasons.

POT DETECTION

For greater comfort and simplicity, this hob is equipped with a control system.
Switch on the hob and place a pot on the hob. The intuitive operation will automatically detect the pot or will display the [ 0 ] symbol above the Smart Slider to be used. You can now adjust the cooking level as desired. The pot detection feature ensures complete safety.

The induction system will not work:

If there is no cookware on the cooking zone or if a pot unsuitable for induction is used. In this event, the power level cannot be increased and the [ U ] symbol will appear on the display. The [ U ] will disappear when a pot is placed on the cooking zone.
If the pot is removed from the cooking zone during cooking, the cooking zone will immediately switch off and the [ U ] sign will appear in the display. The [ U ] will disappear when a pot is placed back on the cooking zone. The cooking zone then resumes at the previously set power level.

After use, switch off the cooking zone so that the [ U ] symbol no longer appears in the display.

RESIDUAL HEAT DISPLAY

After the cooking zones or hob have been switched off, the residual heat of the cooking zones that are still hot is displayed with an [ H ]. The [ H ] will disappear if the cooking zones can be touched safely. As long as the residual heat display is lit, the cooking zones should not be touched and no heat-sensitive objects should be placed on them: Risk of burns!

BOOSTER FUNCTION (POWER LEVEL)

All cooking zones are equipped with a booster function, i.e. with power amplification. The booster function is displayed with [ P ]. If they are switched on, these cooking zones operate for a period of 10 minutes. This high power is intended to enable you to do things like quickly heating large quantities of water, to boil water for pasta for example. After the appliance has automatically switched back after 10 minutes, you should not switch back to the booster. The appliance could overheat and will trigger a safety shutdown.

Switching booster on/off:

Management of the maximum power:

The hob is equipped with a maximum power level. To ensure that this maximum power is not exceeded, the electronics automatically reduce the cooking level of another cooking zone when the booster function is activated. This cooking zone will then display the reduced power [ 9 ] by flashing.
Selected cooking zone| Other cooking zone (e.g.: Power level 9)
[ P ] lights up| [ 9 ] is reduced to [ 6 ] or [ 8 ] and flashes

TIMER

With the integrated timer, a cooking time of 1 to 999 minutes can be set on all four cooking zones. Each cooking zone can have a different setting.

Activating or changing the duration:

After a few seconds, the flashing will stop. The duration is activated and the time lapse begins.

Switching off the timer:

If several timers are running, please repeat the procedure.

Timer as egg timer:

After a few seconds, the flashing will stop. The duration is activated and the time lapse begins.

Automatic switch off:

When the programmed cooking time has elapsed, [ 000 ] will flash and an acoustic signal will be given.
To switch off the signal tone and flashing, simply press the [ – ] or [ + ] button.

AUTOMATIC PREHEATING

All cooking zones are equipped with automatic preheating. When the automatic preheating system is activated, the cooking zone automatically heats up at maximum power and then switches back to the cooking level you have selected. The preheating time depends on the selected continuous cooking level.

Activating the automatic preheating feature:

Operation| Operating panel| Display
Select power (e. g. « 7 »)| Slide your finger over the Smart Slider and remain for 3s| [ 7 ] flashes with [ A ]
| Set continuous cooking level| Automatic preheating Time (min:sec)|
1| 0:40
2| 1:12
3| 2:00
4| 2:56
5| 4:16
6| 7:12
7| 2:00
8| 3:12
9| – : –

Switching off the automatic preheating feature:

Operation| Operating panel| Display
Select power| Slide your finger over the Smart Slider| [ 0 ] to [ 9 ]

STOP & GO FUNCTION

With this feature, you can temporarily interrupt the cooking process and restart with the same settings.

Switching Stop & Go function on/off:

MEMORY FUNCTION

After switching off the hob, the last settings remain stored. You can reactivate these values using the memory function. The following settings can be reactivated using the memory function:

Power levels of the cooking zones.
Timer settings of the cooking zones.

Settings of the automatic preheating function Calling up the memory function:

Switch on hob (Press [] for 2 sec.)
Press [ II ] within 6 seconds.
The values of the last settings are reactivated.

KEEP WARM FUNCTION

With this function, food is kept warm at 70 °C. This function prevents overflow and burning.

Switching on and off:

AUTOMATIC BRIDGE AND BRIDGE FUNCTION

(ONLY FOR 5IX80290)

This function allows two cooking zones to be linked together for a single cooking process.

Process	Operating panel	Display
Switch on the hob	Press [ ] for 2 sec.	[ 0 ]
Switch on bridge	Place a pot on one of the two cooking zones to be bridged
and press the corresponding selection buttons	[ 0 ] and [ ]
or place a large pan on both of the zones you wish to use with this
function	[ ] will flash [ ]
Increase power	Slide to the right over the Smart Slider that shows the power

[ 1 ] to [ P ]
Switch off bridge| Press the two desired zones| [ 0 ]

CHILD LOCK/LOCKING THE HOB

To prevent the cooking zone setting from being altered, e.g. when cleaning the glass, the Glase, operating buttons (except the [] button) can be locked.

Activating the lock:

Operation| Operating panel| Display
Switch on the hob| Press [ ] for 2 sec.| [ 0 ]
Switch on lock| Hold the button of a cooking zone for 3s. Then place your finger on the Smart Slider and slide your finger from left to right| Light on
Switch off lock| Hold the button of a cooking zone for 3s. Then place your finger on the Smart Slider and slide your finger from right to left| Light off

“Chef” function (only for 5IX80290)
This function changes the hob in 2 big zones.

Start up/stop the chef function:

GRILL FUNCTION/CHEF FUNCTION

(ONLY FOR 5IX80290)

This function allows optimum use of the Blaupunkt griddle / Teppan Yaki plate.
By bridging two cooking zones and using a suitable power level, this feature guarantees a pure indoor grilling pleasure. You can find the right accessories in our online shop at www.blaupunkt-einbaugeraete.com or from your specialist retailer.

Switching the grill function on/off:

Operating time limit:

The hob has an automatic operating time limit. The continuous operating time of each cooking zone depends on the selected cooking level. A precondition is that no setting changes are made to the cooking zone during the period of use. The cooking zone is switched off once the operating time limit has responded.

Set cooking level

| Operating time limit (hours:min)
1|