JETE TWS FS2 Hands Free Bluetooth User Manual

JETE TWS FS2 Hands Free Bluetooth

Please read the process carefully before using the product.

Product Introduction

Thank you for purchasing JETE products. For optimal and safe performance, please read the instructions carefully before using this product.

Package Content

Description Structure Product

1. Microphone
2. MFB (Multifunction Button)
3. LED Indicator Charging Case
4. Charger Port

Tips
Gently insert the earbuds into your ears and adjust the position to fit your ears.

Attention
Please open the plastic seals on both ends of the earbuds and do not put the earbuds in the charger into the charging case for approximately 10 minutes for optimal use.

How to Use
How to Turn On the Earbud:

• Take the earbuds out of the charging box to switch on.
• When the earbuds are outside the charging case touch and hold for 5 seconds to switch on.

How to Turn Off the Earbud

• Put the Earbuds into the charging box and rotate the characters, so that the earbuds will not fall out.
• When the earbuds are outside the charging case touch and hold for 5 seconds to switch on.

How to Connect the Device with Earbud

1. Take the earbuds out of the charging box.
2. The indicator will flash red and blue on one of the earbuds.
3. Switch on bluetooth on the device.
4. Then switch on the search and select “JETE-FS2”.
5. The earbuds are ready for use.
6. If within 180 seconds of the earbuds activating you do not pair with bluetooth on your device. The earbuds should be restarted.

Notes

• The earbuds will automatically connect to the previous device when switched on.
• The connection will be lost when you go out of range and will automatically reconnect when you return to range within 3 minutes.

How to Answer and End an Incoming Call

• Press 2 times at the earbud on the right/left to answer the call.
• Press 2 times at the earbud on the right/left to end the call.

How to Reject a Call
Press the 2 seconds at the earbud on the right/left to reject the call.

How to Active Feature Voice Assistant
Press 2 times at the earbud on the right/left for active voice assistance

How to Play / Pause
Press 2 times at the earbud on the right/left to Play/pause music.

How to Play Music

• Next song: Press 3 times at the earbud on the right to play music next.
• Previous song: Press 3 times at the earbud on the left to play music previously.

How to Increase & Decrease Volume

• Press 2 seconds at the earbud on the left to increase volume.
• Press 2 seconds at the earbud on the Right to decrease volume.

How to Charge

Charging Case

• Charge the box, the indicator will flash red when charging and then the indicator will flash after finishing charging.

Earbud

• Put the earbuds into the charging box to charge, the earbud indicator will be red and the indicator will turn off when the earbud battery is fully charged.

How to Mono Mode at Earbud FS2

• Take out one of the earbuds from the charging box and it will be connected to the previous device.
• Then play back and forth this mode can also be used to make phone calls.

How to Switch Mode

• Press 2 times on the right earbud to switch modes.

How to Factory Reset

• Press 6 times at the earbud on the left/right to reset the earbud.

Specification

Maintenance

Please read the following recommendations before using JETE

• Avoid exposing the device to water vapor or humid places. This can affect the internal circuit.
• Do not use cleaning solutions to clean the device.
• Do not expose the device to extreme heat or cold, as this can damage the device or change certain plastic parts.
• Avoid exposing the device to sharp objects, as this can cause scratches and damage.
• Do not disassemble or modify the device.
• Do not drop the device, as this can damage the circuitry.
• Always store the device at room temperature.

How to Warranty Claim JETE Product

1. All warranty claims can be made at the list of Authorized Outlets listed on the warranty card.
2. Buyers can come to an authorized Outlet or contact Customer Service at +62812-1739-3609 if they want to exchange the product online.
3. All expedition shipping costs/product postage are borne by the buyer.
4. When claiming the warranty, the buyer.

MANDATORY to show the completeness of the warranty:

• A purchase receipt that clearly states the name of the outlet and the date of the transaction.
• The product must still be within the specified warranty period.
• Warranty card that has been filled out.
• Box/Packing Product.

Please inform the constraints / product damage that occurs to our staff.

WARRANTY DOES NOT APPLY if USER DAMAGE is found, namely:

• BROKEN, CRACKED, BURNED, DROPPED, MODIFIED BY YOURSELF, SUBMERGED IN WATER.
• If there are problems during warranty claims or other questions, please contact Customer Service at +62812-1739-3609

Terms and Conditions of Warranty

1. This warranty is valid for 2 years for the original JETE products.
2. This warranty is valid for the warranty period stated on the product packaging since the date of sale.
3. During the warranty period, the user is exempt from any replacement costs that may occur.
4. The user must show the warranty card and purchase receipt when applying for a warranty.
5. The warranty applies to functional damage:
   • Dysfunction.
   • Audio not detected.
   • Indicator off.
   • Battery damage.

This warranty DOES NOT APPLY if
PRODUCT IS BROKEN, CRACKED, BURNED, FALLEN, MODIFIED YOURSELF, SOAKED IN WATER.

• Supporting accessories such as cables, adapters, etc.
• Abnormal use, not stored properly, natural disasters, modified, or anything intentionally.
• The product has been repaired by a third party.
• The data is not filled in completely by the seller and buyer.
• Damage caused by user error.
• The product warranty period has expired.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>