PIoneer BDR-WX01DMU Blu Ray Disc Drive Owner’s Manual

PIoneer BDR-WX01DMU Blu Ray Disc Drive

Product Specifications

• Product Name: BD/DVD/CD WRITER
• Model Number: BDR-WX01DMU
• Manufacturer: Pioneer Electronics (USA) Inc.
• USB Compatibility: USB 3.2 Gen1/2.0
• Laser Classification: Class 1 with a laser diode classified as Class 3B
• Not Water Resistant

Product Usage Instructions

Safety Information
Before using the drive, make sure to read all warnings and safety information in the owner’s manual. Do not attempt to open the product or remove any covers.

Installation

1. Connect the BD/DVD/CD writer to your computer using the provided USB cable.
2. Ensure that the device is placed on a stable surface away from liquids.
3. Plug the power adapter into a suitable power source.

Usage

1. Insert a Blu-ray, DVD, or CD disc into the drive.
2. Use compatible software on your computer to access, read, or write data to the disc.
3. Eject the disc safely after use by using the eject button on the drive or through software commands.

Frequently Asked Questions (FAQ)

• Q: Is the BD/DVD/CD writer water-resistant?
  A: No, the product is not water-resistant. Avoid exposure to liquids to prevent damage.

• Q: What should I do if there is a problem with the device?
  A: If you encounter issues, refer servicing to qualified service personnel. Do not attempt to repair the device yourself.

• Q: Can I use this product with USB 2.0 ports?
  A: Yes, this BD/DVD/CD writer is compatible with USB 2.0 ports in addition to USB 3.2 Gen1.

USB 3.2 Gen1/2.0 External BD/DVD/CD Writer for Archive Graveur de BD/DVD/CD externe pour l’archivage USB 3.2 Gen1/2.0

BDR- WX01DMU

Owner’s Manual

Thank you for purchasing this Pioneer product. Before using the drive, please ensure that you read all warnings, cautions, notices, and other important safety information in this owner’s manual, which also contains important information including regulatory data, the software license agreement, details on product registration, service procedures, and guidelines on installation and use. Be sure to keep this manual in a safe place.

Precautions Regarding Use

• Pioneer accepts no liability for the loss of any data and limits its responsibility for any failure of the product to perform properly as provided in the product’s One Year Limited Warranty. It is strongly recommended to regularly back up all critical data.
• Care must be taken not to infringe copyright restrictions under the laws of each country. If this device is used to record copyrighted materials, approval must be obtained from the respective copyright holders. The recording of copyrighted materials without the express approval of the respective copyright holders may result in legal penalties. YOU ARE RESPONSIBLE FOR YOUR USE OF THIS PRODUCT. Pioneer disclaims any and all responsibility for any legal damages resulting from the use of this device in the unauthorized copying of copyrighted materials.
• All names of corporations, products, and systems listed herein, even when the (™) or (®) symbols are omitted, are considered the registered trademarks of the respective owners.
• Specifications and the external appearance may be subject to change without notice.
• Images used in this Owner’s Manual may be different from actual product.

product is handled incorrectly.
| This symbol is used to call attention to precautions that should be taken in order to use the product safely, and to points that should be taken note of in order to maintain the product’s performance.

WARNING
This product’s classification has been determined under IEC 60825-1:2014, Safety of Laser Products. This Class 1 product contains a laser diode classified as Class 3B. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

The following caution label appears on your unit:

WARNING
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

WARNING
THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Product Name: BD/DVD/CD WRITER
Model Number: BDR-WX01DMU
Responsible Party Name: Pioneer Electronics (USA) Inc.
Address: 970 West 190th Street, Suite 360, Torrance, CA 90502
Phone: 800-421-1404
URL: https://www.pioneerelectronics.com/PUSA/

NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Information to User
Alterations or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

WARNING
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING
THIS PRODUCT IS NOT WATER RESISTANT. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.

For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible.

CAUTION
This product satisfies FCC regulations when shielded cables (with Ferrite- cores attached) and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables (with Ferrite-cores attached) and connectors for connections.

WARNING
This product is equipped with a three-wire grounding (earthed) plug – a plug that has a third (grounding) pin. This plug only fits a grounding-type power outlet. If you are unable to insert the plug into an outlet, contact a licensed electrician to replace the outlet with a properly grounded one. Do not defeat the safety purpose of the grounding plug.

Operating System

Operating Environment (Windows®)
The following operating environment details are guidelines. Meeting these guidelines does not guarantee operation.

• DVD/CD disc recording and playback
  

  • Supported OS: Windows 11, Windows 10

• Blu-ray disc recording and playback

  • Supported OS: Windows 11, Windows 10
  • DM for Archive-compatible disc recording in DM Archiver (dedicated application)

• Supported OS: Windows 11, Windows 10 (64-bit)
  [Recommended hardware]

  • CPU: Intel® Celeron® 2.8 GHz or above
  • Memory: 4 GB or above
  • Hard disk free space: 25 GB or above
  • Interface: USB 3.0 or above
  • Display resolution: 1280 × 720 or above
  • Following applications installed (Included in the DM Archiver installer)
  • Microsoft NET framework 4.8 or later
  • Microsoft Visual C++ 2022 Redistributable Package (V++ 14.32.31 326) or later

Refer to the product website for the latest OS support status.
https://www.pioneerelectronics.com/PUSA/Computer/Computer+Drives/BDR-WX01DMU
The required operating environment may differ depending on the OS or applications used.
Please consult with the software or OS providers regarding any questions about the OS or applications.

Operating Environment (macOS)
Supported OS: OS X El Capitan 10.11, macOS Sierra 10.12, macOS High Sierra 10.13, macOS Mojave 10.14, macOS Catalina 10.15, macOS Big Sur 11, macOS Monterey 12, macOS Ventura 13

DM for Archive disc recording in DM Archiver (dedicated application)
Refer to the product website for the latest OS support status.
https://www.pioneerelectronics.com/PUSA/Computer/Computer+Drives/BDR-WX01DMU

Before Use

Checking accessories

• Owner’s manual
• Warranty card
• USB cable (USB Type-A → USB Type-B) (1 m (3 ft. 3 in.))
• USB conversion adapter (USB Type-A → USB Type-C)
• Insulators for horizontal placement × 4
• Insulators for vertical placement × 8
• AC adapter (OWR8003-) (1.2 m (3 ft. 11 in.))
• Power cord (0.5 m (1 ft. 8 in.))
• DM for Archive-compatible disc BD-R 25 GB × 1

If any accessories are not included, please contact your dealer.

Download the “DM Archiver” dedicated application from the following website: https://pioneer.jp/device_e/product-e/ibs/device_e/dev00001r_e.html#DriveUtility

To perform high-speed writing, please use media that supports high-speed recording and writing. Refer to the Pioneer website for details. https://pioneer.jp/device_e/product-e/ibs/device_e/dev00003r_e.html

Information on the product

https://www.pioneerelectronics.com/PUSA/Computer/Computer+Drives/BDR-WX01DMU

IMPORTANT SAFETY INSTRUCTIONS

When using this product, be sure to check the safety information indicated in this manual and on the label of the device and the AC adapter.

WARNING

Operating Environment

• Operating environment temperature and humidity: + 5 °C to +35 °C (+41 °F to +95 °F); less than 80% relative humidity (ensure cooling vents not blocked)
• Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or extreme heat (direct sunlight or strong artificial light).
• Ensure that water does not enter the device, and that it is kept dry. Do not use in locations with high humidity. Doing so may lead to fire or electric shock.
• Do not use in wet locations such as bathrooms or kitchens. Doing so may lead to fire or electric shock.

Installation

• To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on or anywhere near the equipment.
• Do not place near open flames, such as a fireplace, or heat sources. Doing so may lead to fire or deforming.
• Ensure that the power cord is fully inserted into the AC adapter, and that the power plug is fully inserted into the outlet. Failure to do so may cause heat to be generated or dust to adhere, potentially leading to fire. Additionally, touching the blades of the power plug may result in electric shock.
• Do not connect the power plug to outlets where the plug is loose even when inserted fully. Doing so may cause heating, and could lead to fire. Ask an electrician to replace any loose electrical outlets.
• Do not place in unstable locations such as on a wobbly table or on an incline. The device may fall or topple, leading to injury.
• Do not place the device in locations subject to large amounts of oily smoke, moisture, or dust, such near a cook top or close to a humidifier. Doing so may lead to fire or electric shock.
• Do not set device anywhere that it might accidentally be stepped or sat upon. Please take particular care where children are around so that the device does not fall or break, leading to injury.

Using this function

• During operation, do not subject the device to shock or vibration, or plug in or unplug the USB cable or AC adapter power plug.
• During operation, do not move or pick up the device. The disc rotates at high speed, and picking up or moving the device may damage the disc. To move the device, first remove the disc, then turn the power off.
• Do not place any objects on this device, which may damage it or cause it to become unstable and fall over or fall off, potentially leading to injury.
• When using this device, ensure that you adhere to the displayed warnings and cautions from your PC manufacturer.

WARNING
When using the AC adapter and power cord supplied with this device, ensure that you observe the following:

• Do not place any objects on the power cord or AC adapter cord. Additionally, ensure that the cords do not become trapped under the device. Protect the power cord from being walked on or pinched particularly at plugs, outlets, and the point where they connect to the device. Do not cover the cord with a rug or other items.
• If there is dust or metal adhering to or close to the blades of the power plug, pull out the plug and then wipe them off with a dry cloth. Continuing to use the device if dust has collected may lead to fire or electric shock.
• Do not damage, modify, forcibly bend, twist, pull, or heat the power cord or AC adapter cord. Doing so may lead to damage to the cord, which can result in fire or electric shock.
• The AC adapter and power cord supplied are for use with this device only. Do not use them with other devices. Doing so may lead to fire or electric shock.
• Do not use any AC adapter or power cord other than those supplied with this device. Using other AC adapters or power cords may lead to fire.
• Keep the AC adapter and power cord out of reach of children. Accidentally wrapping the AC adapter around the neck may result in suffocation.
• Do not use with voltages other than the indicated power supply voltage (120 V AC, 60 Hz). Doing so may lead to fire or electric shock.
• Do not connect this device to a direct current (DC) power source (such as used on a ship). Doing so may lead to fire or electric shock.
• Do not plug in or unplug the power plug with wet hands. Doing so may lead to electric shock.
• When unplugging the power cord, do not pull on the cord. Doing so may lead to damage to the cord, which can result in fire or electric shock. Ensure that you hold the plug when unplugging.
• Keep the power cord away from heat sources. Failure to do so may cause the insulation on the cord to melt, which can result in fire or electric shock.

IMPORTANT SAFETY INSTRUCTIONS

• When moving the device, ensure that the power plug is first unplugged from the outlet, and that the USB cable is removed. Failure to do so may lead to damage to the cord, which can result in fire or electric shock.
• Do not touch the power plug if lightning occurs. Doing so may lead to electric shock.
• Keep the AC adapter and power cord away from water droplets.
• Do not remove the cover of the device or AC adapter or modify the device or adapter. The interior of the device contains high-voltage parts, and opening it may lead to fire or electric shock. Ask your dealer to carry out any internal inspections, maintenance, and repairs. This device is a precision instrument, so refer this product to an authorized dealer or service center if disassembly is required.
• Due to the specifications of the product, all displays turn off when operation is stopped, thus the product may appear the same as when the power plug has been removed from the outlet. However, the power supply has not stopped providing power. To disconnect the product from the power supply completely, you must remove the power plug (breaker) from the outlet. Place the product close to an outlet, where the power plug (breaker) can be reached easily. Leaving the power plug plugged in for extended periods of time may lead to fire.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• When connected to the AC adapter, do not put anything on or over the device or AC adapter.
• Do not overload wall outlets and extension cords. Doing so may result in fire or electric shock.

Ensure you abide by the following precautions, as failure to do so may lead to fire or electric shock.

• Connect cables to the device only after checking that the cables have not deteriorated and are not damaged.
• Do not disassemble or modify the device. Do not allow metal, flammable objects, chemicals, water or other foreign matter to enter the device.

In the following circumstances, turn off the device power, unplug the PC, and contact your dealer or Pioneer:

• If the device smokes, or abnormalities such as strange smells or noises are observed.
• If water or foreign objects have entered the device.
• If the device has been dropped or its cover, the power cord, plug, or chassis is damaged.

The indicator symbols used for this product (including accessories) indicate the following:

AC (Alternating Current)
DC (Direct Current)

Cautions in Usage

• Moisture can form in the operating section of the product if the drive is taken from cool surroundings to a room with a warmer temperature. Let the drive stand for one to two hours in the new location before turning it ON. Do not use this product outdoors.
• Avoid installing this drive in a location with exposure to large quantities of dust, high temperatures, high humidity, or excessive vibrations or shocks.
• Do not inspect or modify the interior of the device.
• Use a soft, dry cloth when wiping off dirt from the exterior of the device and the AC adapter. In the case of significant soiling, dilute a neutral cleaner five to six times in water and use this to moisten a soft cloth, wipe the soiling away, then dry with a dry cloth. Do not use volatile chemicals such as benzene, thinners, alcohol, or aerosol sprays, as these may damage the surface. Before using chemically treated cloth intended for the care of electronics, carefully read the cautions included with the cloth.
• When you do not intend to use the device for an extended period due to travel, etc., for safety, be sure to unplug the power plug from the outlet.
• There are no guarantees regarding data if data is lost while using this device. Ensure you make regular backups of your data for recovery in case of malfunctions.

Handling discs
Handle the recording surface of the disc so that it is free from scratches, fingerprints, dirt, dust, water, oil, salt, and other contaminants. If there are any scratches, fingerprints, dirt, dust, water, oil, salt, or other contaminants on the disc, refer to the following cleaning method and remove the contaminants from the disc before use.

Disc removal
While pressing the circular central part of the case, use your other hand to hold the edges of the disc and lift it up to remove it from its case.

Disc handling
Hold the disc so that you do not touch its recording surface.

Lightly rest your finger in the center hole of the disc. Inserting your finger into the hole excessively may result in it getting stuck.

Cleaning

• Avoid touching the recording surface of the disc as much as possible.
• Before wiping, try removing contamination with a camera-use air blower or similar device.
• When wiping off dirt, dust, or similar from the recording surface of the disc, use a soft cloth that does not produce lint, such as a microfiber cloth for glasses, or a commercially available cleaning cloth.
• When wiping, wipe gently from the inside to the outside Correct edge in order to prevent damage to the disc. Wiping with a circular motion may accidentally damage the disc, resulting in data loss.
• If contamination is difficult to remove, dampen the cloth above with water or ethanol and wipe gently.
• When using a commercially available cleaning liquid, ensure that you check the usage instructions.
• Do not use solvents such as benzine, thinners, or record cleaners, or anti-static agents.
• Ensure that there is no water or ethanol residue left on the disc.
• If there is any contamination, this will result in an error during further recording.

Writing on the label surface and affixing labels
Use a felt-tip pen to write on the label surface. Do not use writing implements that have a hard tip. When writing on the label surface, refer to “Disc handling” and  handle the recording surface of the disc so that it is free from scratches, fingerprints, dirt, dust, water, oil, salt, and other contaminants. If there are any contaminants or dust, etc. on the disc, refer to “Cleaning” and remove such contaminants before use while taking care not to damage the disc.
Do not apply labels or adhesive tape, etc. to the label surface.

Returning the disc to the case
When returning the disc to the case, ensure that the disc label surface is facing upward and press down the center (area around the hole).

Storage

• When storing the disc, ensure that it is kept in the plastic case in which it was purchased.
• Be careful not to let the recording surface of the disc come into contact with anything.
• When storing, avoid high temperatures, high humidity, and direct sunlight, and store in an environment free from external stresses.

Backup of important data
Mistakes in usage may accidentally damage the disc and result in data loss. Accordingly, it is recommended to take backups (storing of both originals and duplicates, etc.).

Unusable discs

• Do not use cracked or significantly warped discs. Doing so may lead to a malfunction in the drive.
• When using old or rental discs, check that there are no cracks around the center hole of the disc. The centrifugal force from high-speed rotation may enlarge these cracks, causing the disc to break.
• Do not use discs with special shapes (heart-shaped, hexagonal, etc.) or other non-standard discs. Doing so may lead to a malfunction in the drive.

Features

•   Maximum write speed|
---|---
BD-R| 12x| DVD-R, DVD+R| 16x
BD-R DL| 12x| DVD-R DL, DVD+R DL| 8x
BD-R TL| 8x| DVD-RW| 6x
BD-R QL| 6x| DVD+RW| 8x
BD-RE/DL/TL| 2x| M-DISC (DVD)| 6x
M-DISC (BD) SL| 6x| CD-R| 40x
M-DISC (BD) DL M-DISC (BD) TL

BD-R DM for Archive

| 8x 6x 4x*| CD-RW| 24x
•   Maximum read speed| | |
BD-ROM SL| 12x| M-DISC (BD) TL| 6x
BD-ROM DL| 8x| DVD-ROM SL| 16x
BD-R SL| 12x| DVD-ROM DL| 12x
BD-R DL| 8x| DVD-R, DVD+R SL| 16x
BD-R TL/QL| 6x| DVD-R DL, DVD+R DL| 12x
BD-R LTH| 8x| DVD-RW, DVD+RW| 12x
BD-RE SL| 10x| M-DISC (DVD)| 16x
BD-RE DL| 6x| CD-ROM| 40x
BD-RE TL| 4x| CD-R| 40x
M-DISC (BD) SL M-DISC (BD) DL| 12x 8x| CD-RW| 24x
•    Disc resonance stabilizer| | |

Disc resonance stabilizer

• When recording using other than the “DM Archiver” DM for Archive dedicated writing application, these speeds will be SL 12x.
• Check our website regarding sales of DM for Archive-compatible discs.

Note
DM (Defect Management) for archive enables long-term data storage by recording with specific Drive and Disc and dedicated applications.
Drives and discs compatible with DM for Archive will display the following logo mark.

Refer to the product website for details.
https://www.pioneerelectronics.com/PUSA/Computer/Computer+Drives/BDR-WX01DMU

Supported formats

• BD-ROM (SL/DL)
• BD-R (SL/DL/TL/QL)
• BD-R (LTH)
• BD-RE (SL/DL/TL)
• M-DISC BD-R (SL/DL/TL)
• DVD-ROM (SL/DL)/DVD-Video
• DVD-R for General Ver.2.0/2.1
• DVD-R DL
• DVD-RW
• DVD+R
• DVD+R DL
• DVD+RW
• M-DISC (DVD)
• CD-ROM Mode 1&2
• CD-ROM XA Mode 2 (form 1, form 2)
• Photo CD (single and multi-session)
• CD-R
• Video CD
• CD-DA
• CD-Extra (CD PLUS)
• CD Text
• CD-RW,
• HighSpeed CD-RW,
• UltraSpeed CD-RW,
• UltraSpeed+ CD-RW

Note

• Compatible applications are necessary to write the formats listed above.
• Media that meets the BD, DVD, and CD writing speed standards is required.
• Do not use 8-cm (3-9/64 in.) Disc adapters. Doing so may lead to malfunction.
• Do not use cracked discs. When using high-speed recording or playback, cracks may enlarge, which is dangerous.

BD/DVD media compatibility

DVD-RW Ver. 1.0 discs recorded in video mode can be played back on this device and DVD-ROM drives compatible with the DVD-RW Ver. 1.0 standard. Please note that they cannot be played on general DVD players and recorders.

Part Names and Functions

Front

1. Forced ejection hole
   If the disc tray does not open even after pressing the eject button, the disc tray can be opened by inserting a long, narrow item such as the end of a large paper clip into this hole.
   In normal use, open the disc tray by using the eject button.
   When using the forced ejection hole, ensure that the power is turned off, and wait for at least one minute for disc rotation to stop.

2. Busy indicator (BUSY)
   Indicates the operational status as follows.

   • When power off Off
   • When operation stops Off
   • When operating On
   • When reading Flashing
   • When writing Flashing
   • When tray opening/closing On
   • If there is no access for a certain period of time, the operation will stop.
   • Beware that electricity may be flowing even if the LED is off.

3. Eject button

   • Opens and closes the disc tray.
     When this device is connected to a Mac® with a disc inserted, this function cannot be used due to macOS® specifications. Please check the macOS User Guide for how to operate with a Mac.

4. Disc tray

   • Press the eject button to open the disc tray, and with the label side facing up, place a disc in the tray aligned with the grooves.
   • Press the eject button, or lightly push the front of the tray to close it.
   • Do not forcefully pull the disc tray open.

Precautions on playing 8 cm (3-9/64 in.) Discs

• 8 cm (3-9/64 in.) disc adapters cannot be used with this unit.
• When this unit is installed flat, 8 cm (3-9/64 in.) discs may be used by placing them in the 8 cm (3-9/64 in.) disc depression in the center of the disc tray.
• When this unit is installed vertically, 8 cm (3-9/64 in.) discs cannot be used.

Applying the insulators (recommended application)

Caution

• When using this product, be sure to use the supplied insulators. If the insulators are not applied, there is a risk of faulty operation or noise due to vibrations.
• When applying each insulator, make sure not to place it over a protruding part.
• Before application, wipe off any oil or dirt on the casing.

WARNING
Do not place the unit within the reach of young children as the insulators could be swallowed accidentally. In the event that a part is swallowed, seek medical attention immediately.

Rear

1. DC power connector
   Connect the AC adapter included with the device.

2. USB connector (Type-B)

Connection

Connecting the power cord

Note

• Do not use AC adapters or power cords other than those included with this device.
• In the case of emergency, immediately remove the power plug from the outlet.
• Connect the power cord before connecting the USB cable to the computer.
• The power will not turn on if the USB cable is not connected.

Connecting the USB cable
When using this product, connect the device to a computer using the included USB cable.
This device supports hot plugging.

1. Turn on the computer power and start operating system.
2. With your Windows or Mac operating system running, connect the USB connector on the rear of the device to the computer using the included USB cable or USB conversion adapter.

• If connected to a USB 2.0 port, it will function as a USB 2.0 device.
• When using DM Archiver, connect to a USB 3.0 port.

During data transfer, do not remove the USB cable.

Note

• It is recommended to connect to USB 3.0 port or above. If a USB 3.0 cable is connected to a USB 2.0 port, the connection will be limited to USB 2.0 performance standards.
• This unit can operate with USB 1.1 but will not provide optimum performance.
• Connecting this unit through a USB hub or using cables other than those specified may result in faulty operation.
• The unit will not run on power supplied from the USB connector (bus power). Be sure to use the unit with the AC adapter supplied with the unit connected.
• Do not use a USB cable or USB conversion adapter other than that included with this device.

WARNING
Do not place the unit within the reach of young children as the USB conversion adapter could be swallowed accidentally. In the event that a part is swallowed, seek medical attention immediately.

Checking the connection
When connection is complete, use the following method to check that the device is correctly recognized by the computer’s system.

1. From the [Control Panel], open [Device Manager] and open the CD-ROM or DVD/CD-ROM item. Check that the product is correctly recognized by the computer’s system.
   You can also right-click the Windows Start button to open “Device Manager”.

2. Check that the drive icon is displayed.

Removal
Check that there is no disc in the drive, and remove the USB cable. Be sure to connect the AC adapter included with the device before use.

Forcefully ejecting the disc
In the following situation, you can forcefully eject the disc by using the forced ejection hole.

If the disc does not eject using the eject button or through the software.

1. Check that the computer power is turned off, and that the disc has stopped rotating.
2. Straighten a paper clip or similar object, and insert this straight into the forced ejection hole and push hard.
3. The disc tray will come out by 5 mm (3/16 in.) to 10 mm (25/64 in.), so pull out the tray and remove the disc.

Note

• Never forcefully eject the tray while the disc is still rotating, as doing so may lead to injury or damage to the disc.
• Do not place items within 14 cm (5-33/64 in.) of the front of the device, as doing so may obstruct disc ejection.

Downloading and Installing DM Archiver

• This is an application for both Windows and macOS. Check the compatible OS versions on the product website.

[Download]

1. Access
   https://pioneer.jp/device_e/product-e/ibs/device_e/dev00001r_e.html#DriveUtility

2. Perform user registration.

3. In the software license agreement, click “Agree to Download”.
   The installer will be downloaded to the specified folder.

[Installation]

1. Run the installer.
   Windows: SetupDMArchiver(E)_V.exe Mac: SetupDMArchiver_V.dmg

2. Install the application following the installer prompts.

[Application instructions]
For details on how to use the app, check the instructions in the app.
Click help [?] at the upper right corner of the application screen to view the application’s instruction manual in PDF format.

If you have any questions regarding operation, refer to the application’s instruction manual, or to the FAQs on the product website.

Specifications

[Installation]
The device can be installed horizontally or vertically.
[Disc size]
12 cm (4-23/32 in.) / 8 cm (3-9/64 in.)*

• 8-cm (3-9/64 in.) discs cannot be used when the unit is installed vertically.
• 8-cm (3-9/64 in.) disc adapters cannot be used.

[Transfer rate]
Data reading (sustained)
BD Max. 54.0 MB/s
DVD Max. 21.6 MB/s
CD Max. 6.0 MB/s

Data writing (sustained)
BD Max. 54.0 MB/s (12X BD-R)
DVD Max. 21.6 MB/s (16X DVD-R)
CD Max. 6.0 MB/s (40X CD-R)

Interface standards
USB 3.2 Gen1/2.0
• The transfer rate may be reduced depending on the condition (scratches, etc.) of the disc.

[Access time/Seek time]
Access time (random average)
BD 180 ms DVD 170 ms CD 160 ms
Seek time (random average)
BD 160 ms DVD 150 ms CD 140 ms

[ Others ]

• AC Input Power………………………………………………………………………….. 120 V AC, 60 Hz
• Power consumption (Rating)………………………………………………………………………… 30 W
• No load power consumption………………………………………………………………………… 0.1 W
• Dimensions (excluding foot pad)………………….. 160 mm (W) x 50 mm (H) x 220 mm (D)
• 6-19/64 in. (W) x 1-61/64 in. (H) x 8-21/32 in. (D)
• Drive net weight…………………………………………………………………………….. 1.1 kg / 2.4 lbs
• Operating temperature……………………………………………+5 °C to +35 °C (41 °F to 95 °F)
• Operating humidity…………………………………………………20 % to 80 % (no condensation)
• Buffer size………………………………………………………………………………………………….. 4 MB

[AC Adapter]

• Power source……………………………………………………………………. 120 V AC, 1.8 A, 60 Hz
• Maximum rated output………………………………………………………12.0 V DC, 3.0 A, 36.0 W
• No-load power consumption………………………………………………………………………. 0.08 W
• Dimensions (Body only)…………………………. 89.8 mm (W) x 27.0 mm (H) x 37.8 mm (D)
• 3-17/32 in. (W) x 1-1/16 in. (H) x 1-31/64 in. (D)
• Net weight………………………………………………………………………………… 0.15 kg / 0.33 lbs

[Accessories]
Owner’s manual
Warranty card

• USB cable (USB Type-A → USB Type-B) (1 m (3 ft. 3 in.))
• USB conversion adapter (USB Type-A → USB Type-C)
• Insulators for horizontal placement × 4
• Insulators for vertical placement × 8
• AC adapter (OWR8003-) (1.2 m (3 ft. 11 in.))
• Power cord (0.5 m (1 ft. 8 in.))
• DM for Archive-compatible disc BD-R 25 GB × 1

Specifications and the external appearance may be subject to change without notice.

Problems and Solutions

Unexpected errors in operation are often thought to be malfunctions. If you think there is a malfunction, check the items below according to the symptoms.
If the abnormality is not resolved even after taking the following measures, please contact your dealer or Pioneer.
Additionally, please consult with the application software manufacturer regarding any problems occurring in the application software.

The device does not operate
Are the cables connected correctly?
→ The drive power is turned on and off in conjunction with the power supply of the connected PC. Accordingly, connecting the device to an AC adapter and connecting to a USB port on a PC with the power turned on will turn the power supply on. Check that the USB cable and AC adapter are connected correctly.

The computer or application does not correctly recognize the device

• Is the USB cable or AC adapter connected correctly?
  • Make sure the cable is connected correctly.
  • Is the OS compatible with the device?
• Use an OS that supports this device.
• Use an OS specified in “Operating System” of this manual.

Is the disc set correctly in place?
→ Check that the disc is set correctly in place.

Data cannot be recorded/Error occurs during recording

• Is there sufficient space for recording?
• Check that the required application software is installed in the usage environment.
• Check that the operating environment being used meets the specifications for the application software being used.
• Recording on the disc at the selected speed is not possible.
  • Check that the disc supports the different recording speeds.
  • The speed may drop depending on the condition of the disc.
• Use of DM Archiver requires use of DM for Archive-compatible discs.
• Are you using a disc that has been finalized (no more recording is possible)?
• Is the disc correctly inserted with the label side facing up and the recording side facing down?
• Is the disc dirty or scratched?

A recorded disc cannot be read

• Is the disc inserted into the disc tray with the label side facing up?
• Are you using a blank disc?
• Is the disc dirty or scratched?
• Check that the required application software is installed in the usage environment.
• Is the device installed in a flat location?
• The optical components or disc may have condensation on them. Therefore, turn the device power off for a period of time and wait for it to fully dry before usage.

For other details on how to record on discs, refer to the manual or help screens for the application software being used.

For more stable disc recording and playback
The operating temperature range for this product is +5°C to +35°C (41°F to 95°F). However, recording and playback at +20°C to +30°C (68°F to 86°F) is recommended in order to ensure stable recording as well as playback on various players and drives.

The compliance standard is displayed as JIS X 6257
The compliance standard displayed in DM Archiver changes according to the OS language setting. To display ISO/IEC 18630 as the compliance standard, set the OS language to a setting other than Japanese.

Others

After-Sales Service
AFTER-SALES SERVICE FOR PIONEER PRODUCTS
Please contact the dealer from which you purchased the product for its after- sales service (including warranty service) or any other information. If the necessary information is not available, please contact Pioneer below:
PLEASE DO NOT SHIP YOUR PRODUCT DIRECTLY TO PIONEER
for repair without advance contact.

PIONEER CORPORATION
28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021, Japan

IMPORTANT NOTICE
The model number and serial number of this product are on the rear.
Record these numbers on your enclosed warranty card and keep in a safe place.

Playback of recorded BD/DVD/CD disc
Playback of recorded BD/DVD/CD discs is possible in BD-ROM/DVD-ROM drives and BD/DVD players that support these formats. Please consult with the respective product manufacturer regarding compatibility.

Region codes
The default region code of this drive is “1”. The region code for the drive can be changed only four times, and the region code set with the fourth change will be locked as the final region code. Accordingly, take care when changing this code.

DVD discs that do not have a region code set can be played on all players.

Trademarks and registered trademarks

• Pioneer and the Pioneer logo are registered trademarks of Pioneer Corporation.
• Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries.
• OS X El Capitan 10.11, macOS Sierra 10.12, macOS High Sierra 10.13, macOS Mojave 10.14, macOS Catalina 10.15, macOS Big Sur 11, macOS Monterey 12, macOS Ventura 13 are trademarks of Apple Inc., registered in the U.S. and other countries.
• M-DISC is a trademark of Millenniata, Inc.
• BLU-RAY DISC, the Blu-ray Disc logo, BDXL and the BDXL logo are trademarks of the Blu-ray Disc Association.
• All other trademarks belong to their respective owners.

© 2023 PIONEER CORPORATION. All rights reserved.
© 2023 PIONEER CORPORATION. Tous droits de reproduction et de traduction réservés.

PIONEER CORPORATION 28-8, Honkomagome 2-chome, Bunkyo-ku, Tokyo 113-0021, Japan / Japon Pioneer Digital Design and Manufacturing Corporation 5-5, Koishikawa 5-chome, Bunkyo-ku, Tokyo 112-0002, Japan / Japon
Printed in China /

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>