speck 150660 Gemtones Infinity Mid Bluetooth Speaker User Manual

speck 150660 Gemtones Infinity Mid Bluetooth Speaker User Manual

PRODUCT KEY

1. Light Effects Button
   Click: Changes light show effects
   Long Press: (3 seconds) switch lights on/off

2. Plus Button
   Click : Volume up
   Long Press:

3. (3s) Next track

4. (10s) Clear pairing list/Restore factory settings

5. Power Button
   Click

6. Play/Pause music

7. Pick up/Hang up calling
   Long Press

8. (3s) Switch on/off

9. (3s) Reject calling

10. LED Indicator

11. Microphone

12. Minus Button
    Click : Volume down
    Long Press

13. (3s) Previous track

14. (10s) Deadlock recovery

15. Bluetooth Button
    Click: Enter/Exit TWS mode
    Long Press: (3s) Enter/Exit Speaker Pairing Mode

16. AUX 3.5mm Port

17. USB-C Charging Port

BLUETOOTH PAIRING

1. Press and hold the power button for 3 seconds to power on the speaker, it will turn to Bluetooth® mode by default while there is no other connection. If the LED blue light flashes quickly (2 times per second), it means it’s ready to pair.
2. On the Bluetooth device, switch on Bluetooth setting and select “Gemtones Infinity Mid.”
3. After successful connection, you’ll hear a prompt chime and notice the blue LED light change from flashing to steady.

TRUE WIRELESS STEREO MODE (TWS)

To sync two speakers for stereo sound turn on two of the same model of Gemtones Infinity speakers and click the Bluetooth button on both speakers at the same time.

The two speakers should sync automatically, you’ll hear a prompt chime and the blue LED lights for both speakers will change from flashing to steady. The controls for either of the paired speakers will control the other.

MULTI-SPEAKER PAIRING MODE

You can use multiple Infinity speakers with Multi-Speaker Pairing Mode to play the same music on every speaker. This combines all your Infinity speakers into one large speaker.

1. Connect the first Infinity speaker (host) to your Bluetooth device by following the Bluetooth Pairing instructions.

2. Then long press the Bluetooth button of the host speaker for 3 seconds to enter Multi-Speaker Pairing Mode. You’ll hear a prompt chime.

3. Turn on the second Infinity speaker and long press the Bluetooth button for 3 seconds. You’ll hear a prompt chime.
   NOTE: Speakers that are paired to your Bluetooth device will NOT pair to the host speaker. Before attempting to pair to host speaker, remove them from device list in your Bluetooth settings.

4. After a few seconds the blue LED light of the host speaker will stay steady and the second speaker LED light will turn off. The speakers will be paired and can now play together.

To connect even more Infinity speakers to the host speaker repeat steps 3 & 4 for each additional Infinity speaker.
The controls of the host speaker will control the other paired speakers.

NOTE : The Gemtones app on your mobile device will not connect to the Infinity speaker while in Multi-Speaker Pairing Mode. Turn off Multi-Speaker Pairing Mode to reconnect to the Gemtones app.

When accepting a phone call under Multi-Speaker Pairing Mode, the audio will come through the first speaker only, the other paired speakers will disconnect. If your call ends within 5 minutes, the other paired speakers will automatically reconnect. If longer, you will need to pair secondary speakers to the host speaker again, using steps 3 & 4 above.

TRUE WIRELESS STEREO MODE

SPEAKER PAIRING MODE

PAIR DEVICE TO 1st (HOST) SPEAKER
THEN LONG PRESS 3 SECONDS
LONG PRESS (3S) 2nd SPEAKER, 3rd SPEAKER, AND SO ON

POWER CONTROL

• If the Bluetooth connected Gemtones Infinity speaker is not in use, it will enter standby mode after 15 minutes.
• Gemtones Infinity speaker will power off automatically if disconnected after 5 minutes.
• Low battery notification beep will occur when the battery is lower than 10%.

CHARGING

• Charge the Infinity speaker by using the included USB-C charging cable, connecting it to a USB power source. *Charging adapter not included.

WARNING FOR BATTERY

Please do not handle the battery in the following manners. It can lead to an explosion or leakage of flammable liquids and gases.

• Dispose in fire, discard, crush or cut.
• Leave in extremely high temperature environment.
• Leave in extremely low pressure environment.

FREE APP DOWNLOAD

Control sound equalisation and light show settings. SpeckProducts.com

SPECIFICATIONS

GEMSTONES™ INFINITY MID

• Bluetooth Wireless

• Material : ABS+Silicone+PU

• Music playback time:
  6.5 HOURS (lights ON, 50% volume);
  24 HOURS (lights OFF, 50% volume)

• Audio reach: Within 400 square meters at 100% volume

• 3.5mm AUX input

• Charging interface : Type C port

• Product sizes : 9.3″ H x 5.9″ W x 3.7″ D

• Input : 5V/2A

• Charging time: Around 3 hours

• With USB-C to USB-C Charging cable (1.2M)

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

| Material Spec: SBS .012 with Soft touch matt PP (0.018mm)
---|---
Finish/Coating: Matte varnish
Part Description:| GEMTONES INFINITY MID USER MANUA| Print Spec: 312C 424C
Part Name:| GEMTONED-INFNTY-TWS-MED-MANUAL-C9| Blank Size: 560mm X 107mm
Part #| 3041514| Legend: Other Specs:
Dyeline #:| D-1XXX| Black: cut line (DO NOT PRINT)
Red: fold line (DO NOT PRINT)
Green: annotation (DO NOT PRINT)
Template # 2015-06-18-1530
Release Date:| 05/21/24
Rev Control| Description| Creative Services| Product Marketing| Pig Design Engineer| Pig Project Manager| Legal
---|---|---|---|---|---|---
Rev: 1| Initial Release| | | | |

References

• Protective Cases for iPhone, iPad, MacBook, Samsung, and more! | Speck Products

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>