xtorm AXP300U Portable Power Station User Manual
- June 3, 2024
- Xtorm
Table of Contents
AXP300U Portable Power Station
User Manual
AXP300U
#MOREENERGY
AXP300U Portable Power Station
| 78 000mAh Li-ion 281Wh
---|---
| 240142x154mm
| 3,3kg
| DC 6.5mm input port
USB-C PD input
Output AC
Output 2x DC 5.5mm port
Output Car charger
Output USB Max output:
| Power cord MC4 to DC 6 5mm converter cable manual.
72W(26V max)
60W
300W(230V/50H2)
60W (12V 5A)
120W(12V 10A)
1x USB C PD 60W (5V 3A, 9V2 22A, 12V1 5A)
1x USB A QC 3.0 18W(5V 3A, 9V 2A, 12V 15A)
2x USB A (5V 3 1A) 300W
A DC 6.5mm input port: 72 (26V max)
B Output 2x DC 5.5mm port: 60W (12V 5A)
Output Car charger 120W (12V 10A)
C 2x USB A (5V 3 1A)
D 1x USB A QC 30 18w (5V 3A, 9V 2A, 12V 1 5A)
E 1x n,’Output 0SB C PD 60W (5V 3A 9V2 22A, 12V 1 5A)
F Output AC 300W 230V 5OHz)
HOW TO USE THIS POWER STATION
Press the button on the output you want to use
FOR USB/DC OUTPUT: Press 1 second
FOR AC OUTPUT: Press 2 seconds
The output is working whe the green light turns on. You can now use this
output
TIP: when not using an output, turn it off to save energy.
Please don’t use this product with a extension cord with multiple AC outputs. A short-circuit could lead to damage.
CHARGING FROM WALL CHARGER
Use the included AC charging adapter to connect to the 6.5mm DC input port
(max 72W) You can also connect a use a USB-C PD charger to the USB-C port.
(max 6OW)
CHARGING FROM A SOLAR PANEL:
Connect your Solar Panel directly to the 6.5mm DC input port.
If your solar panel has an MC4 connector, please use the adapter cable that is
included.
IMPORTANT NOTE: When using a Solar Panel to recharge the Power Station, make sure the power does not exceed 26V. If more power is used it can cause serious damage to the unit.
RECHARGING THE POWER STATION
The Power Station is fully charged when the LCD display shows 10O%.
When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.
Specification
How to use this PowerStation
- Press the button on the output you want to use For USB/DC output: Press 1 second For AC output: Press 2 seconds
- The output is working when the green light turns on
- You can now use this output Tip: when not using an output, turn it off to save energy
EU DECLARATION OF CONFORMITY
(In accordance with EN IS0/IEC 17050-1) 
Please don’t use this product with a extension cord with multiple AC outputs. A short-circuit could lead to damage.
Recharging the Power Bank
Please don’t use this product with a extension cord with multiple AC outputs.
A short-circuit could lead to damage.
CHARGING FROM A SOLAR PANEL: Connect yclur Solar Panel directly to the
6.5mm DC input port. If your solar panel hals an MC4 connector, please use the
adapter cable that is included.
Recharge the power bank via the DC in just 5.5 hours.
Power indicator.
Included in the box.
Warning
Don’t drop, dissemble or attempt to repair the charger by yourself. Avoid
exposure to water or-high humidity. Don’t expose to any heat source. Keep out
of reach of children Don’t use in the presence of flammable gas. Telco
Accessories has tested the product in a test environment. All
statements/declarations made by Telco Accessories about the (operation) of the
product are based on the results obtained from such tests. These
results/statements/declarations cannot be guaranteed, for example in cases of
deviating or injudicious use and/or use in a different environment.
Hoofdveste 19
3992 DH Houten The Netherlands
T: + 31 (0) 30 635 4800 F: + 31 (0) 30 635 4801
www.xtorm.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>