V-TAC VT-1524 LED Waterproof Fittings Instruction Manual
- June 1, 2024
- V TAC
Table of Contents
V-TAC VT-1524 LED Waterproof Fittings
Product Information
Specifications
- Model: VT-1524
- SKU: 216485, 216486
- Watts: 24W
- Lumens: 3840LM
- Beam Angle: 80°
- CRI: 0.9
- DF: >15000
- Life Span: 30000h
- On/Off Cycles: >15000
- Body: PC+PC
- Max Operation Type: 11 units connectable
- Input Power: AC:200-240V,50/60Hz
- Temperature: Not specified
- Dimensions: Not specified
Product Usage Instructions
Installation
- Switch OFF the power before starting the installation.
- Fasten the two mounting clips to the installation surface.
- Open the end cap and take out the connector (DWG 1).
- Link to the power source (DWG 2).
- Cover back the end cap.
- Install the lamp to the mounting clips (DWG 3).
- Hanging installation type reference (DWG 4).
- Switch ON the power to test the light.
INSTALLATION DIAGRAM
- Switch OFF the power before starting the installation.
- Fasten the two mounting clips to the installation surface.
- Open end cap and take out the connector (DWG 1).
- Link to a power source (DWG 2).
- Cover back-end cap
- Install the lamp to the mounting clips (DWG 3).
- Hanging installation type reference (DWG 4).
- Switch ON the power to test the light.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCT RANGES, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
TECHNICAL DATA
Dimension
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only
WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his
service agent or a similarly qualified person in order to avoid a hazard.
This marking indicates that this Caution, risk of electric shock.
product should not be disposed of with other household wastes
‘This product contains a light source of energy efficiency class ‘, where
shall be replaced by the energy efficiency class of the contained light
source.
05 YEAR WARRANTY*
1P65
RATING
FAQS
Q: What is the input power requirement?
A: The input power is AC:200-240V, 50/60Hz.
In case of any queries or issues with the product, please reach out to us at: support@v-tac.eu. For more product range inquiries, please contact our distributor or nearest dealers.
Q: What should I do if the external flexible cable or cord of the luminaire is damaged?
A: It should be exclusively replaced by the manufacturer or a qualified person to avoid hazards.
Q: Can the light source of this luminaire be replaced?
A: No, when the light source reaches its end of life, the whole luminaire should be replaced.
Q: How many units can be connected together?
A: For model VT-1524, up to 11 units can be connected.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>