TCL S5400 40 Inch Smart Android TV Instruction Manual

TCL S5400 40 Inch Smart Android TV

Product Information

Specifications

• Model: TCL Smart TV
• Features: Remote Control, Network Connection, Digital Teletext, Quick Start Function, CEC
• Additional Features: Common Interface, Smart TV Homepage Access

Product Usage Instructions

Introduction

• Precautions: Read all instructions before operating the set. Keep them for future reference.
• Warning: Take precautions to prevent accidents like falls. Use recommended stands or mounting methods. Educate children about safety measures.

Getting Started

• Switching On/Off: Use the power button to switch the TV on and off.
• Network Connection: Connect the TV to a network for online features.
• Initial Setup: Follow on-screen prompts for initial setup.

Basic TV Operations

• Accessing Channels: Use the remote to navigate and select channels.
• Watching Connected Devices: Switch to connected devices like gaming consoles.
• Adjusting Volume: Use the remote or TV buttons to adjust volume.

Using More of Your TV

• Installing Channels: Scan for channels and install them for viewing.
• Common Interface: Explore additional features like common interface options.

Frequently Asked Questions (FAQ)

Q: How do I troubleshoot common issues with the TV?
A: Refer to the “Problems & Solutions” and “Troubleshooting” sections in the manual for guidance on resolving common problems.

Q: Can I use the TV without a network connection?
A: Yes, you can use the TV for basic functions like watching channels even without a network connection. However,some features may require an internet connection.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

Introduction

Precautions
Read all of the instructions before operating the set. Keep these instructions well for future use.

Warning
A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
• ALWAYS use furniture that can safely support the television set.
• ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
• ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
• ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
• NEVER place a television set in an unstable location.
• NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
• NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
• NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.

If the existing television set is being retained and relocated, the same considerations as above should be applied.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that the fuse may be in the neutral, and that the mains shall be disconnected to deenergize the phase conductors.

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded by a skilled person so as to provide some protection against voltage surges and built-up static charges.

Product

• Do not block or cover the ventilation openings on the back cover.
• Do not push objects of any kind into this unit through the cabinet slots as they could touch the current carrying parts or short-circuit parts, resulting in fire, electric shock, or damage to the unit.
• Do not attempt to open the cabinet as this may cause damage. There are no parts inside you can service by yourself. Refer all servicing to qualified personnel.
• Do not touch the screen surface with fingers as this may scratch or mar the TV screen.
• Do not impact the TV screen with hard pressure as this may damage the TV screen severely.

Power and Plug

• Unplug the set under the following conditions:
  • If the set will not be used for a long period of time.
  • If the power cord or the power outlet/plug is damaged.
  • Follow the instructions to install and adjust the product. Adjust those controls that are covered in these operating instructions as improper adjustment of other controls may result in damage. If this happens, unplug the set and refer to the service personnel.
  • If the set is subject to impact or has been dropped and the cabinet has been damaged.
• Where the mains plug or an appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.
  (*Where an all-pole mains switch is used as the disconnect device, the switch shall remain readily operable.)

Power Cord and Signal Cable

• Do not allow anything to rest on or roll over the power cord and the signal cable.
• Protect the power cord and the signal cable from being trampled.
• Do not overload the power cord or the power outlet.
• Do not expose the power cord and the signal cable to moisture.

Use Environment

• Do not place the set on an unstable cart, stand, or table.
• Place the set on a place that allows good ventilation.
• Do not use the set near damp, and cold areas.
• Do not expose the set to excessive heat such as direct sunlight, fire, or the like and no naked flame sources, such as lighted candles, should be placed on the apparatus.
• Do not expose the set to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• Do not use the set in dusty environments.
• Operating Temperature: 5°C to 35°C (41°F to 95°F) Operating Humidity: 20% to 80%, non-condensing Storage Temperature: -15°C to 45°C (5°F to 113°F) Storage Humidity: 10% to 90%, non-condensing

Cleaning

• Dust the set by wiping the screen and the cabinet with a soft, clean cloth or some special liquid cleaner.
• Do not apply excessive force to the screen when cleaning.
• Do not use water or other chemical cleaner to clean the screen as this may damage the surface of the TV screen.

All other safety instructions about our TV sets are also applicable here. (Note: Certain TV model is not designed to be mounted to the wall.)

Sockets

Note: The location and names of the sockets on the TV may vary according to TV model, and not all sockets available on all models.

LAN
This socket can be used to connect to external modem or network access equipment.

Digital audio out (Optical) socket (output)
This socket can be used to connect a compatible digital audio receiver.

HDMI (Service port) or HDMI(ARC) socket (input)
The HDMI (High-Definition Multimedia Interface) socket can be used to connect a Blu-ray player, PC with a compatible video card installed, certain DVD players or a high-definition compatible digital satellite decoder. This socket provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable.

USB2.0 socket (input)
This socket can be used to connect a USB device.
Note: The number of USB sockets on the TV may vary according to TV model.

Antenna/Cable input socket
This socket can be used to connect the outside aerial or cable network.

AV adapter socket
The socket can be used to connect the attached AV adapter cable with VIDEO and AUDIO L & R IN sockets. The AV IN sockets can be used to connect a range of equipment, including video recorders, camcorders, decoders, satellite receivers, DVD players, or games consoles.

Headphone socket (output)
This socket can be used to connect headphones or stereo earphones.
Warning: Excessive sound pressure from earphones and headphones can cause hearing loss.

Satellite input socket
This socket can be used to connect a coaxial cable to receive the signal from your satellite receiver.

Common interface socket
This slot can be used to watch encrypted digital TV channels by inserting a CAM(Conditional Access Module) along with a smart card provided by a digital TV service operator.

Remote Control Functions
Most of your television’s functions are available via the menus that appear on the screen. The remote control(s) supplied with your set can be used to navigate through the menus and to configure all the general settings.

Notes:

1. Figures and illustrations in this operation manual are provided for reference only and may differ from actual product appearance.
2. The remote control type may be changed without notice, please refer to the remote control attached with your TV.
3. Certain function may not be available for some models.
4. The Google Assistant is not available in certain languages and countries.

Google and Android TV are trademarks of Google LLC.

Notes:

1. Certain function may be accessed from the virtual remote control keyboard only, please press button on the remote to display it and operate accordingly.
2. The App buttons may differ depending on the model. The App button is used for accessing the corresponding App.
3. The Google Assistant is not available in certain languages and countries.

How to Use the Remote Control

• Before using the Google Assistant button, you must finish pairing the remote with the TV first.
• This Google Assistant function is only available for content search from certain apps.
• Set languages in the (Settings) > Device Preferences > Language under smart TV homepage to your local language or official language to enhance voice search successfully.

Installing Batteries

1. Push to open the back cover as illustrated.
2. Insert two AAA batteries according to the polarities marked on the battery case.
3. Replace the back cover as illustrated.

Getting Started

Switching On
Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the channel set-up procedure.

1. Insert two AAA batteries in the remote control.
   Precautions on using batteries:

   • Only use the battery types specified.
   • Make sure you use the correct polarity.
   • Do not mix new and used batteries.
   • Do not use rechargeable batteries.
   • Do not expose batteries to excessive heat such as sunshine, fire or the like, throw them in a fire, recharge them or try to open them, as this could cause them to leak or explode.
   • Remove the batteries from the remote control if you are not using it for a long period of time.
   • Attention should be drawn to the environmental aspects of battery disposal.

2. Connect the power cable FIRST to the television, THEN to a mains socket.
   Note: If the power cable is connected to the television, please only connect the power cable to the mains socket.
   Your TV set should only be connected to an AC supply. It must not be connected to a DC supply. If the plug is detached from the ca-ble, do not, under any circumstances, connect it to a mains socket, as there is a risk of electric shock.
   Note: The figures are for representation only, the location of power socket of the television may differ depending on the model.

3. Connect an outside aerial to the ANTENNA/CABLE IN socket at the back of the TV set.
   The aerial socket (75 OHM – VHF / UHF / cable) can be used for connecting an external aerial or other equipment fitted.
   Notes:

   • If you want to receive the signal from your cable or cable box, please connect a coaxial cable to the Antenna/Cable input socket at the back of the TV set.
   • If you want to receive the signal from your satellite receiver, please connect a coaxial cable to the Satellite input socket at the back of the TV set.

4. When powered on, the TV will be turned on directly or be in standby mode.
   If the power indicator lights up, the TV set is in standby mode. Press the button on the remote control or on the TV set to turn on the TV.

Switching Off

• To put the TV set into standby mode, press the button on the remote control. The TV set remains powered up, but with low energy consumption.
• To switch off the TV set, unplug the mains socket from the mains outlet.

Network Connection

Your TV will require an internet connection to operate all functions. Data usage charges may apply.
Please refer to your Internet Service Provider (ISP) for additional information.

To access the Internet, you must subscribe to high speed broadband Internet service with your Internet service provider (ISP).

Your TV can be connected to your home network in two ways:

• Wired, using the RJ45 (LAN) connector on the back panel.
• Wireless, using the internal wireless and your home wireless network.

Note: Instructions below are just the usual ways to connect your TV to the wired or wireless network. The connection method may be different depending on your actual network configuration. If you have any questions about your home network, please refer to your ISP.

Connecting to a Wired Network
To connect to a wired network:

1. Ensure you have:
   • An Ethernet cable long enough to reach your TV
   • A router or modem with an available Ethernet port
   • A high-speed Internet connection
   • An Ethernet (LAN) port on the back of the TV
2. Connect your Ethernet cable to the router and to the Ethernet port on the back of the TV.
3. Use the Network & Internet menu to configure the TV.

Connecting to a Wireless Network
To connect to a wireless network:

1. Ensure you have:
   • A router broadcasting a high-speed wireless signal
   • A high-speed Internet connection
2. Use the Network & Internet menu to configure the TV.

Note: Please follow below steps to enter the Network & Internet menu.

1. Press on the remote control. The Smart TV homepage is displayed.
2. Press Up/Right to move the cursor to (Settings) on the right top of the screen and press OK to enter.
3. Press Up/Down to select Network & Internet, then press OK to enter the submenu and follow the on-screen guidance to set up your network.

TV Buttons

Power button
If the batteries in your remote control are run down, you can use the button on your TV set.
The model has only one button. It may work just as Standby/Quit standby button, or as a multi-function controller.

You can turn on the TV by pressing the button on the TV set.
While the TV is on, press the button to display the multi-function menu. More information about how to use the multi-function menu, please refer to the figure below.

• Press to move the highlight to the next function selection
• Press and hold the button for more than 2 seconds to confirm your selection.

Note:
You can follow the on-screen guide to operate. Figures and illustrations are provided for reference only and may vary depending on the model.

Initial Setup
The first time you switch the set on, the Welcome wizard appears, which guides you through the initial setup process. Follow the on-screen instructions to finish the initial setup process such as selecting the language, pairing your remote, connecting to the network, and more. During each step, either make a choice or skip the step. If you skip a step, you can perform the setup later from the settings menu.

Note: When you pair your remote, keep the remote control and TV in 1 meter, and follow the on-screen guide for pairing. After finishing pairing the remote, you can use the Google Assistant button. If you skip remote pairing, you will be promted to pair the remote with the TV again when you use the Google Assistant button for the first time.

Basic TV Operations

Accessing Channels

• Using the Navigation Direction buttons: press Up/Down on the Circular D-Pad of the remote control to scroll through the channels.
• Using the OK button: press the OK button to display the channel list and press Up/Down/Left/Right and OK to select channels.
• Using the P+/P- buttons: press the P+/P- buttons on the remote control to scroll through the channels.
• Using the button: press to display the virtual remote control keyboard, then you can use the numeric buttons, or the List button to operate accordingly.

Watching Connected Devices
Press on the remote control to display the source list. Press Up/Down to select TV or other input sources and press OK to confirm.
You can also press on the remote control to display the homepage, press Up/Left/Right to move the cursor to the (Inputs) area on the right top of the screen,and press OK to enter. Then press Up/Down and OK to select the input source.

Adjusting Volume

• Volume control: press the +/- buttons on the remote control to increase or decrease the volume.
• Sound mute: press the button to temporarily mute the sound. Press this button again or the button to restore the sound.

Accessing Smart TV Homepage
Allows you to enjoy Internet Applications (apps) and specially adapted Internet websites, and perform advanced system settings for your TV. You can make controlling with the TV remote control.

WARNING:

• Configure the network settings before using Smart TV applications.
• Slow responses and/or interruptions may occur, depending on your network conditions.
• If you experience a problem using an application, please contact the content provider.
• According to circumstances of the content provider, an application’s updates or the application itself may be discontinued.
• Depending on your country’s regulations, some applications may have limited service or not be supported.
• Changes in application content may be made without prior notice by the service provider.
  1. Press on the remote control to display the Smart TV homepage.
  2. Press Up/Down/Left/Right and OK to enter the desired apps, functions or settings.
  3. Press to return to previous interface.
  4. To exit the homepage, press Up/Left/Right to move the cursor to the (Inputs) area on the right top of the screen, press OK to enter and then press Up/Down and OK to select your desired input source.
     Note: Since the connection with Internet takes time, it’s recommended that you wait a few minutes to use the Smart TV feature after activation of TV from standby.

Accessing TCL Channel
Allows you to enjoy recommended contents.

1. Press on the remote control to display the Smart TV homepage.
2. Press Up/Down/Left/Right to select Apps > TCL Channel, and press OK to enter.
3. Press or to exit.
   Note: You can also press , if available on the remote control, to access recommended contents directly.

Using Advanced System Settings Menu
Allows you to not only adjust device settings, such as Network, Inputs, Google Cast, Power and Apps, etc.,but also set preferences.

1. Press on the remote control to display the Smart TV homepage.
2. Press Up/Right to move the cursor to (Settings) on the right top of the screen and press OK to enter the advanced system settings.
3. Press Up/Down to choose the items and press OK to enter.
4. Press to return to previous interface.

Using TV Settings Menu
The following instructions introduce how to operate and access the Options menu of the TV under TV mode with the remote control.

Note: Some of the functions might be unavailable in certain input sources. And for some models, certain options are not available.

To access the menu system:

1. Press on the remote control to display the Options menu.
2. Press Up/Down to select the desired item, then press OK/Right to enter the corresponding submenu.
3. In submenus, press Up/Down to select menu options, then press OK/Right to enter the option list or the corresponding submenu, or press OK to toggle on or off, or press Left/Right to adjust the settings.
4. Press to return to previous interface.

Using More of Your TV

Installing Channels
This section describes how to search and store channels automatically. This may be done in either of the cases below:

• you are prompted that there are no channels in TV mode;

• you want to update your channels.

  1. In TV mode, press on the remote control and select Channel > Channel scan. Press OK/Right to enter.

  2. The TV installs and arranges channels according to your country or region. Press Up/Down to select Country/Region, and press OK/Right to enter.
     Enter the default password 1234 or your own password in case you have changed the password in the System > TV Lock menu. Press Up/Down to select your country or region and press OK to confirm.

  3. Press Up/Down to select Automatic search and press OK/Right to enter.

  4. Press Up/Down to select Tuner mode and press Left/Right to select Cable , Antenna or Satellite.
     (Note: Satellite option is available only in selected models.)

  5. Press Up/Down to select other options and use Left/Right to configure.

  6. After configuration is completed, press Down to select Search and press OK to start scanning channels.

  7. The channel search may take a few minutes. After the automatic search, channels are arranged in a preset order. If you wish to hide, edit or delete channels, press on the remote control, select Channel > Channel organizer and press OK/Right to enter.
     Note: If the channel search retrieved only the analog channels it could be caused by poor broadcasting and therefore is not covered by manufacturer warranty. Manufacturers cannot be held responsible for lack of or poor broadcasting in some areas.

Common Interface
(* not available for some models)
Encrypted digital TV channels can be decoded with a Conditional Access Module (CAM) and a card provided by a digital TV service operator.
The CAM may enable several digital services,depending on the operator and services you choose (for example, pay TV). Contact your digital TV service operator for more information about services and terms.

Using the Common Interface Function

WARNING: Switch off your TV before inserting a CAM. Be sure to follow the instructions described below. Wrong insertion of a CAM may damage both the module and your TV.

1. Following the directions printed on the CAM, gently insert the module into the common interface slot on the TV.
2. Push the module in as far as it will go.
3. Turn on the TV and wait for the common interface function to be activated. This may take several minutes.
   Note: Do not remove the CAM from the slot. Removing the module will deactivate the digital services.

Accessing Common Interface Services
After inserting and activating the CAM, press on the remote control, select Channel > Common interface and press OK/Right to enter.
This menu option is only available if the CAM is correctly inserted and activated. On-screen applications and content are provided by your digital TV service operator.

Note: This feature is only available under DTV source.

Using Subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-T2/DVB-C/DVB-S/DVB-S2 digital broadcasts. With digital broadcasts, you have the additional option of selecting a preferred subtitle language.

Note: Some options are availebale only when Subtitle is set to on.

1. Turning On/Off Subtitles
   Press on the remote control, select Channel > Subtitle and press OK/Right to enter.

2. Select the Subtitle option, press OK to toggle between on and off.

3. Press to return to previous interface.

Enabling Subtitle Languages on Digital TV Channels

1. Press on the remote control, select Channel > Subtitle > Digital subtitle language 1st and press OK/Right to enter.
2. Press Up/Down to select a subtitle language as your preferred language and press OK to confirm.
3. Press Up/Down to select Digital subtitle language 2nd and press OK/Right to enter.
4. Press Up/Down to select a secondary subtitle language and press OK to confirm.
5. Press to return to previous interface.

Selecting a Subtitle Type on Digital TV Channels

1. Press on the remote control, select Channel >Subtitle > Subtitle type and press OK/Right to enter.
2. Press Up/Down to select a subtitle type and press OK to confirm. You can select Hearing impaired to display the hearing impaired subtitles with your selected language.
3. Press to return to previous interface.

Using Teletext

Selecting Decoding Page Language

1. Press on the remote control, select Channel > Teletext > Decoding page language and press OK/Right to enter.

2. Press Up/Down to select a proper type of language in which Teletext will display and press OK to confirm.

3. Press to return to previous interface.

4. Digital Teletext Language
   On digital TV channels, depending on the broadcaster,you may be able to enjoy a service with multiple initial Teletext pages in different languages. This function allows you to select an available language as primary language, which relates to different initial Teletext pages.

5. Press on the remote control, select Channel >Teletext > Digital teletext language and press OK/Right to enter.

6. Press Up/Down to select a language and press OK to confirm.

7. Press to return to previous interface.

Using Quick Start Function
It enables you to turn on your TV faster from standby mode than turning this function off, but it will also increase standby power consumption .

1. Press on the remote control to display the homepage. Press Up/Right to select (Settings) > Device Preferences > Quick start > Enable quick start and press OK to toggle between on or off.
2. Press to return to previous interface.

Network Wake Up
This function allows you to turn on your TV from standby mode via a network. To use this function, please make sure:

1. Your TV is connected to an effective wireless home network;
2. The desired controller, such as a smartphone, is connected to the same network as your TV;
3. An app which supports network waking up function, such as YouTube, has been installed into the controller;
4. Networked standby is set to on in the Network & Internet menu under homepage. Press , select (Settings) > Network & Internet, use Down to select Networked standby and press OK to activate it.
   When the TV is in networked standby mode, you can use the App to wake up the TV remotely.

Notes:

• This feature is disabled if you press and hold the button on the remote control and confirm to shut the TV down.
• Before using the feature of network wake up, make sure > (Settings) > Device Preferences > Quick start > Enable quick start is set to on.

Consumer Electronic Control(CEC)
Use this function to search for CEC devices connected to the HDMI sockets in your TV and enable auto power on and auto standby between the TV and CEC devices.

Enabling or Disabling CEC

1. Press on the remote control, select System > Consumer Electronic Control(CEC) and press OK/Right to enter.
2. Select the HDMI Control option, and press OK to toggle between on or off.
3. Press to return to previous interface.

Using Auto Power On
Enables the TV to automatically power on when you power on a CEC device (e.g. DVD) with the device’s remote. Press OK to turn it on to enable this function.

Using Auto Standby
Enables all CEC devices to automatically go to the standby mode when you turn off the TV with the TV remote. Press OK to turn it on to enable this function.

Note: The CEC functions depend on the devices connected and it is possible that some devices may not interoperate correctly when connected to this TV. The user manual or the manufacturer of the problematic devices should be consulted for further information.

Using EPG (Electronic Programme Guide)
EPG is an on-screen guide that displays scheduled digital TV programmes. You can navigate, select and view programmes.

1. Press on the remote control, select Channel >EPG and press OK/Right to enter. The Programme Guide menu will appear, which allows you to get information about the current or next programme playing on each channel. Navigate through the different programmes using the Up/Down/Left/Right buttons on the remote control.

2. Use the related buttons shown at the bottom of the screen to view EPG.

   • Programme filter: Programme guide filter for digital TV programmes.
   • Press to display the type list of the programme.
   • Navigate through the different types using the Up/Down buttons on the remote control.
   • Select one or more types, which you want to highlight from the type list, press OK to select or deselect. A checkmark will appear to the right of the type when selected.
   • Custom schedule: Press Up/Down to select a programme, then press the RED button to set the schedule, press OK to enter Schedule reminder.
   • Select date: Press the GREEN button to select date.
   • Schedule list: Press the YELLOW button to view your schedule list.
     Note: To access the color buttons, you need to press button on the remote control to display the virtual remote control keyboard first.

3. Press to exit EPG.

Bluetooth Function
(* not available for some models)
Bluetooth® is a wireless technology standard for exchanging data over short distance between Bluetooth devices. You can connect Bluetooth audio device,mouse or keyboard via the TV.

1. Press on the remote control to display the homepage, press Up/Right to select (Settings) > Remotes & Accessories and press OK to enter.

2. Select Add accessory and press OK to enter.
   The TV will search nearby Bluetooth devices automatically.

3. Select an available device, press OK and follow the guides on the screen to connect it.
   Note: Bluetooth technology (if available in your TV) uses 2.4GHz frequency thus close proximity to WiFi access points, routers or microwave ovens might interfere with Bluetooth audio streaming. If you face interruptions in audio reception, you should restart your Bluetooth device to find frequency with less interferences and if you continue to face issues you should move closer to TV or increase space between TV and source of interferences.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TTE Corporation is under license.
Other trademarks and trade names are those of their respective owners.

Reset Shop
Allows you to reset the TV to factory default settings.

1. Press on the remote control to display the homepage. Press Up/Right to select (Settings) > Device Preferences > Reset and press OK to enter.
2. Press Up/Down to select Factory data reset and press OK to enter. Then select Erase everything and press OK to confirm.
3. Enter 1234 or the PIN according to the on-screen prompt.
4. Select OK and press OK to confirm.
5. The Initial setup wizard appears. Follow the instructions in the section Initial setup.

Netflix Settings
Netflix provides on-demand movies and TV shows delivered via the Internet. Netflix is available in certain countries.Unlimited membership is required. More information can be found at www.netflix.com <http://www.netflix.com/>.

Note: You can directly access Netflix via clicking the NETFLIX button on the remote control.

Password in Parental Control

• The default password is 1234. You can change it to a new one.
• The super password is 0423. If you forget your code,enter the super password to override any existing codes.

Other Information

Problems & Solutions

Note: Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected TV models can disregard them.

1. Fail to link to the network.

   • Check if your TV is connected with the network;

   • Reboot your TV;

   • Consult your internet service provider, to confirm if access of your router is supported. Refer to the operation manual of your router, and activate its DHCP function after linking the network to your TV.

   • Make sure your TV is connected to a router, and make sure your router is powered on. Check that your router/modem has an internet connection, and that your Ethernet cables/wireless connection is OK.
     Test your connection with a computer to make sure it is OK. Should the problem persist, contact customer service.

   • Check if TV system time is correct or not. Sometimes TV system time is synchronized to the wrong time from abnormal broadcast signal. In this case, please set system time manually.

2. The video could not be played smoothly.

   • Videos from your USB flash drive — It may be caused by abnormal data transmission, or its code rate is far beyond the supported formats of this TV set.
   • Videos downloaded from internet, or online videos.
   • It may be caused by the lower bandwidth of your network. A high network speed is required to handle online videos.
   • Peak internet usage times may affect the bandwidth.
   • Check if any other computers on the same network are also operating, as they may be using up bandwidth. Especially if they are downloading or playing online videos.
   • The video may not be smooth itself, it is not the problem of your TV or network.

3. When two portable hard drives are connected with the TV at the same time, they will not be recognized sometimes.

   • All portable hard drives consume a lot of power,which may result in power supply problems. We recommend inserting only one hard drive, or a low power consumption portable hard drive.

4. The video from a portable hard drive (USB) is playing with no sound.

   • The audio format of the video in your portable hard drive is not supported by the TV player.

5. Some videos fail to play.

   • The formats of the videos may not be supported by the TV, especially videos shot by certain kinds of cameras, generally with their private protocol of formats, which are not compatible with your TV.

6. Video stops playing midway.

   • Mistakes may occur when videos are copied or compressed, so they may automatically stop playing during playback.

7. What should I pay attention to, when I do software updating?

   • No power cuts when software updating;
   • Avoid any operations with your remote control when software updating;
   • Depending on your internet connection speed, the software updating process may take some time.

8. There are no distinct changes of TV interface after software updating.

   • Under certain conditions, software updating may not only update or add new functions but also improve the performance of the TV set, without distinct changes of interface. Also, there may be no changes to the user interface at all.

9. What should I do when software updating process stops due to a sudden power-off?

   • If you do software updating by USB, do not pluck the USB drive from your TV, and restart your TV to continue software updating; If you do software updating by Network, also restart your TV and check if it is functioning correctly.

10. With a USB device being inserted into the TV in advance, I am prompted that no USB devices are detected after I access Media, why?

    • There may be something wrong with your portable hard drive(s), damaged or with low voltage. It’s recommended to provide an additional power supply to the hard drive(s).

11. External device cannot be recognized.

    • Some external devices (e.g. webcam, smart phone,tablet, game handle, and external wireless adapter) may not be compatible with the TV and cannot be supported for certain functions (wireless display,gesture control, face recognition, if any). Please try a similar device. If it does not work, contact your local dealer.

12. Voice search does not work.

    • Check if your remote control has been successfully paired with your TV.
    • Check if the language setting is correct.
    • Check if Google server is available and stable.

Troubleshooting

Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.

No picture, no sound

1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make sure it is working or turned on.
3. Power plug is in a bad contact with the outlet.
4. Check the signal source.

No color

1. Change the color system.
2. Adjust the saturation.
3. Try another channel. Black-white programme may be received.

Remote control does not work

1. Change the batteries.
2. Batteries are not installed correctly.

No picture, normal sound

1. Adjust the brightness and contrast.
2. Broadcasting failure may happen.

Normal picture, no sound

1. Press the button to increase volume.
2. Volume is set to mute, press the button to restore sound.
3. Change the sound system.
4. Broadcasting failure may happen.

Unorderly ripples on the picture
It is usually caused by local interference, such as cars,daylight lamps and hair driers. Adjust the antenna to minimize the interference.

Snowy dots and interference
If the antenna is located in the fringe area of a television signal where the signal is weak, the picture may be marred by dots. When the signal is extremely weak, it may be necessary to install a special antenna to improve the reception.

1. Adjust the position and orientation of the indoor/outdoor antenna.
2. Check the connection of antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may happen.

Ignition
Black spots or horizontal streaks appear, or the picture flutters or drifts. This is usually caused by interference from car ignition system, neon lamps, electric drills, or other electrical appliance.

Ghost
Ghosts are caused by the television signal following two paths. One is the direct path, the other is reflected from tall buildings, hills, or other objects. Changing the direction or position of the antenna may improve the reception.

Radio frequency interference
This interference produces moving ripples or diagonal streaks, and in some case, loss of contrast in the picture. Find out and remove the radio interference source.
To bring you better visual experience, please remove all labels from TV front panel and screen before use.

Other Information

Legal Statement
[Legal Statement] of TCL – manufacturer of this TV set Due to the various capabilities of products featuring the SmartTV – Services, as well as limitations in the available content, certain features, applications, and services may not be available on all devices or in all territories. Some features on SmartTV may also require additional peripheral devices or membership fees that are sold separately. Please visit our website for more information on specific device information and content availability. The services and availability of content through SmartTV are subject to change from time to time without prior notice.

All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services displayed through this device.

You expressly acknowledge and agree that use of the device is at your sole risk and that the entire risk as to satisfactory quality, performance and accuracy is with you. The device and all third party content and services are provided “as is” without warranty of any kind, either express or implied. TCL expressly disclaims all warranties and conditions with respect to the device and any content and services, either express or, implied, including but not limited to, warranties of merchantability,of satisfactory quality, fitness for a particular purpose, of accuracy, of quiet enjoyment, and non-infringement of third party rights. TCL does not guarantee the accuracy, validity, timeliness, legality, or completeness of any content or service made available through this device and does not warrant that the device, content or services will meet your requirements, or that operation of the device or services will be uninterrupted or error-free. Under no circumstances, including negligence, shall TCL be liable, whether in contract or tort, for any direct, indirect, incidental, special or consequential damages, attorney fees, expenses, or any other damages arising out of, or in connection with, any information contained in, or as a result of the use of the device, or any content or service accessed by you or any third party, even if advised of the possibility of such damages.

Third party services may be changed, suspended, removed, terminated or interrupted, or access may be disabled at any time, without notice, and TCL makes no representation or warranty that any content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which TCL has no control. Without limiting the generality of this disclaimer, TCL expressly disclaims any responsibility or liability for any change, interruption, disabling, removal of or suspension of any content or service made available through this device. TCL may impose limits on the use of or access to certain services or content, in any case and without notice or liability. TCL is neither responsible nor liable for customer service related to the content and services. Any question or request for service relating to the content or services should be made directly to the respective content and service providers.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio,and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

References

• Netflix
• Netflix

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>