ZIEGER 10008347 Crash Bar Kit Instruction Manual
- June 8, 2024
- ZIEGER
Table of Contents
10008347 Crash Bar Kit
Mounting Instruction
10008347 Crash Bar Kit
| RAL Farbton: | Artikelnummer: |
|---|---|
| Color: | Item No.: |
9005
(jet black)| 10008347
9006
(white aluminium)| 10008348
Rev.: Ausgabedatum:
Date of issue:
./. 09.06.2021
Crashbar kit
max. load
k.E. kg (n.R. lbs)
max. speed
k.E. km/h (n.R. mp/h)
Attention
**** For your own safty we recommend having installation and/ or servicing
carried out by a specialist workshop. We assumes no liability for damage
caused by improper installation and/ or maintenance work.
No torque specifications: Use the torque defined by vehicle manufacturer! The
standard torque in this table can be used as long as it is within the vehicle
manufacturer´s specifications.
Thank you for choosing this quality product from IBEX!
The assembly and/or maintenance of this product requires a good technical understanding. For your own safety, we recommend that the assembly and/or maintenance is carried out by a specialist workshop. Our company assumes no liability for any damage caused by improper assembly or maintenance. Be sure to keep in mind all the notes provided in the assembly instructions. Please also note all the instructions relevant to the assembly in the vehicle manual. Nonobservance can cause damage to the vehicle or danger to the driver! Please keep the assembly instructions as a reference.
General Notes:
Observe any country-specific regulations by the legislature or homologation
regulations.
Preparation:
Read the assembly instructions carefully and make sure all parts of the list
are available. Make sure that your vehicle stands safely and can´t fall over.
Turn off the engine and pull the ignition key. If necessary, allow the
engine/exhaust to cool down. When working on the electrics disconnect the
vehicle battery. Be sure to use only suitable tools. If necessary get help
with the assembly work by a second person.
Assembling:
According to vehicle manufacturers specification all demounted parts and
connections must be reassembled or replaced by the parts and connections
supplied by our company. If not stated different secure all threads with a
medium-strong liquid screw protection. If not stated different by the vehicle
manufacturer or our company, all bolts and nuts must be tightened according to
A4/ISO. After assembly, make sure that all previously demounted parts and
connections have been properly remounted.
Funktion Check:
After assembly, pay attention to the absolute freedom of movement and proper
function of all vehicle parts. Cables, trains and hoses must not scrub or be
clamped. Do a comprehensive functional check before the start of your journey.
After 100 km please check the proper tightness of all parts and connections
demounted during assembly.
Legende: (legend)
| | |
---|---|---|---
Ansicht von links in Fahrtrichtung (left side)| Ansicht von rechts in
Fahrtrichtung (right side)| Positionsnummer & Anzugsmoment
(position number and torque)| Schraubensicherung verwenden
(use screw lock)
(Pos.No.)| (drawing number)| (description)| (quantity)|
[Nm]| (special features)
---|---|---|---|---|---
1| 2091_1_21| crashbar compl.| 1| |
2| 2091_2_22| crashbar compl.| 1| |
3| 2091020| mounting kit| 1| |
3.1| SR1530| stopper| | |
3.2| DIN 913 -M8 x 8| pin screw| 2| 19|
3.3| 2091_0_15| bracket| 1| |
3.4| DIN ISO 912 – M8 x 16| hexagon socket screw| 2| 23|
3.5| DIN 125 – A 8.4| washer| 2| |
3.6| DIN ISO 912 M12x1.25 x 150| hexagon socket screw| 1| 80| Metrisches
Feingewinde
3.7| DIN 6921 – M8 x 20| hexagon screw w. flange| 2| 23|
3.8| DIN ISO 912 MI 0x1.25 x 55| hexagon socket screw| 2| 46| Metrisches
Feingewinde
3.9| 1470_0_12| spacer| | |
3.10| DIN ISO 7380 F – m5 x 16 VA| VA Hexagon socket scew| 1| | 10.9
3.11| DIN ISO 912 M12x1.25 x 140| hexagon socket screw| | 80| Metrisches
Feingewinde
Copyright by:
IBEX GmbH Sosaer Straße 35 01257 Dresden
Errors and changes expected. Subject to technical and design changes.
Datum der Konfektionierung: (packaging date)
Email: info@ibex-parts.de
Tel.: 0351/ 27278100
Fax: 0351/ 27278101