eeese 2534 Dehumidifier Lukas User Manual

eeese 2534 Dehumidifier Lukas

Specifications

• Product: Dehumidifier Lukas
• Art. no.: 2534 & 2537
• Website: eeese-aircare.com
• Refrigerant: R32 (flammable)

Product Usage Instructions

Safety Instructions

• Installation: This product should be installed or uninstalled by an authorized electrician to prevent damage and ensure safety.
• Indoor Use: The appliance is intended for indoor use only in private homes to avoid risks of fire, electric shock, or other injuries.
• Power Cord: Do not place heavy objects on the power cord to prevent safety risks.
• Avoid Flammable Objects: Do not place flammable and explosive objects around the appliance to prevent fire hazards.
• Stability: Place the appliance on a stable, flat surface to ensure proper functioning.

During Use

• Moving the Device: Turn off the power and unplug the device before moving it.
• Supervision: Ensure children do not play with the appliance to prevent accidents.
• Avoid Impact: Do not knock over or subject the device to impact or shock to prevent malfunction.
• Air Outlet: Do not place your hands on the air outlet to avoid damage or malfunction.
• Avoid Water: Do not pour water into the appliance to prevent malfunction.
• Avoid Covering: Do not cover the appliance during use.

Parts List

• Extension cord for control panel
• Extra control panel
• Screw x 5
• Feet x 4
• Drain Pipe 2m (16 mm)
• Hanging Bracket
• Hanging Strip for Wall
• Wall Pads
• Air Outlet
• Control Panel
• Foot
• Air Inlet (in the bottom)
• The air intake filter is installed

Control Panel

• Dehumidifier Mode
• WIFI Connection
• Compressor
• Compressor Speed
• Humidity Level
• Working Mode
• Up Button
• Down Button
• Temperature
• Timer Setting
• On/Off Button
• Work Mode
• Timer

Before Operation

Airflow:
Ensure proper airflow by maintaining specified distances for air inlet and outlet as indicated (1m).

Frequently Asked Questions

Q: Can this dehumidifier be used in commercial settings?

A: No, this dehumidifier is intended for indoor use in private homes only.

Q: How should I clean the air intake filter?

A: The air intake filter can be cleaned by gently vacuuming or washing it with mild soap and water. Allow it to dry completely before re-installing.

Q: What should I do if there is a refrigerant leak?

A: In case of a refrigerant leak, immediately ventilate the area, turn off the device, and contact a professional technician for assistance.

Thank you for choosing this product. Please read this instruction manual before using it.

• Read the user manual before use, refer to the corresponding section of these user instructions.
• Recycle unwanted materials instead of disposing of them. All appliances and packages must be sorted and delivered to a regional recycling centre and processed in an environmentally friendly manner.
• The product complies with the applicable EU directives and other provisions.
• This device uses a flammable refrigerant.
• If refrigerant leaks and comes into contact with a fire or heating element, it creates harmful gas and there is a risk of fire.

Safety instructions

Important!
This product should be installed or uninstalled by an authorized electrician. It is not recommended to try to install it yourself, as it may cause damage to the dehumidifi-er and pose a risk to your safety.

Warning
This appliance is intended for indoor use only in private homes. Any other use is not recommended by the manufacturer and may cause fire, electric shock, or other personal injury or damage.

Power cord

Location

During use

Parts list

Components

1. Extension cord for control panel

2. Extra control panel

3. Screw x 5

4. Feet x 4

5. Drain Pipe 2m (16 mm)

6. Hanging Bracket

7. Hanging Strip for Wall

8. Wall Pads

9. Air Outlet

10. Control Panel

11. Foot

12. Air Inlet (in the bottom)

13. The air intake filter is installed
    Control Panel

14. Dehumidifier Mode

15. WIFI Connection

16. Compressor

17. Compressor Speed

18. Humidity Level

19. Working Mode

20. Up Button

21. Down Button

22. Temperature

23. Timer Setting

24. On/Off Button

25. Work Mode

26. Timer

Before operation

• Place Lukas in an upright position on a stable, level surface.
• Ensure that the dehumidifier is at a safe distance to achieve optimal airflow. Lukas can be placed as illustrated on A (on the floor) and B (mounted on the wall), at least 1 meter from the roof. There must be 2 meters free space from the front of Lukas.
• Note that the voltage supplying the unit must conform to the unit’s value and the socket must be grounded.
• Turn on the power and start the machine according to the instructions below.

Placing the unit on the floor
The unit includes four feet. Align the foot to the mounting hole of the dehumidifier chassis and turn it in a clockwise direction, picture 1.

IMPORTANT!
Do not flip the unit during installation! If the unit has been flipped always wait an hour before use.

Connect the drain pipe, and connect the power cord according to the wiring diagram

• A: Power Cord Entry
• B: Drain Outlet (drain pipe included),
• C: Foot

Mounting the unit on the wall

Step 1
The concrete foundation of the selected wall should be firm.

Mount the bracket (picture 2) to the wall by attaching the five (included) screws to the holes in the wall.

Step 2
Place the pad A (picture 3) on the wall-mounting holes behind the unit.

Step 3
Hang the unit (picture 4 – 5) from the hanging strip on the back and on the wall-fastened bracket. Make sure the pads are resting against the wall, picture 5 – A.

Step 4
Connect the drain pipe, and connect the power cord according to the wiring diagram

• A: Power Cord
• B: Drain Outlet (drain pipe included)

Installation of extension cord and extra control panel
The dehumidifier comes with an extra control panel with a corresponding extension cord, so you can install the extra control panel in a technical room or similar, where others do not have access to manipulate the dehumidifier’s settings.

Important!
Remember to unplug before installation

Instruction manual

Switching the unit on/off
Connect the power supply and press the on/off button (A) once to turn on the device.

Temperature display
Press the arrow keys A and B simultaneously for five seconds to switch between Celsius (C) and fahrenheit (F)

Working Mode
Lukas can work in “Smart mode” (B) and “Silence mode” (C). The working capacity in “Smart mode” is up to ~100% and in “Silence mode” capacity is up to ~80%. By default, Lukas is set to work in “Smart mode”. Pressing A will change between “Smart mode” and “Silence mode”.

Dehumidifier function
The humidity setting range is between 30% and 95%. Lukas is by default set to 70%. Press A or B to set the humidity percentage. The humidity setting range is between 30% and 95%. Lukas is by default set to 70%.

Timer settings
The device can be set to turn off or turn on with the timer.

Timer – turning on settings
When the dehumidifier is on or off, press A to enter the timer setting. This will light up B and C will start flashing. Now press D or E to adjust the hour setting. Next, press A to set the minute and adjust with D or E. Save the setting by pressing A three times. Observe that C stops flashing and keeps lighted instead. By not pressing D or E the timer is cancelled.

Timer – turning off setting
When the dehumidifier is on or off, press A to enter the timer setting. This will light up B and C will start flashing. Press A two times for the timer offsetting. F will now flash instead. Now press D or E to adjust the hour setting. Next, press A to set the minute and adjust with D or E. Save the setting by pressing A. Observe that F stops flashing and keeps lighted instead. By not pressing D or E the timer is cancelled.

Timer – turning on & turning off settings
When the dehumidifier is on or off, press A to enter the timer setting. This will light up B and C will start flashing (this starts the turn-on setting). Now press D or E to adjust the hour setting. Next, press A to set the minute and adjust with D or E. Press A, and F will start flashing (this starts the turn-off setting). Now press D or E to adjust the hour setting. Next, press A to set the minute and adjust with D or E. Save the settings by pressing A. Observe that C and F keeps lighted.

Cancelling the timer
Press A to enter the timer setting. Press A again, this will cancel the turn- on setting. Press A once gain, this will enter the turn-off setting and lastly press A for canceling the turn-off settings.

Cleaning

When the appliance is used regularly, the filter can become clogged with dust and particles. Therefore, the filter should be cleaned at least every two weeks. Follow these steps:

1. Turn off the unit and unplug it before cleaning.
2. Clean the cabinet with a soft, dry cloth. If the unit is very dirty, use a mild detergent. Wipe the dehumidifier with a slightly damp cloth. Never spray water on the unit.
3. Remove the filter (air inlet in the bottom), and clean the filter with a vacuum cleaner or soapy water no hotter than 40°C.

Storage

If the unit will not be used for an extended period, do the following:

1. Unplug the unit.
2. Clean the air filter with a vacuum cleaner.
3. Make sure the device is in perfect condition so that it is safe to use again after a long storage period.
4. Store the unit in appropriate packaging.
5. Store the unit in a dust-free place and out of direct sunlight. It is recommended to cover it with a piece of plastic.

Display Error Codes

Please contact your local distributor if any of the error codes below appear.

Troubleshooting

Before contacting technical Support, check the following.

PROBLEM

| POSSIBLE CAUSE|

SOLUTION

---|---|---

Unit not working

| The power is not connected.| Plug into the socket.
Burned fuse.| Check and change the fuse.
The breaker is off.| Check and turn on the breaker.
The display is normal, but no dehumidification| The humidty set is too low.| Set proper humidity percentage.
3 minutes start delay.| Wait patiently.

IMPORTANT!
Please do not try to repair the dehumidifier by yourself to avoid any risk.

Technical specifications

1. Dehumidification Efficiency Ratio
2. The temperature of these products can only work normally within the range of 10 °C ~ 38 °C. If it exceeds this range, the performance will not be guaranteed; please note that the performance parameters of the dehumidifier will be different under different working conditions.
3. The above data is adapted to the power cord is ≤10m. If the power cord is ≥10m, the wire diameter must be increased.

The above technical data is for reference only. We reserve the right to change them without notice.

Dimensions

Varenummer| A

mm

| B

mm

| C

mm

| D

mm

| E

mm

---|---|---|---|---|---
2534| 236| 1010| 740| 100| 813
2537| 236| 1190| 920| 100| 813

Electrical Wiring Diagram

WI-FI setting

1. APP Download
   Download the “Inverter Life” app.

2. Account Registration

   • Agree to the “Privacy Policy”.
   • Press “Register”.
   • Registration by mobile phone number or E-mail.
   • Enter the authentication code sent to you by E-mail or SMS.
   • Set a login password.

3. App Connection
   Please make sure your mobile phone is connected to the home Wi-Fi configured to 2.4GHz. Additionally, Bluetooth must be enabled on your mobile phone.

   • a) Wi-Fi connection:
     After turning on the unit, press the start button for 3 seconds. The Wi-Fi indicator will be flashing and the unit will be ready to connect.

   • b) Add Device
     Press “Add device” and follow the instructions on the app to finish the connection. The Wi-Fi indicator will stop flashing on the unit once the connection has succeeded.

   1. Press “Add Device”. The app will now start scanning for devices.
   2. When your device shows up press on it.
   3. Press “Confirm …”.
   4. Enter the correct information and press “OK”.
   5. Press “Allow…”.
   6. The app is connecting.
   7. Press “Completed”.

   • c) Connection Failure
     If the connection fails, please make sure your network name and password are correct. Also make sure your router, mobile phone, and device are as close as possible.

   • d) Wi-Fi Reconnection
     If the Wi-Fi password or network changes configuration it is necessary to reconnect: Press the start button for 10 seconds. The Wi-Fi indicator will now start to flash slowly for 60 seconds and the Wi-Fi indicator will be off. The original connection will be deleted. Restart a new connection as shown above, “App Connection”.

4. Operation
   Note
   The unit is not equipped with electric heating.
   

5. Share the unit with others
   You can share the control of the unit by having others install and register to the app. As an administrator, you can add users with the following procedure:

6. Press the configuration icon

7. Press “Shared devices”

8. Press “Add sharing”

9. All users sharing the device will now show in the app

Service

If you need service or to make a warranty claim, you must create a case directly in our support system. Go to the website under SUPPORT. <https ://eeese-aircare.com/support>.

Warranty

Limited warranty

• We guarantee that all parts are free of defects in materials and workmanship for two years from the date of purchase. The warranty covers only material or manufacturing defects that prevent the product from being able to be installed or operated in a normal way. Defective parts will be replaced or repaired.
• The warranty does not cover transportation damage, any use other than what is intended, damage caused by incorrect assembly or improper use, damage caused by impact or other error, or by improper storage.
• The warranty becomes void if the user modifies the product.
• The warranty does not include product-related damage, property damage, or general operational loss.
• The manufacturer’s liability cannot exceed the repair or replacement of defective parts and does not include labor costs to remove and reinstall the defective part, transportation costs to and from the service center, and all other materials necessary to repair.

This warranty does not cover failure or malfunction as a result of the following:

• Lack of proper installation, operation, or maintenance of the unit by our published “User’s Guide” supplied with the unit.
• The workmanship of any installation of the unit.
• Misuse, alteration, accident, fire, flood, lightning strike, rodents, insects, negligence, or unforeseen events.
• Use of non-factory authorized parts or accessories in conjunction with the product.

Limitation of liability

• This is the only warranty provided by the manufacturer. No one is authorized to make any other warranties on our behalf.
• This warranty is instead of all other warranties, expressed or implied, including but not limited to any implied warranty of fitness for a particular purpose and saleability. We expressly disclaim all liability for consequential damage, accidental damage, indirect loss or loss related to a breach of the expressed or implied warranty.
• This warranty gives you specific legal rights, which may vary by country.

Complaints
In the event of any warranty claim a valid purchase receipt must be presented. Read about raising a warranty claim under the SERVICE section.

IMPORTANT!

• If you need technical help – contact our customer service: https://eeese-aircare.com/support.
• We have specialist knowledge of our products and the field in general, so you can get help quickly and easily.

Thank you for choosing this product. Please read this instruction manual before using it.

eeese air care. info@eeese-aircare.com. Web: eeese-aircare.com. MV-2537-08-2024.

References

• aircare.com
• Indoor climate products for a healthier home
• vorbehalten.de - Reservierung, Verfügbarkeit, Buchung, Option, Vormerkung, Vorbehalt, Bestätigung, Stornierung, Rücktritt, Anfrage, Vorbehalten
• Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>