Beser A33 Wireless Car Charger User Manual

Beser A33 Wireless Car Charger

Product Information

Specifications

• Model: MagSafe Case
• Compatibility: iPhone 12/13/14/15/16
• Charging Type: Wireless
• Manufacturer: Rongyichuang (Shenzhen) Technology Co., Ltd
• Country of Origin: China

Product Usage Instructions

Attaching the MagSafe Case
To securely attach your MagSafe Case to your iPhone, follow these steps:

1. Ensure your iPhone is clean and free of any dust or debris.
2. Align the MagSafe Case with the back of your iPhone.
3. Press the case gently onto the back of the iPhone until it securely attaches magnetically.

Charging with the MagSafe Case
To charge your iPhone using the MagSafe Case, follow these guidelines:

• Use an official MagSafe Charger or a compatible third-party MagSafe Charger for optimal charging performance.
• Avoid using low-power chargers as they may result in slower charging speeds.
• Ensure the MagSafe Case is properly aligned with the charger to enable fast charging.

FAQs

Q: What should I do if my MagSafe Case is not attaching securely?

A: Make sure both the case and the iPhone are clean and free of any obstructions. Try repositioning the case until it securely attaches.

Q: Can I use any wireless charger with the MagSafe Case?

A: It is recommended to use a MagSafe-compatible charger for optimal performance, such as an official MagSafe Charger or a third-party MagSafe Charger.

Q: Is the MagSafe Case environmentally friendly?

A: The product is designed to be recyclable. Please dispose of it properly at an electronic waste collection point.

How to Keep Your Phone Securely Attached

How to charge Properly

Indicator Light Guide

If an error is detected

1. Check that your phone supports wireless charging and does not have any credit cards, stands, or other metal attachments on the back (other than the magnetic ring).
2. After checking the above, unplug and plug in the charging cable again to resume normal charging.

Important Reminders

1. Compatible with MagSafe-enabled iPhones and cases.
2. This charger supports an input of 9V=2A and outputs a maximum of 15W.
3. Only use the cable provided with the charger. An Apple cable or other third-party cable may interfere with charging.
4. This charger requires a charging adapter that supports OC or PD fast charging and an output of at least 18W.
5. The charger must be plugged into the power supply to charge devices.

Safety Warnings

1. Do not place the device in temperatures below 0°C (32°F) or above 60°C (140°F).
2. Do not attempt to disassemble the device, expose it to an open flame, or submerge it in water to avoid damaging the device.
3. Always check for damage to the device, cables, or other accessories before using the device. If damaged, do not use the device.
4. Do not attempt to disassemble or modify the device in any way, as it may cause serious damage and void the warranty.
5. Do not expose the device to extremely hot, humid, or corrosive environments to avoid damaging the device.

FCC STATEMENT

• FCCID: 2BFDK-A33

This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCc Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator &your body.

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

This product is intended for use within Europe. Electronic Silk Road Corp. hereby declares that this product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU,2014/35/EU,2014/30/EU

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator &your body.

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

• Manufacture: Rongyichuang (Shenzhen) Technology Co., Ltd

• Add: longgang qu bantianjiedao wankechengshequ xintianxia bairuidadasha A zuo 7F755 shenzhen guangdong.

• Tel: +8613243899821

• Email: rongyichuang@outlook.com.

• EU/REP

  • CET PRODUCT SERVICE SP. Z 0.0. Ul. Dluga 33 102 Zgierz 95-100 Polen
  • Tel: +4971416432236
  • Email: info@cetproduct.com

• UK/REP

  • CET Product Service Ltd.
    Beacon House Stokenchurch Business Park, Ibstone Rd, Stokenchurch High Wycombe HP14 3FE UK

  • Tel: +44741932526

  • Email: info@cetproduct.com

• US/REP

  • SUN BEYOND CONSULTING LTD
    OFFICE NO.448,4TH FLOOR,90 CANAL STREET, BOSTON, MA 02114

  • mrsunbeyond@gmail.com

  • +1(508)4700660

• www.beservip.com

• beservip@outlook.com.

It’s All About Long Term

beservip@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>