Razor W13113290027 C25 Handlebar Kit Instructions
- June 3, 2024
- Razor
Table of Contents
Razor W13113290027 C25 Handlebar Kit Instructions
Required Tools
(Not included)
A. 4 mm Allen wrench
WARNING
CAUTION: To avoid potential shock or other injury, turn power switch OFF and
disconnect charger before performing any assembly or maintenance procedures.
Failure to follow these steps in the correct order may cause irreparable
damage.
Step 1
Using a 4 mm Allen wrench, remove the four (4) Allen screws and washers
from the handlebar.
Step 2
Plug in connector. Slide the stem onto the Steer Tube. Be careful not to
pinch wire. Tighten the four (4) handlebar screws and washers securely with a
4 mm Allen wrench.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday – Friday 8:00 AM – 5:00 PM PST.
References
Read User Manual Online (PDF format)
Loading......