Razor W15110710020 Vector Front Fender Instruction Manual
- June 3, 2024
- Razor
Table of Contents
Razor W15110710020 Vector Front Fender
Required Tools
- A. Two (2) 5 mm Allen wrenches
- B. Phillips screwdriver
WARNING
To avoid potential shock or other injury, turn power switch OFF and
disconnect charger before conducting any assembly or maintenance procedures.
Failure to follow these steps in the correct order may cause irreparable
damage.
INSTALLATION
- Using two (2) 5 mm Allen wrenches, loosen and remove the axle bolts and slide the wheel down.
- Using a Phillips screwdriver, loosen and remove the two (2) screws that hold the fender onto the fork and slide the fender out from the fork.
- Reverse the steps.
ATTENTION: Charge battery 8 hours before using.
Need Help?
- Visit our website at www.razor.com
- call toll-free at 866-467-2967
- Monday – Friday 8:00am – 5:00pm Pacific Time.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>