CamPark RC05 10.26 Inch Smart Screen Player User Manual
- June 9, 2024
- CamPark
Table of Contents
CamPark RC05 10.26 Inch Smart Screen Player
Product Overview
The RCOS 10.26 Inch Smart Screen Players are transmitted through Bluetooth and WiFi.
Product composition list
Product Description
Wiring instructions
The details are as follows
Interface specification
- Apple CarPlay: Special connector for iPhone
- Android Auto: Special connector for Android mobile phone
- /6. Volume button: Oick to adjust the volume
- /7. Brightness button: Oick to adjust screen brightness
- FM Transmit When turned on, the device will transmit the sound to the original vehicle
Apple CarPlay
As shown in the figure, click the [Apple CarPlay] button to enter the Apple
CarPlay. Tum on the Wi-Fi and Bluetooth of the mobile phone first, then as
shown in the figure below, select the [Apple CarPlay] option, dick the [BT
Manage] option of the interface, connect Bluetooth with the phone, you can
open the application. When the machine is powered on, it will try to
automatically connect to the last connected phone.
(Tum off your phone’s Wi-Fi to disconnect, the Apple CarPlay option only
supports iPhone phones, Android phone please select the [Android auto] option)
(The specific connection method is as follows)
Open Carplay
Tum on the Bluetooth and WiFi switch on the mobile phone
Find the t86 xxxxx device name in other devices, Use CorPlay
Connection successful
Tips: Hey, Siri, wake up your phone, listen to music, make phone calls, navigate, check the weather, etc. through your device.
Android Auto
As shown in the figure, click the [Android Auto] button to enter the Android Auto. Tum on the Wi-Fi and Bluetooth of the mobile phone first, then as shown in the figure below, select the [Android auto] option, click the [BT Manage] option of the interface, connect Bluetooth with the phone, and you can open the application. When the machine is powered on, it will try to automatically connect to the last connected phone. (Tum off your phone’s Wi-Fi to disconnect)
- Open Android Auto
- To use Android Auto, Google Pixels phone needs to be Android 8.0 or above.
- For Android phones from another brand, the system needs to be Android 11 or above.
- After connecting the Bluetooth device, it will automatically connect to the WiFi, please do not manually connect to the WiFi device again.
FM Transmit
A5 shown in the figure, click the [FM Transmit] button to enter the FM
Transmit function: it can emit the sound of the equipment, receive it with the
original car radio, and play it through the original car horn, enjoying the
original car level. When you turn on the FM Transmit option, the monitor will
no longer emit any sound. At this time, you need to turn off the FM Transmit
or match the sound to the car’s built-in stereo to have sound.
(Not using the original power cord will cause the FM Transmit signal to
deteriorate or the function cannot be used.)
- Oick the Open device button
- Selects the frequency band to be emitted, for example, the FM 91.0 MHZ.
- Car radio also adjusts the acceptance band to FM 91.0 MHZ.
- Car radio can connect to the FM Transmit signal of the upper system.
(Prompt: this device has no sound when FM transmission is turned on)
FAQ
- Because the output current is unstable when the car starts, please turn off the FM before stopping the car. otherwise, the FM will make a noise when you start the car again.
- When you use the FM to connect the carplay, please don’t use the same frequency as the broadcast, otherwise the carplay will be frequency bumping and have no sound. you can use the AUX cable to connect the carplay, which can effectively solve this problem.
- After our research, it will affect some functions of the carplay and reduce the customer’s experience when the carplay is equipped with a camera. so we remove the camera function to bring you the most extreme service.
- After connecting to the Carplay/Android Auto, please wait for 10-20 seconds. and then the system will Auto Connect your phone.
- Before connecting again, please turn on Bluetooth and WIFl, the system will auto connection your mobile phone.
- Please according to our suggestion to connect the power circuit, and avoid interference when the machine is started.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>