Virtual Fly V3RNIO Flight Sim TPM Module User Manual
- June 3, 2024
- Virtual Fly
Table of Contents
Virtual Fly V3RNIO Flight Sim TPM Module
IN THE BOX
- A) V3RNIO / V3RNIO+
- B) Clamp
- C) Allen Screws
- D) Allen Key
- E) USB-B to USB Cable
HARDWARE SETUP
Using the V3RNIO/V3RNIO+ on a desk
Use the four screws (C) to attach the clamp (B) to the V3RNIO/V3RNIO+ as seen
in the picture. Now you can secure the device to the desk.
Finally, connect the USB-B to USB cable (E) between
the V3RNIO/V3RNIO+ and the computer where the flight simulation software is
running.
Using the V3RNIO/V3RNIO+ in a flight panel
To attach the V3RNIO/V3RNIO+ to your custom flight panel, unscrew the six
front screws to remove the cover. Now, you can mount the V3RNIO into a fitting
socket. Find the exact measures in PDF and DXF format at https://www.virtual-
fly.com/downloads
Finally, connect the USB-B to USB cable (E) between the V3RNIO/V3RNIO+ and the
computer where the flight simulation software is running.
Chaning the V3RNIO levers’ hardness
V3RNIO levers move forward and backward precisely. Tightening the screw under
each lever adjusts its hardness.
Chaning the V3RNIO+ levers’ hardness
The THROTTLE lever from the V3RNIO+ moves forward and backward, and you can
adjust the hardness by rotating the adjustment wheel, as seen in the picture.
The PROP and MIXTURE levers can be adjusted precisely, rotating each handle,
as seen in the picture. If you want to move them quickly forward or backward,
you can do so while pressing the front button.
SOFTWARE SETUP
The V3RNIO/V3RNIO+ interacts with any computer as a joystick (HID), so it is compatible with any flight simulation software. Below, you have two options for setting up your V3RNIO/V3RNIO+ with the most popular flight simulation software: MSFS, Prepar3D, and X-Plane.
Using VFHUB
VFHub is the software built by Virtual Fly to reduce the complicated to the
simple. It is the recommended software setup for your V3RNIO/V3RNIO+. With
VFHub, you can fly your favorite flight simulation software without worrying
about configuring your Virtual Fly flight controls.
You can download the VFHub installer from https://www.virtual-
fly.com/downloads. The VFHub installer takes care of installing VFHub
together with all the required modules. Connect the V3RNIO/V3RNIO+ to your
computer, open VFHub, and start flying right away. VFHub takes care of making
your V3RNIO/V3RNIO+ work with MSFS, Prepar3D, and X-Plane.
- If you use MSFS or X-Plane, set a blank profile to the V3RNIO/V3RNIO+ in the controls or joysticks setup menu before using your device. You can find the detailed steps on how to set a blank profile here: https://downloads.virtual-fly.com/docs/vfhub/latest/VFHUB_SET_BLANK_PROFILES.pdf
- If you want to customize how your V3RNIO/V3RNIO+ works, make sure you read the VFHub user’s manual available at
https://downloads.virtual-fly.com/docs/vfhub/latest/VFHUBUSER’S MANUAL.pdf for detailed instructions on all the tuning and customization possibilities.
Using an alternative joystick configuration
Since the V3RNIO/V3RNIO+ interacts with any computer as a joystick (HID), it is compatible with any flight simulation software. Below, you have a general scheme for setting up your V3RNIO/V3RNIO+ with the most popular flight simulation software: MSFS, Prepar3D, and X-Plane.
MSFS
Assign the axes inside the controls menu, and the V3RNIO/V3RNIO+ will be ready
to be used.
Finally, restart MSFS and verify that the device is configured correctly.
Prepar3D
Open Prepar3D and go to the controls menu. Inside, select the ‘V3RNIO/V3RNIO+’
from the devices list. Assign the axes as you please. Then calibrate the
device following the instructions. Finally, restart Prepar3D and verify that
the device is configured correctly.
X-Plane
Your V3RNIO/V3RNIO+ needs to be calibrated inside X-Plane since axes are
automatically assigned. Open X-Plane, go to Configuration\Joystick, and follow
the calibration steps for your device. Finally, restart X-Plane and verify
that the device is configured correctly.
© 2021 Virtual Fly, SL
All trademarks and brand names are trademarks or registered trademarks of
their respective owners. All rights reserved.
C. Maria Aurèlia Capmany, 21
P.I. La Fàbrica – 08297 Castellgalí (Spain) Phone: (+34) 983 333 301
www.virtual-fly.com
References
- Help Center | Virtual Fly
- Flight Simulation Setup & Support | Virtual Fly
- Virtual Fly | Professional Flight Simulators and Controls
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>