Go Power GP-MPPT-PRO-40-60-R MPPT Pro Controller Remote User Guide
- June 6, 2024
- Go Power
Table of Contents
Go Power GP-MPPT-PRO-40-60-R MPPT Pro Controller Remote
SOLAR CONTROLLER REMOTE
| Communication Fault Indicator|
5
|
Down Button
2| Communication Connection Indicator| 6| Escape Button
3| LCD Screen| 7| OK Button
4| Up Button|
MAIN MENU
ICON DESCRIPTION
| Steady on| Nighttime|
Related to charging
| Steady on| Daytime
|
Steady on
| A dynamic arrow indicates charging is in process, while
a static one indicates otherwise.
| “Oto 100%”| Current battery capacity|
Related to battery
“0%” in slow| Battery over-discharged
flashing “100%” in quick flashing| Battery over-voltage
|
Steady on
| A bulb shown as left and a dynamic arrow indicate the load is switched on.|
Related to load
|
Steady on
| A bulb shown as left and a static arrow indicate the load is switched off.
|
Quick flashing
| Overload or short-circuit protection
TO SET BATTERY TYPE, VIEW HISTORICAL DATA, AND USE OTHER FUNCTIONS, REFER TO THE USER MANUAL FOR AT GPELECTRIC.COM/MPPT-PRO.
INSTALLATION
The GP-MPPT-PRO-40-60-R installation on a controller case or panel. External
dimensions: 115.82 x 115.82mm Installation dimensions: 96mm or 103.82×103.82mm
Installation hole diameter: ¢ 3.5 (mm)
The GP-MPPT-PRO-40-60-R installation on a Wall. External dimensions: 118.5 x 118.5x48mm Installation dimensions: 50x50mm or 70x70mm Installation hole diameter: ¢ 5 (mm)
USAGE OF NAVIGATION KEYS
The product design features 4 keys which, from left to right, are: They equal to (“Up”, “Down”, “ESC”, “OK”)
KEY I OPERATION
DESCRIPTION
Up|
Tap, press and hold
| 1) When browsing a menu , tap the key for a page up,
-
In parameter setting, tap the key to increase the value by a minimum unit;
-
Press and hold the key for quick page -up movement or value increasing.
---|---|---
Down|
Tap, press and hold
| 1) When browsing a menu , tap the key for a page down;
-
In parameter setting, tap the key to decrease the value by a minimum unit;
-
Press and hold the key for quick page-down movement or value decreasing.
ESC
|
Tap
| 1) When browsing a menu, tap the key to return to the previous level, until the main menu is reached;
- In the setting mode, a tap on this key can cancel the data modification in process and exit the setting mode.
Ok
|
Tap
| 1) In a menu which contains submenus, tap the key to enter into a submenu;
- In a menu with settable or adjustable parameters, tap the key to enter into or confirm parameter setting.
---|---|---
Press and hold
| If “manual mode” is selected as the load mode, a press-and-hold on the key to switch on/ off the load.
If it’s not in the manual mode, a press-and-hold will cause the display to skip to the load mode setting interface as a reminder.
(No te; if no load is co nnecte d to the co ntroller , this funct io n and related lo ad parameters will become inoperative.)
PACKING LIST
| ITEM | QTY | REMARKS |
|---|---|---|
| LCD Display Unit | ||
| Data Cable (25ft) | 6 cores, RJ12 at both ends | |
| KA3 * 12 Black Countersunk Machine Screws | **** |
4
| ****
For installation on a panel
KA4 * 25mm Tapping Screws| 4| ****
For installation on a wall
M6 * 25mm Plastic Expansion Bolts| 4
Find tech tips, manuals and support atgpelectric.com