Xtorm XP1300 Power Station Portable 1300 Watts 392000 mAh Instruction Manual
- June 3, 2024
- Xtorm
Table of Contents
Xtorm XP1300 Power Station Portable 1300 Watts 392000 mAh
SPECIFICATION
LiFeP04 – 1254Wh (22.4V/56Ah
430x243x240mm
17.5kg
DC 6.5mm input port 11-26 , 160W max
Solar Charging (PV) 12-26 , 250W max
USB-C PD input/ouput 60W
Output AC 2x 22 V/50Hz – 1300W max
Output 2x DC 5.5mm port 12V/5 , 60W max
Output Car charger 12V/10A, 120W max
Output USB 2x US -A 5V/3.1A
lx US -A QuickCharge 3.0 18W
Max output: 1300
AC power cord, Car Charger, MC > Anderson (PV), cable pouch, manual
OVERVIEW
-
A. DC 6.5mm input port:
11-26V, 160W max -
B. Solar Charging input port (PV):
12-26V, 250W max
Output 2x DC 5.5mm port:
12V/5A, 60W max -
C. Output Car charger:
12V/10A, 120W max -
D. 2x USB-A (5V/3.1A)
-
E. 1x USB-A QC 3.0 18W (5V.3A,
9V/2A, 12V/1.5A) -
F. 1x In/Output USB-C PD 60W (5V/3A,9V2.22A, 12V/1.5A)
-
G. Output AC 2x 1300W (220V / 50Hz)
HOW To USE THIS POWERSTATION
Press the button on the output you want to use
FOR USB/DC OUTPUT:
Press 1 second
FOR AC OUTPUT:
Press 2 seconds
The output is working whe the green light turns on. You can now use this
output
TIP: when not using an output, turn it off to save energy.
Recharging the Power Bank
CHARGING FROM WALL CHARGER:
Use the included AC charging adapter to connect to the 6.5mm DC input port.
(max 160W)
You can also connect a use a USB-C PD charger to the USB-C port. (max 6OW)
CHARGING FROM A SOLAR PANEL
Connect your Solar Panel to the Power Station via the included MC4 to Anderson
cable.
This way you can recharge with up to 250W!
IMPORTANT NOTE
When using a Solar Panel to recharge the Power
Station, make sure the power does not exceed 26V.
If more power is Used it can cause serious damage to the Unit.
RECHARGING THE POWER STATION
The Power Station is fully charged when the LCD display shows 100%.
Please don’t use this product with a extension cord with multiple AC outputs. A short-circuit could lead to damage.
Included in the box
When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.
CHARGING FROM WALL CHARGER
Use the included AC charging adapter to connect to the 6.5mm DC input port. (max 160W). You can also connect a use a USB-C PD charger to the USB-C port (max 60W).
Please don’t Use this product with a extension cord with multiple AC outputs. A short circuit could lead to damage.
FAQ & Troubleshooting
Warnings
Don’t drop, dissemble or attempt to repair the charger by yourselt. Avoid
exposure to water or high humidity. Dont expose, to any heat source. Keep out
of reach of children
Don’t use in the presence of tlammable gas.
Telco Accessories has tested the product in a test environment. All
statements/declarations made by Telco
Accessories about the (operation) of the product are based on the results
obtained from such tests. These results/statements/declarations cannot be
guaranteed, for example in cases of deyiating or injudicious Use and/or Use in
a different environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>