InHand Networks ODU2000 Cloud-Managed 5G Outdoor Unit Edge Routers Installation Guide

: June 12, 2024
: InHand Networks

Table of Contents

Overview
Packing list
Panel Introduction
Equipment Installation
Access to Internet
- Wired Networking
Remote Manage Platform
Quick User Guide
LED Status Reference
Customers Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

InHand Networks ODU2000 Cloud-Managed 5G Outdoor Unit Edge Routers

InHand Networks ODU2000 Cloud-Managed 5G Outdoor Unit Edge
Routers

Overview

This manual is for the installation and operation of the ODU 2002 5G outdoor unit of Inhand Networks. Before installation, please confirm the product model and accessories in the package and purchase a SIM card from the operator that supports the local network. Please refer to the actual product for specific operations.

Packing list

Every ODU 2002 product shipped from the factory includes common accessories.
After you receive our product, please check carefully. If you find any missing or damaged, please contact Inhand sales personnel in time.

Part Name	Quantity	Description
ODU 2002

1

| ODU 2002 SG outdoor unit
Ethernet cable|

1

| 1m Ethernet cable
Power adapter + AC|

1

| S0V/0.3A PoE power adapter support IEEE B0 2.3af standard
SG antenna|

2

| SG antenna*2
SG MIMO antenna|

4

| SG MIMO antenna*4
Wi-Fi antenna|

1

| Wi-Fi antenna*1
GNSS antenna|

1

| GNSS antenna*1
QSG|

1

| Quick Installation Guide
Mounting bracket|

1

| Adjustable bracket
Mounting plate|

1

| Mounting, plate
Stainliess steel pipe clamp|

2

| Support pole-mounted installation
Grounding wire|

1

| Ground connection

Panel Introduction

ODU 2002NA

Panel Introduction

Equipment Installation

Precautions for installation:

Power supply: ODU 2002 is powered by 802.af standard (50V/0.3A), please pay attention to the power voltage level.
Environmental requirements: working temperature: -30℃～70℃, storage temperature: -40℃～85℃.
Support to be mounted with bracket. Avoid direct sunlight, away from heat source or strong electromagnetic interference. Confirm that the installation position is strong enough to support the weight of the equipment and its installation accessories.
Check for cables and antennas required for installation.

Insert SIM card

ODU 2002 supports dual nano SIM cards
Unscrew the SIM card cover of the ODU 2002, then insert the SIM card(s) according to the following diagram.
Put the SIM card cover back in place, make sure the waterproof gasket is properly assembled to prevent leakage.

Attach antennas

Attach eight antennas to the TNC connectors marked 5G/5G MIMO/Wi-Fi and GNSS

Install the ODU 2002

Install the Mounting plate

Attach the mounting plate to the ODU 2002 using screws. Please make sure the top side facing upwards.

Wall-mounted Installation

Install the adjustable base on the wall in the desired angle and position.
Attach the mounted ODU 2002 to the base. Tighten the mounting bolts to lock the ODU 2002 in place.

Pole-mounted Installation

Install the adjustable base on the pole in the desired angle and position.
Attach the mounted ODU 2002 to the base. Tighten the mounting bolts to lock the ODU 2002 in place.

Cable installation

Grounding

Connect the grounding hole of the device to the ground through the grounding wire with OT terminal, cut the grounding wire into certain length according to field situation to avoid waste.

Connect the Ethernet Cable

Notice

Please make sure that the ethernet cable is inserted into the device in a standardized way. If not, the crystal head may be damaged when installing the waterproof PG head.
When removing the ethernet cable, the waterproof PG head must be removed first, and then the crystal head connected to the device must be removed.
Please confirm the diameter of Ethernet cable is between 4.8 mm to 6.5 mm.
Please ensure the cable glands are properly assembled to prevent leaks

Cut the Ethernet cable to the appropriate length according to the distance from the ODU to the power supply and pass it through the bracket.
Use the ethernet cable after the crystal head is processed and pass through the waterproof PG head in the order shown in the figure below.
Schematic diagram of patch cable passing through waterproof head
Insert the Ethernet cable into the network port of the device, and tighten the waterproof head in the order of B, C, D, E to complete the installation.

Connect PoE Power Adapter

Connect one end of the Ethernet cable to the PoE 2.5G LAN1 port and plug the other end into the 802.af(50V/0.3A) PoE Adapter or an router/switch with 802.3af port.

Inspection after Installation

Check the Device Installation

Confirm the device is fully secured to prevent falling.

Check the Cable Connection

Make sure the cables are bundled correctly.
Avoid dragging and damaging the device, we recommend you to fix the Ethernet cable on the bracke

Check the Power Supply

Confirm that the power cord is in good contact and meets safety requirements.
Turn on the power to supply power to the device and confirm the device can work normally

Access to Internet

ODU 2002 supports two ways of accessing to Internet: cellular and wired. Wi-Fi is only used for configuration.

SIM Card Dial-up

Connect via APP

Insert the SIM card when device is power off, and connect the 5G antenna to the device, and log in the IN Cloud APP.
Click the “Device” directory below to enter the [Device] page, click the menu button in the upper right corner, and select [Add Device]. Scan the QR code on the ODU 2002 to add device
After scanning the code successfully, configure the name, serial number, and description information of the device.
After adding the device, if the device fails to connect to the network, you can click “Configure local device” to configure the device to connect to the cloud. The ODU 2002 enables the http access and Wi-Fi AP function by default.
Scan the QR code on ODU 2002, and then the APP will automatically connect to the device via Wi-Fi.
After the connection succeeds, APP will will automatically log in to the device and enter the networking configuration interface, confirm the information and submit.

Connect via PC

Step 1: Power off the device, insert the SIM card into the card slot, connect the 5G antenna to the device, connect ODU 2002 and PC with Ethernet cable.
Step 2: Open a browser and enter the device’s default address 192.168.1.1 in the browser address bar. After entering the username and password (default: adm/123456), enter the device’s WEB management interface. If the page prompts that the webpage is not secure, open the hidden or advanced options and select “Proceed to website”.
Step 3: Click “Internet” on the left navigation bar, click the edit button behind the “Cellular” button to set up the dial-up parameters, the device enables the dial-up function by default, wait for a few minutes to go online, and re-enable the dial up if it is not dialed.
Step 4: Check the dial-up status in the “Interface Status” of the “Dashboard”. The device connects to the Internet successfully if the “Cellular” icon turns green. Click the “Cellular” icon to view information such as signal strength, IP address, and traffic consumption.

Wired Networking

Connect via APP

Step 1: Click the “Device” directory below to enter the [Device] page, click the menu button in the upper right corner, and select [Add Device]. Scan the QR code on the ODU 2002 to add device.
After scanning the code successfully, configure the name, serial number, and description information of the device.
After adding the device, if the device fails to connect to the network, you can click “Configure local device” to configure the device to connect to the cloud. The ODU 2002 enables the http access and Wi-Fi AP function by default.
Scan the QR code on the nameplate of the unit, then the APP will automatically connect to the ODU via Wi-Fi.
After the connection succeeds, APP will automatically log in to the device and enter the networking configuration interface, confirm the information then submit.

Configure via PC

Step 1: Connect the LAN1 port to the PC.
Step 2: Set the IP of the PC and the gateway device to be in the same network segment. DHCP automatically obtains the address (recommended).Use a fixed IP address. The DHCP server function is enabled by default on the LAN port of the device, and the PC and the device must be in the same segment. On PC side, the IP address needs to be configured as any address in 192.168.1.2~192.168.1.254, the gateway is set to 192.168.1.1, the subnet mask is 255.255.255.0, and the DNS configuration is 8.8.8.8/operator DNS server address.
Step 3: Enter the device default address 192.168.1.1 in the browser address bar, enter the user name and password (adm/123456 by default), and enter the device WEB management interface. If the page prompts that the webpage is not safe, turn on Hidden or Advanced, and choose to continue.
Step 4: Click “Internet” on the left navigation bar to view the device interface status. ODU 2002 enables WAN1 with DHCP mode by default. ODU 2002 supports three methods to allocate WAN address, dynamic DHCP (recommended), static IP and PPPoE. Click the Edit button next to WAN to modify the WAN port.
DHCP: The DHCP service is enabled by default on the WAN interface of the device, and the ODU can be connected to the network by connecting the WAN interface to the Internet with a ethernet cable.
User can manually configure the address assigned by the operator or the upstream device. After the configuration is completed, the router will access the network through the specified static IP.
PPPoE: Users can configure broadband dial-up. After the configuration is completed, the router will access the network through broadband dial-up.
Step 5: Verify network connectivity Via Ping tool in System/ Tools page.

Remote Manage Platform

In Cloud Platform

Register/login to the Platform

Use a browser to visit InCloud, address: https://star.inhandcloud.com/, and enter In Cloud registration and login page. (Chrome is recommended)
After registration, login to the cloud platform with the registered email. Enter the “Security Settings” page to change your password and bind your mobile phone number; after binding your mobile phone number, you can use your mobile phone number to log in to the cloud platform next time.

Adding devices to the Platform

Log in to In Cloud Manager platform, click “Device >> Add” in the navigation menu to add
your device by filling device’s serial number.

Quick User Guide

Restore to Default Factory Settings

Reset/Restore Remotely

Log in to the InCloud Manager platform, click “Device >> Command” in the navigation bar, click the “Restore to Factory ” button and after confirm, device will reboot and restore to default settings.

Hardware Restore

To restore to default settings by the reset button, please perform the following steps:

When the unit power ON, press and hold the reset button for 5-10 seconds.
When System LED is steady on blue, release RESET button, system LED will blink in blue, and press the RESET button again.
When System LED is steady on blue, release the RESET button. The unit has been restored to default settings and will start up normally later.

Log and Diagnostic Data

Login to In Cloud Manager, click the “Device >> Device Details >> Tools” menu in the navigation bar, and click the corresponding button to complete the download of logs and diagnostic data.

Quick User Guide