Go Power GP-SF-1.5 SUNfilm Solar Battery Charger Owner’s Manual
- June 3, 2024
- Go Power
Table of Contents
Go Power GP-SF-1.5 SUNfilm Solar Battery Charger
ACCESSORIES INCLUDED
- Male 12V car charger
General Information
Welcome to the Go Power!™ SUNfilm Installation Guide. Please read all the instructions contained within this manual to gain a full understanding of how to install this product.
Warnings
- Avoid All Electrical Hazards. Disconnect batteries and electrical system from any source of electrical power before attempting to install your Go Power!™ SUNfilm. Solar module safety: Photovoltaic modules generate DC electricity when exposed to light.
- Contact with the electrically active parts of the module, such as terminals, can result in burns, sparks, and lethal shock, regardless of the module being connected or disconnected.
- Do not touch the terminals while the module is exposed to light. Cover the module face completely with opaque material to halt the production of electricity when installing or working with modules or wiring.
- Be aware that the solar module is a live power source generating electricity when exposed to any light source. Do not drop the solar module or allow objects to fall on it. Do not concentrate sunlight on the solar module with a mirror or lens.
- Observe proper polarity throughout the SUNfilm installation.
- Follow the Safety Precautions of the battery manufacturer. Do not produce sparks when working in locations where flammable gases or vapors exist.
Specifications
| Rated power | 1.5W |
|---|---|
| Peak current | 100mA |
| Peak voltage | 15VDC |
| Open circuit voltage | 19.6VDC |
| Dimensions (inches) | 6.5 x 14.5 x 0.5 |
| Dimensions (mm) | 165 x 368 x 12 |
| Weight | 0.5 kg / 1 lb |
| Warranty | 5 year limited |
| UPC | 8-39085-00200-1 |
- Specifications subject to change without notice
Note: Specifications are measured values at standard test conditions of 1000 W/m2 at 25° C.
Features
- Portable design
- Rigid frame
- Maintenance free
Accessories
Installation Requirements
- LOCATION: Select a location for the SUNfilm that is in direct sun. If the unit is placed in a shaded area it may greatly reduce power output.
- MOUNTING: Mount the SUNfilm to any flat surface. Secure to the selected location using fasteners or using self-adhesive Velcro strips (not provided). Do not drill or alter the frame in any way, doing so will void the warranty.
- CONNECTION: see section 4.1 for connection options.
- IMPORTANT: Pulling the SUNfilm power cable may cause undo stress on the junction box. The power cable should never support the weight of the module.
Disclaimer of Liability & Warranty
Visit www.gpelectric.com for additional product warranty information.
Go Power!™ warrants the Go Power!™ SUNfilm for a period of one (1) year against defects in materials and workmanship and five (5) years against a power output less than 90% of the rated power output at STC. This warranty is not valid against defects resulting from, but not limited to:
- Misuse and/or abuse, neglect, or accident
- Exceeding the unit’s design limits
- Improper installation, including, but not limited to, improper environmental protection and improper hook-up
- Acts of God, including lightning, floods, earthquakes, fire and high winds
- Damage in handling, including damage encountered during shipment or installation
- Outdoor weather
Repair and Return Information
Visit www.gpelectric.com to read the “frequently asked questions” section of our website to troubleshoot the problem. If trouble persists:
- Call your Go Power!™ Technical Support team (1-866-247-6527).
- Return defective product to place of purchase
© 2011 GO POWER! By Carmanah Technologies
MOBI_MAN_GP-SF-1.5_vA_Nov2011