SEALEY LED100HB LED High Bay Light Instruction Manual

LED100HB LED High Bay Light

“`html

Specifications

• Model No: LED100HB, LED150HB, LED200HB
• Beam Angle:
• Dimensions:
• IP Rating:
• LED Type:
• Lumen Output:
• Nett Weight:
• Nominal Frequency:
• Plug Type:
• Power:

Product Usage Instructions

1. Safety

1.1. Electrical Safety

It is crucial to follow electrical safety guidelines to ensure
safe operation of the high bay light:

• Check all electrical equipment and connections for wear or
  damage before use.

• Use an RCD with all electrical products.

• Inspect power supply cables and plugs regularly.

• Ensure correct voltage rating and fuse in the plug.

• Avoid pulling or carrying the appliance by the power
  cable.

• Do not use worn or damaged cables, plugs, or connectors.

• Suitable for indoor use within specified temperature
  range.

2. Introduction

Introduce the product and its intended purpose.

3. Installation

Follow these steps for the installation of the high bay
light:

1. Ensure the installation base can support 10 times the weight of
   the product.

2. Mount the high bay light at least 6m above the ground.

3. Follow specific installation instructions provided in the
   manual.

4. Environment Protection

Properly dispose of the product and its components in an
environmentally friendly manner:

• Recycle unwanted materials and packaging at a recycling
  center.

• Drain any fluids into approved containers before disposal.

FAQ

Q: Can I replace the light source in the luminaire myself?

A: The light source should only be replaced by the manufacturer,
service agent, or a qualified person.

Q: What should I do if the power cable or plug is damaged?

A: Switch off the electricity supply, remove from use, and have
repairs done by a qualified electrician.

Q: How should I dispose of the product at the end of its

working life?

A: Follow local regulations for disposing of the product in an
environmentally protective way, and consider recycling options.

“`

LED HIGH BAY LIGHT 6000K MODEL NO: LED100HB, LED150HB, LED200HB

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

1.1. ELECTRICAL SAFETY

WARNING! It is the user’s responsibility to check the following:

9

Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs

and all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with

all electrical products.

Electrical safety information. It is important that the following information is read and understood:

9

Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.

9

Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.

Important: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the correct fuse.

8

DO NOT pull or carry the appliance by the power cable.

8

DO NOT pull the plug from the socket by the cable.

8

DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or is replaced immediately

by a qualified electrician.

If the cable or plug is damaged during use, switch off the electricity supply and remove from use.

Ensure that repairs are carried out by a qualified electrician.

9

Suitable for use indoors at -35oC to +50oC.

9

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.

9

The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.

2. INTRODUCTION

Super bright cool white light with 90° beam angle is capable of lighting a large area. Suitable for warehouses, manufacturing facilities or any large space. Highly efficient LED lights are brighter and significantly more energy efficient when compared to traditional incandescent, halogen or fluorescent lights. Robust and rust resistant aluminium body designed to keep the light cool with maximum heat dissipation, prolonging the life of the light. Supplied with an eyelet which can be used to hang the light from a chain, wire or rod. Mounting bracket also available Model No. HBB01 – Universal Bracket for High Bay Lights. Built-in DC Driver provides the optimum electrical input for the light which allows for a 50,000 hour lifespan.

3. SPECIFICATION

MODEL NO: Beam Angle: Dimensions: IP Rating: LED Type: Lumen Output: Nett Weight: Nominal Frequency: Plug Type: Power:

LED100HB 90° 230 x 230 x 85mm IP65 100W SMD LED 15000lm 1.20kg 50Hz Bare Wire 100W

LED150HB 90° 280 x 280 x 90mm IP65 150W SMD LED 22500lm 1.40kg 50Hz Bare Wire 150W

4. INSTALLATION

NOTE: the installation base must be able to support 10 times the weight of the product. High bays must be mounted a minimum of 6m from the ground.

LED200HB 90° 325 x 325 x 90mm IP65 200W SMD LED 30000lm 1.80kg 50Hz Bare Wire 200W

© Jack Sealey Limited

STEP 1
Original Language Version

STEP 2

STEP 3

LED100HB, LED150HB, LED200HB Issue 2 (3) 30/04/24

STEP 4

STEP 5

STEP 6

STEP 7

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

REGISTER YOUR PURCHASE HERE

WEEE REGULATIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500

sales@sealey.co.uk

www.sealey.co.uk

© Jack Sealey Limited

Original Language Version

LED100HB, LED150HB, LED200HB Issue 2 (3) 30/04/24

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>