Shark HD102 Hair Dryer with IQ 2-in-1 Concentrator User Guide
- June 3, 2024
- Shark
Table of Contents
- Shark HD102 Hair Dryer with IQ 2-in-1 Concentrator
- How it works
- What’s in the box?
- Get to know your 2-in-1 Concentrator
- How to finesse your flow
- Get to know your Styling Brush
- Steps to the smoothest blowout
- Get to know your Curl-Defining Diffuser
- Bring the bounce
- Get to know your AirWave
- Master the best beach waves
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shark HD102 Hair Dryer with IQ 2-in-1 Concentrator
How it works
TIP: Press and hold Cool Shot as desired to lock in your style. All 3 red temp lights will be OFF when Cool Shot is engaged.
What’s in the box?
Not all accessories are included with this model. To order additional accessories, visit sharkbeauty.com.
STYLING WITH THE SYSTEM
When an Styler is attached, Shark™ HyperAir intelligently sets the ideal heat
and airflow settings for fast, healthy styling.
Did you know? You can adjust our recommended temperature or airflow
settings to experiment with different results or to follow your normal
routine.
Get to know your 2-in-1 Concentrator
Get to know your 2-in-1 Concentrator
Swivel concentrator for easy styling
Rotate the concentrator to ensure airflow is always in line with a round brush
when styling.
ADJUST THE AIRFLOW/AJUSTA EL FLUJO DE AIRE
TIP: Press and hold Cool Shot as desired to lock in your style.
All 3 red temp lights will be OFF when Cool Shot is engaged.
How to finesse your flow
- Gentle-dry with the nozzle retracted, applying airflow from roots to ends.
- When excess moisture is gone, extend nozzle and start styling with a round brush. Slide the lever to move from pre-styling mode to precision styling mode. Rotate the concentrator so airflow is always in line with the round brush.
- Apply heat in a downward motion for smoothing. Apply heat at ends for shaping and bending.
- Finish styling by setting shape at ends with Cool Shot.
Get to know your Styling Brush
Dry, straighten, and shine—all at the same time.
Steps to the smoothest blowout
Press the Styling Brush in horizontal position into the head of the hair dryer until it clicks into place.
-
1Loose-dry by pulling the brush through hair with the Detangling Bristles. Pull through to ends.
-
Press the iQ 360˚ button, then turn brush vertically as desired to maximize reach to the back of your head. Pro Tip: Section hair as desired, drying underneath first to build volume at the crown.
-
For smoothing and shining, brush from top to bottom. Use a rounding motion to engage the Smoothing Bristles and grab hair.
Pro Tip: Toggle to low airflow and hold ends around bristles. Set shape by pressing the Cool Shot button. -
For volume and shape, scoop from underneath the roots.
Pro Tip: Toggle to low airflow and hold ends around bristles. Set shape by pressing the Cool Shot button.
Get to know your Curl-Defining Diffuser
Fast, even drying from root to tip.
TIP: Press and hold Cool Shot as desired to lock in your style.
All 3 red temp lights will be OFF when Cool Shot is engaged.
Bring the bounce
Press the Curl-Defining Diffuser into the head of the hair dryer until it clicks into place.
-
Working around your head, bunch curls from ends between the petals of the diffuser, bringing it up to the roots for even drying.
-
Rotate the diffuser back and forth, reaching up to roots. Pause and hold.
-
If desired for more volume, extend prongs to lift roots higher.
Pro Tip: Gather hair in diffuser with prongs retracted, then extend them when you reach the roots to increase grab and maximize flow. -
If desired, flip upside down and bunch from below.
Keep the integrity of your natural curls by switching between low temp and the Cool Shot button.
Get to know your AirWave
Long-lasting waves with less heat.
TIP: Press and hold Cool Shot as desired to lock in your style.
All 3 red temp lights will be OFF when Cool Shot is engaged.
Master the best beach waves
Press the AirWave into the head of the hair dryer until it clicks into place.
-
Begin with mostly dry hair. Select wave direction by turning the lever according to the graphic below.
-
Section hair in 1- to 2-inch sections. Use small sections that are even and square at the root.
Pro Tip: Try different-sized sections to find your favorite wave. -
Turn on the hair dryer. Place section of hair into the AirWave opening.
Guide slowly, lifting it up to the root. -
Hold AirWave upward for 20 seconds, for the best results. Then press Cool Shot to set your style. Slowly pull styler away from hair to expose the wave.
Pro Tip: Use setting or holding spray as desired.
Looking for more inspiration, tips, and tricks? Go to sharkbeauty.com or scan QR code.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>