SACKit Intelligent Lamp User Manual
- June 13, 2024
- SACKit
Table of Contents
SACKit Intelligent Lamp
Product Information
The SACKit Lamp Intelligent is a battery-powered lamp that offers adjustable light temperature and brightness. It comes with a magnetic charger cable and a quick start guide. The lamp can be controlled using the SACKit Light app, which allows you to adjust, group, and operate up to 99 lamps. The app is available for download on the Apple App Store and Google Play.
Technical Specifications
- Lamp Shade: Adjustable
- Charging Zone: Magnetic
- App Compatibility: SACKit Light
- Model: SACKit Lamp Intelligent
- Bluetooth version: 5.0
- Max brightness: 120 lumens
- Light adjustment: 5 modes
- Battery: 2.600 mAh
- Battery time: 14 hours at 80% lumen
- Dimensions: 11,6 x 9 cm
- Waterproof level: IP67
- Operating temperature: -20oC to 60oC
- Charging temperature: 10oC to 45oC
Contact your SACKit dealer if you experience problems and the lamp does not work. Never attempt to repair the lamp yourself.
Important Safety Information **
**
Please read the manual carefully before using the lamp to ensure safe and
responsible usage. The manufacturer is not responsible for any personal injury
or product damage caused by incorrect or irresponsible use of the product.
Please read and follow the following instructions to ensure that you use the
SACKit Lamp Intelligent safely and correctly. Product damage caused by use
contrary to the following information is not covered by the warranty.
Warning
To prevent any fires or electrical hazards please act according to the
following guidelines:
- Do not disassemble or replace any parts of this device. Please contact professional maintenance or a qualified service center if there is any damage to the device.
- Before the product is connected to a power supply socket, please ensure that the voltage of the power supply and the lamp matches. If the voltage does not match, do not connect the battery pack to the power socket.
- Never charge the battery pack in or near water!
- Do not place the lamp too close to excessive heat or fire (such as a fireplace). However, the lamp can withstand up to 60 ° C and can withstand direct sunlight.
- The operating temperature of the lamp is between -20°C to 60°C.
- The charging temperature of the lamp should be between 10 °C to 45 °C.
- This lamp is IP67 tight. This means it is dustproof and that it can be placed fully under water for a short period of time.
Disposal of the Product
Properly dispose of the product according to local regulations for
electronic waste disposal.
SACKit Lamp Intelligent is made from recyclable and high-quality materials. Do
not dispose of the lamp together with other living garbage. Please understand
the local guidelines for the disposal of electronics containing batteries.
Correct disposal of the lamp will help to prevent negative consequences for
the environment and health.
Product Usage Instructions
Quick Start Guide
- Charge the lamp for a minimum of 6 hours.
- To turn on the light, press the top and hold for 1 second.
- Toggle through three levels of brightness.
- Download the SACKit Light application for more functions.
- Enjoy the moment with the pleasant light.
5 clicks in total from the time you turn on the light until you turn it off
again.
NOTE: Turn off the lamp after use to extend battery life.
Note: To turn off the lamp, perform 5 clicks in total from the time you
turned it on. Turning off the lamp after use will help extend the battery
life.
SACKit Light App
The SACKit Light app allows you to adjust light temperature and brightness
on each individual lamp or group. To operate the lamps using the app, at least
one lamp needs to be 10-25 meters away from your phone. The same distance
requirement applies for lamps to stay connected with each other.
THANK YOU!
Thank you for purchasing this SACKit Lamp intelligent battery-powered lamp.
Please read this manual carefully before using your new lamp. We do not take
responsibility for personal injury or product damage caused by incorrect or
irresponsible use of the product. If you experience technical problems, you
can contact our customer service at info@sackit.dk.
We hope you will enjoy your new SACKit Lamp intelligent.
Enlight the best moments!
BOX CONTENTS
- 1 x SACKit Lamp Intelligent
- 1 x Magnetic charger cable (adapter not included)
- 1 x Quick start guide
PRODUCT OVERVIEW
SACKit Light App
The SACKit Light app lets you adjust, group and operate up to 99 SACKit lamps.
The app lets you adjust light temperature and brightness on each individual
lamp or group. The app can be downloaded on Apple App Store or Google Play.
NOTE:
To operate the lamps, at least one of them needs to be 10 – 25 meters from
your phone (depending on the opstacles between them). The same goes for the
rest of the lamps, that needs to be 10 – 25 meters from another lamp to stay
connected.
HOW TO USE SACKIT LAMP INTELLIGENT
Reset Mode:
If you experience trouble with a lamp you can reset it by putting it into
Reset Mode. This is done by first turning off the lamp. Then press and hold
down the button for 10 seconds until the light starts flashing. Release the
button and the lamp is now reset.
Deep Sleep Mode:
When the lamp is turned off, it still uses a little power to search for your
app. If you want to turn off the lamp completely to avoid using any power, it
must be put into Deep Sleep Mode. This is done by first turning on the lamp.
Then press and hold down the button for 15 seconds until the light starts
flashing. Release the button and the lamp is now in Deep Sleep Mode.
NOTE:
You cannot use the app to turn on a lamp that is put into Deep Sleep Mode.
Saved Brightness:
When the lamp is on, you can set your own brightness at any time by pressing
and holding the ‘Power button’. When you hold down the button, the brightness
will change and either go towards a brighter or dimmer light. When you release
the button, this brightness will be saved as; ’Saved brightness’. This setting
will always be the first brightness at which the lamp is turned on.
NOTE:
You can only save one brightness at a time.
HOW TO CHARGE SACKIT LAMP INTELLIGENT
You charge the lamp by placing the magnetic end of the included USB cable on the charging area (B).
NOTE:
- As a minimum you need to use an USB adapter with the following output: 5V/2A.
- The lamp is fully charge in 6 hours .
CHARGING SACKIT LAMP
The lamp is charged through the area (B). The LED (C) on the lamp will light
red when charging and green when fully charged.
TROUBLESHOOTING
If you have trouble operating your SACKit Lamp Intelligent, please try the following solutions. If the following solutions do not solve your problem, please contact our customer service at info@sackit.dk for further support.
There is no light when I turn on my SACKit Lamp Intelligent
- Please check if the lamp has run out of power. If the lamp has run out, charge the battery pack for about 6 hours for a full charge.
I cannot charge/turn on my SACKit Lamp Intelligent
- Please make sure that the adapter and the charging cable is connected correctly. Please check the power adapter voltage and current demand.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>