Digtec DTX7D 2 IN 1 Foldable Wireless Charger User Manual
- June 16, 2024
- Digtec
Table of Contents
Digtec DTX7D 2 IN 1 Foldable Wireless Charger
Product Information
Specifications
- Compliance: FCC part 15
- RF Exposure Requirements: Fully compliant with FCC RF Exposure requirements of KDB 447498
- Operating Conditions: A person must be no closer than 20 centimeters from the device surface, except for non-repetitive patterns with transient time intervals in the order of a second
Product Usage Instructions
Important FCC Warning
This device complies with part 15 of the FCC Rules. To ensure proper
operation and prevent harmful interference, please adhere to the following:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Do not make any changes or modifications to the device that are not expressly approved by the party responsible for compliance. Unauthorized modifications may void your authority to operate the equipment.
Troubleshooting Tips
If you experience any interference or undesired operation, please try the
following:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- If the issue persists, consult the dealer or an experienced radio/TV technician for assistance.
FAQ
-
Q: What does FCC compliance mean?
A: FCC compliance means that this device meets the regulations set by the Federal Communications Commission to ensure proper operation and minimize interference with other devices. -
Q: What is RF exposure testing?
A: RF exposure testing refers to the evaluation of radio frequency (RF) emissions from a device to determine if it meets the safety guidelines regarding human exposure to RF radiation. -
Q: Are there any specific distance requirements for using the device?
A: Yes, to fully comply with FCC RF Exposure requirements, ensure that a person is no closer than 20 centimeters from the device surface during typical operating conditions. -
Q: Can I modify the device?
A: No, any changes or modifications not expressly approved by the party responsible for compliance may void your authority to operate the equipment.
Product Specification
- Output: 15W Max+3W
- Input: 5V/3A, 9V/2A
- Interface: Type C
- Dimension: 73.44x 101.03×23.60mm
- Charging Distance: ≤ 5mm
- Material: PC+ABS+Silicone
Product Show
Package Contents:
- 1pcs x Wireless Charger
- 1pcs x User Manual
- 1pcs x Adaptor
- 1pcs x Charging Cable
How to Work
Plug a power adaptor to a wall outlet, and connect the type-c cable to the power adaptor, then place your phone or Samsung Watch on the charging plate to start charging.
Place your phone & Samsung Watch on the charger.
Check the charging icon displayed on the mobile phone’s screen and Watch’s
screen for the charging status.
FEATURE:
- Special designed for Galaxy Z Flip 5/4/3 and other Qi enabled phones & Galaxy Watch 6/5/4 series (3W).
- Charging status:
- Power on: White light for 3s
- Charging: White light is on
- Full Charging: White light is on
- Abnormal: White light flash (1 time/1 second)
Charging modes for reference.
Charging Cautions.
Product-specific safety information
- Place the device on flat surface.
- Keep the device dry.
- Do not attempt to open the device.
- Do not place bank cards near the device.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interence,
- This device must accept any interference received, including interference that may cause undesired operation.
Enjoy Your Wireless Charging!
Made in China
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Any Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>