QUOIZEL TF5628MBK Tiffany 2 Light 14 Inch Matte Black Flush Mount Ceiling Light Installation Guide

QUOIZEL TF5628MBK Tiffany 2 Light 14 Inch Matte Black Flush Mount

Ceiling Light

Product Information

Safety Information: The installation guide for TF5628MBK was released on March 3, 2022.

Care of Tiffany Style Shade

A new Tiffany lampshade has an oil film applied to the shade that protects it from scratches during shipment. If the oil applied is too heavy, you can remove the excess oil film with a paper towel. Gently wipe away the excess oil. For general cleaning of Tiffany shades, use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently. If a white powder appears on the soldered joints of the Tiffany shade, this is a normal oxidation process. Use a small amount of lemon oil or mineral oil applied directly to oxidized areas, and the soldered area will return to like new.

Care and Maintenance

• Wipe clean using a soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
• If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00 am – 5:00 pm EST), or visit us online at:  www.quoizel.com.

Package Contents

• Fixture Body A x1
• Spacer Tube C x1
• Flat Washer G x1
• Nipple with Hex Nut B x1
• Check Ring D x1
• Small Knurled Nut E x1
• Big Knurled Nut F x1
• Shade H x1
• Rubber Washer I x1
• Final J x1
• Crossbar Assembly AA x1
• Wire Connector BB x3
• Outlet Box Screw CC x2

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product

WARNING

• RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.

CAUTION

• For your safety, read the instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).

TOOLS REQUIRED

CARE OF TIFFANY-STYLE SHADE

• A new Tiffany lamp shade has an oil film applied to the shade that protects the Tiffany shade from scratches during shipment. If the oil applied is too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
• For general cleaning of Tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently
• If a white powder appears on the soldered joints of the Tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or mineral oil applied directly to oxidized areas and the soldered area will return to like new.

MOUNTING HARDWARE

INSTALLATION

1. Install Nipple with Hex Nut to Fixture Body ****

2. Install Crossbar Assembly

3. Wiring
   

   • White wire from the supply
   • The black (or red) wire from the supply
   • White wire from the fixture
   • Black wire from the fixture
   • The ground wire from the supply
   • The ground wire from the fixture
   • Green ground screw ****

4. Install Fixture Body to Crossbar Assembly

5. Install Bulbs
   Install two correct bulbs referring to fixture markings and/or labels for maximum wattage. Recommended Bulb Type (not included)

6. Install Spacer Tube
   Install Shade using the following:

   • Big Knurled Nut
   • Flat Washer
   • Small Knurled Nut
   • Rubber Washer
   • 7. Install Shade

Your installation is now complete! Restore electricity and save this sheet for future reference.

References

• Quoizel | Artisans In Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>