CONCEPT TE3040 Toaster Stainless Steel User Manual

: June 5, 2024
: concept

Table of Contents

CONCEPT TE3040 Toaster Stainless Steel
ACKNOWLEDGMENT
Technical parameters
IMPORTANT SAFETY INSTRUCTIONS
PRODUCT DESCRIPTION
OPERATING INSTRUCTIONS
CLEANING AND MAINTENANCE
ENVIRONMENTAL PROTECTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CONCEPT TE3040 Toaster Stainless Steel

ACKNOWLEDGMENT

Thank you for purchasing a Concept product. We hope you will be satisfied with our product throughout its service life. Please study the entire Operating Manual carefully before you start using the product. Keep the manual in a safe place for future reference. Make sure other people using the product are familiar with these instructions.

Technical parameters

Voltage| 220-240 V ~ 50 Hz
*OQVU| 780-930 W

IMPORTANT SAFETY INSTRUCTIONS

Use the unit only as described in this operating manual.
Remove all the covering and marketing materials from the unit before the first use.
Make sure the mains voltage corresponds to the values stated on the product’s rating plate.
The unit reaches high temperatures during operation and remains hot for some time after being turned off. Do not touch the hot surfaces. Use the handles and buttons. There is a risk of being burned.
The unit may not be cleaned, stored, or covered until it has cooled down completely.
Do not put the unit on its side during operation.
Close supervision is necessary when the unit is on or plugged into the socket.
Never carry the unit during operation or while hot. Do not carry the unit by the power cord.
Never pull the cord to disconnect the plug from the socket; hold the plug instead.
The appliance is not intended for and should not be accessible to children or people with reduced capabilities.
Persons with limited movement capacity, reduced sensory perception, insufficient mental capacity or those who are unaware of the proper handling should use the product only under the supervision of a responsible, aware person.
Pay the utmost attention when using the unit close to children.
Do not use the appliance as a toy.
Turn the unit off, disconnect the power cord from the wall outlet, and allow the unit to cool before cleaning.
Do not let the power cord hang loosely over the edge of a table. Make sure the power cord does not touch hot surfaces.
The unit may only be installed on a stable surface resistant to high temperature, away from other heat sources, such as heating bodies, ovens, etc. Do not expose the unit to direct sunlight or moisture.
Do not use the unit in an environment with explosive gases or flammable substances (solvents, varnishes, adhesives, etc.).
Caution- Bread may ignite! When using the unit, keep sufficient space around and above the unit to ensure sufficient air circulation. Do not let the unit come into contact with curtains, wall linings, textile, paper, or other combustible materials while in operation. In addition, it is not recommended to install the unit near or under the above materials. Do not put any of these materials on top of the unit.
Do not use the unit without the removable crumb tray. The tray shall be cleaned regularly. Do not allow crumbs to accumulate on the tray. They could touch the heating body and ignite.
Do not insert any metal objects into the unit. Do not use knives, forks, or any other metal kitchen implements for removing toast or crumbs. These could cause a fire or a short-circuit. There is a risk of injury.
Do not insert excessively big pieces of food into the unit.
Do not prepare any food containing jam or marmalade in the unit.
Do not take the food out during operation. In case you need to take it out, switch the unit off by pressing the STOP button.
Do not use abrasive or chemically aggressive substances to clean the unit.
Do not use the unit if it does not operate properly or if it has been dropped, damaged, or exposed to any liquids.
Take the unit to an authorized service center for testing and repair.
Never use the appliance if the supply cord or plug is damaged. Immediately refer to an authorized service center for repair
The unit is not designed for outdoor use.
The appliance is intended for domestic use only, not for commercial use.
When unplugging the unit from the wall outlet, make sure the unit has been turned off (bread lowering lever in the upper position), then disconnect the plug from the wall outlet.
Never operate the appliance with wet hands.
Do not immerse the power cord, plug, or appliance in water or any other liquid.
Use manufacturer-recommended accessories only.
Do not try to repair the appliance; instead, refer to an authorized service center.

Failure to follow the manufacturer’s instructions may lead to refusal of warranty repair.

WARNING!! Never try to remove wedged bread using a knife or any other tool. Touching the live parts with these objects may cause an electric shock. Unplug the unit from the mains, let it cool down, and remove the bread carefully.

PRODUCT DESCRIPTION

Bread insertion slots
Button with operation indicator (defrost)
Button with operation indicator (stops toasting)
Button with operation indicator (reheating)
Bread lowering lever and power on
Toasting time selector
Crumb tray
Outer cover

CONCEPT-TE3040-Toaster-Stainless-Steel-fig-1

OPERATING INSTRUCTIONS

CAUTION

Prior to using a new unit, wipe the surface with a wet cloth and wash the crumb tray in warm water for hygienic reasons.Do not insert any bread into the unit, set the longest toasting time (toasting time selector at position 5), and turn on the unit (see the Toasting section). Repeat this process five times. The unit may emit a slight smell and smoke, which should disappear after a while. Air the room well during this process.

Toasting bread

Uncoil the supply cable.
Connect the power cord plug to the wall outlet.
Insert two slices of white or other bread to be toasted into the slots (1).
Set the required toasting time using selector (6). Positions 1- 7 corresponding to the required toasting level (1 = lightest,7 = darkest). The toasting time should be set according to the user’s personal taste and the type and freshness of the bread used. If you are using the unit for the first time, we recommend selecting position 3 or 4 (Fig. 1).
Lower the bread into the toasting slots by pressing the lever (5) downwards until it clicks and remains in this position. The unit turns on. The operation indicator goes on. Note: If the unit is not connected to the mains, the lowering lever will not remain in the lowered position.
You may select any additional toasting function as needed (the appropriate button will be illuminated).
- Defrost function- This function is designed for toasting frozen bread. It extends the toasting time by the time needed for defrosting bread.
- Reheat function- Iffi’s finished toast cools, you may reheat it for 25 seconds using this function.
Finished toast is ejected automatically after the selected toasting time expires. For easier removal, you can raise the toast up several millimeters using the bread lowering lever (5)
If you want to stop toasting before the selected time elapses, press the STOP button (3).
Unplug the unit from the mains after you finish toasting

WARNING!

The bread may ignite if the unit is not set or used properly. Never leave the unit unattended while in use, to be able to turn if off immediately, if needed. The unit reaches high temperatures during operation and remains hot for some time after being turned off. Do ot touch hot surfaces. Use the handle and buttons.

CLEANING AND MAINTENANCE

WARNING!

Before cleaning the unit, always disconnect the power cord from the wall outlet! Prior to handling, make sure the unit has cooled down! The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard objects, as they may damage the unit’s surface! Remove the crumb tray, empty it, and install it back into the unit before the next toasting operation. Do not let crumbs accumulate in the lower section of the unit. If crumbs remain inside the toaster, turn it upside down and remove crumbs by slight knocking. Never clean the unit under running water, do not rinse it, and do not submerge it in the water!

Storing the unit

Unplug the unit from the mains after use, let it cool down, and store it in a safe and dry place. The supply cable can be wound to the holder placed underneath.

REPAIR & MAINTENANCE

Any extensive maintenance or repair that requires access to the inner parts of the product must be performed by an expert service center.

ENVIRONMENTAL PROTECTION

Packaging materials and obsolete appliances should be recycled.
The transport box may be disposed of as sorted waste.
Polyethylene bags shall be handed over for recycling.

Appliance recycling at the end of its service life:

A symbol on the product or its packaging indicates that this product should not go into household waste. It must be taken to the collection point of an electric and electronic equipment recycling facility. By making sure this product is disposed of properly, you will help prevent the negative effects on the environment and human health that would otherwise result from the inappropriate disposal of this product. You can learn more about recycling this product from your local authorities, a household waste disposal service, or in the shop where you bought this product.