Innocn S1-32 32 Inch Movable Ultra Large Screen Installation Guide
- September 28, 2024
- INNOCN
Table of Contents
Innocn S1-32 32 Inch Movable Ultra Large Screen
Specifications:
- Display screen: 1
- Base: 1
- Pillar: 1
- Adapter: 1
- Remote: 1
- Screw pack: 1
- AAA battery: 2
- Instructions: 1
- Certificate of conformity: 1
Product Usage Instructions
Installation Instructions:
- Check the item list to ensure all attachments are included.
- Follow the installation instructions for base and rod body provided in the manual.
- Install the display screen according to the display installation instructions.
Angle Adjustment:
The angle of the product can be adjusted for a comfortable viewing experience. Note that some applications may not support vertical display.
Connecting External Devices:
Follow these steps to connect external devices:
- ON/OFF: Turn the machine on or off.
- HDMI: HD signal input interface, supports 1920*1080 resolution.
- USB: Can be used for USB storage devices or as a receiver for mouse and keyboard.
- TYPE C: For firmware upgrades.
- DC-IN: Connect the power adapter.
Using Built-in Battery:
Refer to the manual for instructions on using the built-in battery.
Flying Mouse Remote Control Instructions:
- Battery Installation: Remove the battery case cover and insert two AAA batteries ensuring correct polarity.
- Pairing Instructions: Long press OK + Back buttons until the indicator light flashes, then pair with Bluetooth device named BLE_G10 in Settings – Bluetooth menu on screen.
Bluetooth and Wireless Network Settings:
Access Settings for Bluetooth and WLAN to connect to available devices and networks. Follow on-screen instructions for successful pairing and network connection.
FAQ
Q: What should I do if any attachments are missing?
A: If any attachments are lost or missing, please contact the dealer for assistance in obtaining the required items.
Item List
Please check if the following attachments are randomly shipped. If they are lost or missing, please contact the dealer 。
Serial Number| Name| Number
1| Display screen| 1
2| Base| 1
3| Pillar| 1
4| Adapter| 1
5| Remote| 1
6| Screw pack| 1
7| AAA battery| 2
8| Instructions| 1
9| Certificate of conformity| 1
Installation instructions
Installation instructions for base and rod body
- Remove the first layer after opening the package
- Remove the base and rod body
- Connect the power wiring inside the rod
- Align the two parts of the rod body with the slot and lock the screws
- Place the base in the foam slot
- Align the rod body with the slot position on the base
- Align the screw holes and lock the screws
- Tilt the display up and align it with the clamp position of the support rod
- Wrap the power cable clockwise and plug it in. Then arrange the power cable and insert the fixing slot
- Align the positioning hole of the ring trim with the positioning column of the rear shell and press it
Note: During disassembly, when removing the display from the rod, you need to press the quick disassembly button
Angle adjustment
The Angle of this product can be adjusted for a comfortable viewing experience.
Note: Some applications do not support vertical display.
The connection of external devices
- ON/OFF : Turn the machine on or off
- HDMI: Hd signal input interface, support 1920*1080.
- USB: Can use USB storage device, or for mouse and keyboard receiver.
- TYPE C: For firuware upgrade
- DC-IN: Connect the power adapter.
Use built-in battery
A Lookout:
- It takes about 4 hours to charge while using, and only 2 hours to charge fast while shutting down.
- The battery life and use time after charging will decrease proportionally with the product’s use.
- The battery cannot be charged under extreme conditions.
- In the standby state, the remaining battery power will naturally decrease.
- To extend battery life, it is recommended to charge the battery after a period of use, rather than keep the battery fully charged.
- Keeping your battery at 50% will help extend battery life.
- The maximum usage time after charging is 3 hours.
- Battery life may vary depending on various factors such as connected device, operating temperature, use time and user Settings, so actual battery life may vary depending on usage.
Flying mouse remote control instructions
Remote control battery installation method
Remove the battery case cover and install two AAA (No. 7/1. 5V) batteries, ensuring that the polarity of the batteries is consistent with the polarity marks “+”, “-” in the remote control battery case.
Pairing instructions for the Bluetooth remote control:
Long press the “OK + Back” button until the indicator light flashes continuously, then in the “Settings – Bluetooth” menu on the screen, click to pair with a new device, search for the Bluetooth device named “BLE_G10”, select the device and click to pair, and the remote control pairing is completed.
Bluetooth Settings
Click “Settings › Bluetooth”, turn on Bluetooth, and the system will start searching and displaying a list of nearby available Bluetooth devices. Click on the name of the device you want to connect to, and follow the system’s instructions. Once the pairing is successful, you can view the corresponding device name in the “Paired Devices” section.
Wireless Network Connection
Click on “Settings > WLAN” and turn on WLAN. The system will start searching
for and listing available wireless network signals. Click on the network you
want to connect to. Networks with a ” ” icon indicate that they are encrypted
and require the correct password to connect to the network.
Note: You can perform more system Settings in Settings as required.
FCC Statements
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>