Vretti TP2 Pocket Thermal Printer User Guide
- June 6, 2024
- vretti
Table of Contents
Quick start guide
packing list
Product introduction
| Product Name: | Star Machine |
|---|---|
| Charging input: | 5V 1A |
| Battery: | Built-in7.4V/1000mAh lithium battery |
| Printing method: | thermal printing |
| Product Size: | 86x86x41.2mm |
| Print speed: | MAX 9mm/s |
| Supplies specifications: | 57x30mm |
| Working environment: | Temperature: 0~45°C |
Humidity: 10~80%
operating system:| Android/IOS
Key Functions
Power switch
- Press and hold for 2 seconds to turn on or off;
- double click to find the QR code.
USB interface
- Charge only
Note: if you use the device for the first time or if you are idle for a
long time, you may not be able to turn it on because the battery is low.
Please charge it for at least half an hour before turning it on!
Open key indicator status
At boot time
Steady on: Normal state; Fast flash: Printer is abnormal
When shutting down
Slow flashing: Charging, full backlight
Download APP
Installation steps
-
the first use, long-press the star machine to open the key 2 seconds to boot, double-click to open the key after booting, the star opportunity automatically prints out the QR code.
-
Search for “Star Machine” in the application store or scan the QR code in the figure below to download and install the Star Machine APP. During the installation process, the application is allowed to obtain the relevant permissions of the mobile phone, register the account and log in.
https://m.starpany.cn/h5/download/download.html -
Open the APP, scan the QR code printed in step 1, and connect to Bluetooth. If the connection is successful, you can use APP to print.
Product warranty card
Product name :|
---|---
Product model :|
Product number :|
Date of purchase :|
Warranty period: From the date of purchase, our company provides a one-
year warranty service.
The following situations will not be provided free warranty:
- Unauthorized disassembly of repair products
- Product barcode, fragile sticker damage, and warranty card alteration and defect.
- Failure to operate the equipment in accordance with the instructions.
- Damage caused by water ingress or falling.
- Due to force majeure caused by failure or damage.
- Outside the warranty period.
Contact number: 0756-2897617
Company Address: 307-2, Zhonglixing Building, No. 4
Xingguo Street, Xiangzhou District, Zhuhai
https://www.facebook.com/Xprinter-909494405886091/
|
https://mobile.twitter.com/Xprintergroup
|
http://weixin.qq.com/r/YikLEy-E8nKNrWtw93xw
---|---|---
|
https://www.youtube.com/channel/UCi9UPJTIsrOGSHnLfNDFEgQ?view_as=subscriber
|
https://www.linkedin.com/company/xprinter-group/
Precautions for use
Do not immerse the printer in water or expose it to rain, otherwise, the
printer may be damaged.
Do not open the paper compartment cover during printing, as this may cause the
printer to malfunction. When printing using Bluetooth, the distance during
printing can not exceed 10 meters, otherwise it may cause garbled printing or
unprintable. Although the printer can operate stably from 0 ° C to 45 ° C,
excessive ambient temperature (45 ° C) or too low ambient temperature (0 ° C)
can result in reduced print quality.
Using poor quality paper or paper that has been stored for too long may result
in reduced print quality or even damage to the printer. The printer tries to
use up and recharge the battery before charging, which can effectively
guarantee the battery life.
Caveat
This product has a built-in lithium battery, do not use it in an environment where the temperature is higher than 45 °C, do not place it near open flames or other heat sources, do not place it in hot sunlight, otherwise, it may cause an explosion or fire hazard. Do not disassemble and replace the battery, if you replace the battery, you must use the same size battery, otherwise, there is a danger of explosion. Used batteries are recycled or disposed of when in accordance with local regulations and product instruction manuals. Note that the thermal head of the print head is a hot component. It is strictly forbidden to touch the thermal sensor part during printing or at the end of printing! Note that the paper exit tearing blade is sharp, please be careful not to touch it!
Printer cleaning
The printer should be cleaned in a timely manner when the printer:
- The printing is not clear;
- The printed page is not clear in the vertical direction;
The cleaning steps for the print head are as follows:
- Turn off the printer power, open the top cover, and remove the paper if there is paper;
- If you have just finished printing, you should wait for the print head to cool completely.
- Use a soft cotton cloth and absolute ethanol (should be wrung out) to wipe off the dust and stain on the surface of the thermal head of the print head;
- After waiting for the absolute evaporation of absolute ethanol, close the upper cover and re-test the machine to print;
Statement
This product is a Class A product and may cause radio interference in a living environment. In this case, the customer may be required to take practical measures to interfere with it.
FCC Statement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
Due to product updates, some details of this document may not match the
product, please prevail in kind!
The manufacturer has the right to modify the content of this document without
prior notice!
Service Information
Customer service line: 0756-2897617
Official website: www.starpany.cn
Manufacturer: Zhuhai yike intelligent technology co., ltd.
Manufacturer Address: 307-2, Zhonglixing Building, No. 4 Xingguo Street,
Xiangzhou District, Zhuhai