Campark SC13 Wifi Low Power Battery Camera User Manual
- June 3, 2024
- CamPark
Table of Contents
Campark SC13 Wifi Low Power Battery Camera
Product Details
Interface Description
| Lens | Capture images andvideos |
|---|---|
| Microphone | Capture ambient sound and support |
v oice interc om
PIR| A trigger signal can be activated when capturing the human body in front
of the device
Pho t oresist o r| Collect ambient brightness value,
enable when the illumination is lower than 2LUX
Reset button| Press and hol d fo r 3 s e c o
nds t o res t ore
factory settings
Micro SD Card slot| A use r in s erts a m e m
o ry c a r d ca n store videos
Charging port| Micro USB Power charging
On/Off| Control device switch
Indicator Light|
-
Slow flashing blue light: wailing for network
configuration
-
Blue light stays on: the network configuration is successful, and the internet is connected.
-
The red and blue lights flash alternately
slowly: the device needs to be reset -
Green light stays on: device is charging
Download APP
Scan the QR code below and click to install or open the Google Play/App store to search for the U-box application, register after downloading and installing
Add Device
- Click “Add a Device”
- Choose “Setup Wi-Fi Device
- After confirming that the blue light on the device is flashing, select “yes”
- Name for the camera, and click “Next”
- Enter WIFI name and password
- Make sure the lens of the device is clean, and scan the QR code of the mobile phone with the lens of the device
- After the configuration is successful, a prompt tone will sound in the mobile APP
- After the device is added successfully, it will appear in the list, click the screen to play
APP menu description
Note: Some functions in the APP menu will be different for different models of cameras
Precautions
- This device is powered by battery, and the battery life will be affected by the wake-up time and times of the device. When the human body sensor alarm detection function is used in a crowded environment, it is recommended to turn off or set the device to low sensitivity to reduce the number of device wake ups and calls to extend battery life. Please charge the device in time when the power of the device is low. Long-term battery shortage may cause the battery to fail.
- During the installation process, please ensure that the network is normal in the installation environment, especially it is installed outside, you need to check whether the Wi-Fi is covered. If the Wi-Fi signal is weak, you need to choose a repeater package or add a Wi-Fi repeater to improve the signal.
- This device is a low-power smart product, which can support APP remote wake-up, PIR human body detection wake-up, key-press wake-up. It is automatically entering the sleep mode after working for a short time. The working time of the device can be set in the APP menu.
If you have any questions, please feel free to contact us at:
SC@yooomail.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>