wintact WT9066 Digital Lux Meter Instruction Manual
- September 29, 2024
- wintact
Table of Contents
wintact WT9066 Digital Lux Meter
Introduction
The digital lux meter is a professional instrument for measuring illumination and brightness, which can be used in light intensity measurement engineering, quality control, illness prevention and treatment, and measurement of light intensity in all kinds of environments such as factories, schools, offices, transportation routes, families, etc.
Features
- Measure current illumination and temperature.
- Measure maximum/minimum/difference value and data hold.
- Switch between illumination and temperature unit.
- The measurement range is 0~200,000 lux, auto switch of measurement gear.
- The setting of automatic power off 6. LCD backlight.
Name of parts
- Power / LCD Backlight button
- Mode selection button
- Unit selection button
- LCD
- Photometer head
- Back sticker
- Battery door
- Shade cover
LCD
- Data hold
- Maximum value
- Minimum value
- Automatic shutdown
- Battery volume
- Multiply indicator
- Illumination value
- Temperature value
- Illumination unit
- Difference value of illumination
- Temperature unit
Operating Instructions
-
Power on/off
(1) Power on: When shutting down, short press the power button to turn on.
(2) Shutdown: After turning on, long press the power button to shut down;
(3) Automatic shutdown: After shortly pressing the power button to turn on, there is no button operation, and it will automatically shut down after about 10 minutes; Long press the “MODE” button to activate the automatic shutdown function, and long press the “MODE” button again to cancel the automatic shutdown. It has a power-off memory function. -
LCD backlight
After turning it on, short press the power button, LCD backlight is on, short press the power button again, LCD backlight is off. -
Data hold/Difference/Maximum/Minimum value
After turning on, short press the “MODE” button to switch modes successively: Data hold[HOLD]-Difference[A] – maximum[MAX] – minimum[MIN] – Exit Note: The difference is the absolute value of the Illumination value before short pressing the button minus the immediate Illumination value. -
Unit selection
After turning it on, long press the “UNIT” button to switch temperature units: “C, “F; short press the “UNIT” button to switch Illumination units: LX, FC; It has a power-off memory function.
Technical Parameters
*1Fc=10.764Lx; 1Lx=0.09290Fc
Specific Declarations: Our company shall hold no responsibility for using output from this product as direct or indirect evidence. We reserve the right to modify product design and specifications without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>