xtorm XB401 24000mAh Power Bank Instruction Manual
- October 27, 2023
- Xtorm
Table of Contents
xtorm XB401 24000mAh Power Bank
SPECIFICATIONS
- 24.000 mAh Li-ion / 88.8Wh
- 1x USB-C Power Delivery 60W 2x USB-C Power Delivery 30W
- 185x90x25 mm
- 558 grams
- 1x Built-in USB-C Power Delivery 60W cable1x Manual
PRODUCT OVERVIEW
- In/Output USB-C PD 60W
- USB-C PD 30W
- USB-C PD 30W
- Power Button
- LED Power Indicator
- Built-in USB-C PD Cable
- Official Xtorm Label
When using all outputs:
- 60W
- Share 20W
- Share 20W
CHARGING YOUR DEVICE
- Connect one end of the charging cable to one of the outputs of the Power Bank and the other end to the input of your device.
- For Charging USB-C Ultrabooks use output 1 (USB-C PD 60W)
RECHARGING THE POWER BANK
- Connect one end of the built-in charging cable to output 1 of the Power Bank and the other end to a wall charger.
- For the fastest charging possible use a 60W USB-C PD charger. This will fully recharge the Power Bank within 2 hours.
LED POWER INDICATOR
- Press the Power Button once to display the battery level remaining in the Power Bank via the LED display.
- The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).
- The charging icon will flash when the Power Bank itself is being recharged.
IN THE BOX
- XB401 Titan Power Bank
- Built-in USB-C PD60W cable
- Manual
RECYCLING
When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.
XTORM SAFETY CHECK
-
TEMPERATURE CONTROL
Provided with a temperature control chip that prevents overheating. -
OVERLOAD PROTECTION
Protects both the internal battery as well as the battery of the attached device from overcharging. -
SECURED POWER MANAGEMENT
Automatically picks the correct charging speed and efficiently divides power between attached devices. -
SHORT CIRCUIT PROTECTION
Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm charger and your device from short-circuit damage. -
A-CLASS BATTERY CELLS
We only use the best battery cells that provide the fast charging you need and meet all safety requirements. -
HIGH EFFICIENCY
Our power products are built to power your device as efficiently as possible. This ensures the least possible loss of energy during the charging process.
WARNINGS
Don’t drop, disassemble or attempt to repair the charger by yourself. Avoid exposure to water or high humidity. Don’t expose to any heat source. Keep out of reach of children. Don’t use in the presence of flammable gas. The warranty will lapse in the event of improper use. Telco Accessories has tested the product in a test environment. All statements/declarations made by Telco Accessories about the (operation) of the product are based on the results obtained from such tests. These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.
CUSTOMER SUPPORT
support@tag.nl
+31 (0)30 635 4800
TELCO ACCESSORIES GROUP
Hoofdveste 19, 3992DH Houten
The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>