Pioneer DEH-S720DAB Car Receivers Instruction Manual

Pioneer DEH-S720DAB Car Receivers

Product Information

Specifications:

• Model: DEH-S720DAB
• Output Power: +4 dBm Maximum (Power class 2)
• Bluetooth Frequency Band(s): 2,400 MHz to 2,483.5 MHz

Product Usage Instructions

Before You Start:

Thank you for purchasing the PIONEER DEH-S720DAB. To ensure proper use, please read through the guide before using the product.
Keep the guide in a safe place for future reference.

Warnings and Cautions:

It is important to read and observe all warnings and cautions provided in the guide to ensure safe usage of the product.

Disposal Instructions:

Do not dispose of the product with general household waste.
Follow the separate collection system for electronic products for proper treatment, recovery, and recycling.

If You Experience Problems:

If the unit fails to work properly, contact your dealer or nearest authorized PIONEER Service Station for assistance.

Basic Operation:

The DEH-S720DAB features a multi-control dial, source/off button, display screen, disc loading slot, USB port, and band display window for easy operation.

Frequently Asked Questions

• Q: Where can I find the full operation manual?
  • A: The full operation manual is available on the website: https://www.pioneer-car.eu/eur/
• Q: What should I do if I need to dispose of the product?
  • A: Do not mix the product with general household waste. Follow the separate collection system for electronic products for proper disposal.
• Q: How do I contact customer support for technical issues?
  • A: In case of technical issues, please contact your dealer or the nearest authorized PIONEER Service Station for assistance.

“`

English
This guide is intended to guide you through the basic functions of this unit. For details, please refer to the Operation manual stored on the website.
https://www.pioneer-car.eu/eur/

Before You Start

Thank you for purchasing this PIONEER product To ensure proper use, please read through this guide before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this guide. Please keep the guide in a safe and accessible place for future reference.
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). For countries not mentioned above, please contact your local authorities for the correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.
WARNING
· Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.
· Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the device.
CAUTION
· Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids.
· Always keep the volume low enough to hear outside sounds. · The Pioneer CarStereo-Pass is for use only in Germany. · This product is evaluated in moderate and tropical climate condition under the Audio, video and similar
electronic apparatus – Safety requirements, IEC 60065.
CAUTION This product is a Class 1 laser product classified under the safety standard, IEC 60825-1:2014.

If you experience problems
Should this unit fail to work properly, please contact your dealer or nearest authorized PIONEER Service Station.

Basic operation

DEH-S720DAB
M.C. (multi-control) dial SRC (source)/OFF
DISP (display)

Disc loading slot

USB port (eject)

BAND/

Display window

(navigation)/LIST

Detach button

AUX input jack (3.5 mm stereo jack)

About the main menu

You can adjust various settings in the main menu.
1 Press the M.C. dial to display the main menu.
2 Turn the M.C. dial to select one of the categories below, then press to
confirm. · FUNCTION settings · AUDIO settings · SYSTEM settings · ILLUMINATION settings
3 Turn the M.C. dial to select the options, then press to confirm.

Frequently used operations

Purpose Turn on the power
Adjust the volume Select a source Change the display information Return to the previous display/list Return to the normal display from the menu Change the display brightness

Operation Press SRC/OFF to turn on the power. Press and hold SRC/OFF to turn off the power. Turn the M.C. dial. Press SRC/OFF repeatedly. Press DISP repeatedly. Press BAND/ . Press and hold BAND/ .
Press and hold BAND/ .

Setup operation
When you turn the ignition switch to ON after installation, the setup menu appears in the display.
WARNING Do not use the unit in standard mode when a speaker system for network mode is connected to the unit. Do not use the unit in network mode when a speaker system for standard mode is connected to the unit. This may cause damage to the speakers.

1 Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.

Menu Item

Description

LANGUAGE

Select the language to display the text information

ENG, from a compressed audio file. , TUR, FRA, DEU

CLOCK SET

Set the clock.

1 Turn the M.C. dial to adjust the hour, then press to confirm.

The indicator moves to the minute setting automatically.

2 Turn the M.C. dial to adjust the minute, then press to confirm.

FM STEP

Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

DAB ANT PW [ON]

Supply power to a DAB antenna. Select this when using the optional DAB antenna (AN-DAB1, sold separately) with the unit.

[OFF]

No power is supplied to a DAB antenna. Select this when using a passive antenna with no booster.

SPEAKER MODE Switch between two operation modes: the 2-way

[STANDARD], [NETWORK]

network mode (NETWORK) and the standard mode (STANDARD) according to the connections you have established.

After selecting the appropriate mode, turn the M.C. dial to select [YES], then press to confirm.

· You cannot complete the setup menu without setting the [SPEAKER MODE].

2 [QUIT :YES] appears.
To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO], then press to confirm.
3 Press the M.C. dial to confirm the settings.
[UPDATING LIST] appears in the display and the service list will be updated.
Tuner operation
Receiving preset stations
1 Press SRC/OFF to select [RADIO].
2 Press BAND/ to select the band.
[FM1] [FM2] [FM3] [MW]/[LW] 3 Press a number button (1/ to 6/ ).
Best stations memory (BSM)
1 After selecting the band, press the M.C. dial to display the main
menu.
2 Turn the M.C. dial to select [FUNCTION], then press to confirm.
3 Turn the M.C. dial to select [BSM], then press to confirm.
To store stations manually
1 While receiving the station you want to store, press and hold one of
the number buttons (1/ to 6/ ) until it stops flashing.

Connections

In the following, “NW” represents network mode and “STD” represents standard mode. According to the connections you have established, change the speaker mode to standard mode (STD) or network mode (NW).
WARNING
Important · When installing this unit in a vehicle without an
ACC (accessory) position on the ignition switch, failure to connect the red cable to the terminal that detects operation of the ignition key may result in battery drain.

ACC position

No ACC position

· Use of this unit in conditions other than the following could result in fire or malfunction. – Vehicles with a 12-volt battery and negative grounding. – When speaker output is used by 4 channels, use speakers over 50 W (maximum input power) and between 4 to 8 (impedance value). Do not use 1 to 3 speakers for this unit. – When rear speaker output is used by 2 of subwoofer, use speakers over 70 W (maximum input power). * Please refer to connections for a connection method.
· To prevent a short-circuit, overheating or malfunction, be sure to follow the directions below. – Disconnect the negative terminal of the battery before installation. – Secure the wiring with cable clamps or adhesive tape. Wrap adhesive tape around wiring that comes into contact with metal parts to protect the wiring. – Place all cables away from moving parts, such as the shift lever and seat rails. – Place all cables away from hot places, such as near the heater outlet. – Do not connect the yellow cable to the battery by passing it through the hole to the engine compartment. – Cover any disconnected cable connectors with insulating tape.

– Do not shorten any cables.

– Never cut the insulation of the power cable of

this unit in order to share the power with other

devices. The current capacity of the cable is

limited.

– Use a fuse of the rating prescribed.

– Never wire the negative speaker cable directly

to ground.

– Never band together negative cables of multiple

speakers.

· When this unit is on, control signals are sent

through the blue/white cable. Connect this cable

to the system remote control of an external power

amp or the vehicle’s auto-antenna relay control

terminal (max. 300mA 12 V DC). If the vehicle is

equipped with a glass antenna, connect it to the

antenna booster power supply terminal.

· Never connect the blue/white cable to the power

terminal of an external power amp. Also, never

connect it to the power terminal of the auto

antenna. Doing so may result in battery drain or

a malfunction.

· The graphical symbol

placed on the

product means direct current.

This unit

Microphone (3 m) DAB antenna input To receive DAB signals, connect a DAB antenna (AN-DAB1) (sold separately) to the unit. Power cord input Microphone input Rear output (STD) or middle range output (NW) Front output (STD) or high range output (NW) Antenna input Fuse (10 A) Wired remote input Hard-wired remote control adapter can be connected (sold separately). Subwoofer output

Power cord
To power cord input Depending on the kind of vehicle, the function of
and may be different. In this case, be sure to connect to and to . Yellow Back-up (or accessory) Yellow Connect to the constant 12 V supply terminal. Red Accessory (or back-up) Red Connect to terminal controlled by the ignition switch (12 V DC). Connect leads of the same colour to each other. Black (chassis ground) Blue/white The pin position of the ISO connector will differ depending on the type of vehicle. Connect and when Pin 5 is an antenna control type. In another type of vehicle, never connect and . Blue/white Connect to the system control terminal of the power amp (max. 300 mA 12 V DC). Blue/white Connect to the auto-antenna relay control terminal (max. 300 mA 12 V DC). Speaker leads White: Front left (STD) or high range left (NW) White/black: Front left (STD) or high range

left (NW) Gray: Front right (STD) or high range right
(NW) Gray/black: Front right (STD) or high range right (NW) Green: Rear left (STD) or middle range left
(NW) Green/black: Rear left (STD) or middle range left (NW) Violet: Rear right (STD) or middle range right
(NW) Violet/black: Rear right (STD) or middle range right (NW) Orange/white Connect to a car’s illumination signal. ISO connector In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors. NOTES · Change the initial menu of this unit. Refer to [REAR- SP]. The subwoofer output of this unit is monaural. · When using a subwoofer of 2 , be sure to connect the subwoofer to the violet and violet/ black leads of this unit. Do not connect anything to the green and green/black leads.
Power amp (sold separately)
Perform these connections when using the optional amplifier.
System remote control Connect to blue/white cable. Power amp (sold separately) Connect with RCA cables (sold separately) To rear output (STD) or middle range output (NW) Rear speaker (STD) or middle range speaker (NW)

To front output (STD) or high range output (NW) Front speaker (STD) or high range speaker (NW) To subwoofer output Subwoofer

Installation

Important · Check all connections and systems before final
installation. · Do not use unauthorized parts as this may cause
malfunctions. · Consult your dealer if installation requires drilling
of holes or other modifications to the vehicle. · Do not install this unit where:
– it may interfere with operation of the vehicle. – it may cause injury to a passenger as a result of
a sudden stop. · Install this unit away from hot places such as near
the heater outlet. · Optimum performance is
obtained when the unit is installed at an angle of less than 60°. · When installing, to ensure proper heat dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents.

Leave ample space

5 cm

5 cm
DIN mount installation
1 Insert the supplied mounting sleeve into
the dashboard.
2 Secure the mounting sleeve by using a
screwdriver to bend the metal tabs (90°) into place.

Dashboard Mounting sleeve · Make sure that the unit is installed securely in place. An unstable installation may cause skipping or other malfunctions.
When not using the supplied mounting sleeve 1 Determine the appropriate position where
the holes on the bracket and the side of the unit match.
2 Tighten two screws on each side.
Tapping screw (5 mm × 9 mm, not supplied with product) Mounting bracket Dashboard or console
Removing the unit (installed with the supplied mounting sleeve) 1 Remove the trim ring.
Trim ring Notched tab · Releasing the front panel allows easier access to the trim ring.

· When reattaching the trim ring, point the side with the notched tab down.
2 Insert the supplied extraction keys into
both sides of the unit until they click into
place.
3 Pull the unit out of the dashboard.

Installing the microphone
The microphone should be placed directly in front of the driver at a suitable distance to pick up their voice clearly.
CAUTION
It is extremely dangerous to allow the microphone lead to become wound around the steering column or shift lever. Be sure to install the microphone in such a way that it will not obstruct driving. It is recommended to use the clamps (sold separately) to arrange the lead. NOTE Depending on the vehicle model, the microphone cable length may be too short when you mount the microphone on the sun visor. In such cases, install the microphone on the steering column.
To install on the sun visor
1 Fit the microphone lead into the groove.
Microphone lead Groove

Microphone clip
To install on the steering column
1 Slide the microphone base to detach it
from the microphone clip.
Microphone Microphone clip Microphone base
2 Install the microphone on the rear side of
the steering column.

2 Install the microphone clip on the sun
visor. Lowering the sun visor reduces the voice recognition rate.

Double-sided tape

CD/USB/iPhone®/AUX operation
(iPhone source is not available when [USB MTP] is set to [ON] in the SYSTEM settings.)
CD
1 Insert a disc into the disc loading slot with the label side up.
To eject a disc, stop playback first then press .
USB/iPhone
1 Open the USB port cover. 2 Plug in the USB device/iPhone using an appropriate cable.
MTP connection A device installed with Android OS 4.0 or most of later versions can be connected to the unit via MTP, using the cable supplied with the Android device. However, depending on the connected device, OS version or the numbers of the files in the device, audio files/songs may not be able to be played back via MTP. NOTE If you use an MTP connection, [USB MTP] needs to be set to [ON] in the SYSTEM settings.
AUX
1 Insert the stereo mini plug into the AUX input jack. 2 Press SRC/OFF to select [AUX IN] as the source.

Bluetooth connection
Up to two Bluetooth telephones can be connected simultaneously.
1 Turn on the Bluetooth function of the device. 2 Select the unit name shown in the device display. 3 Make sure the same 6-digit number appears on this unit and the
device.
4 Select [YES].

Bluetooth telephone
Basic operations Purpose Answer an incoming call
End a call Reject an incoming call

Operation

Press any button when a call is received. Press .
Press and hold when a call is received.

Activating voice recognition mode

1 Press and hold
commands.

and then talk into the microphone to input voice

To exit the voice recognition mode, press BAND/ .

Making a connection with Pioneer Smart Sync
Pioneer Smart Sync is the application that intelligently brings your maps, messages, and music together in the vehicle.
WARNING Do not attempt to operate the application while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the application.
1 Enter the SYSTEM menu (refer to “About the main menu”). 2 Turn the M.C. dial to select [APP CONTROL], then press to confirm. 3 Turn the M.C. dial to select one of the below.
· Select [WIRED] for the USB connection. · Select [BLUETOOTH] for the Bluetooth connection.
4 Turn the M.C. dial to select [AUTO APP CONN], then press to confirm. 5 Turn the M.C. dial to select [ON], then press to confirm. 6 Connect this unit with the mobile device via USB or Bluetooth.
Pioneer Smart Sync on the iPhone/Android device starts automatically.

NOTE Regardless of whether the [AUTO APP CONN] setting is set to [ON] or [OFF], you can also perform the following to start Pioneer Smart Sync. – For devices other than the USB-connected Android device, press SRC/OFF to select any
source and press and hold the M.C. dial. – For iPhone, launch Pioneer Smart Sync on the mobile device.
Listening to Spotify®
(Not available when [USB MTP] is set to [ON] in the SYSTEM settings.)
Update the firmware of the Spotify application to the latest version before use. Before you start, connect this unit with the mobile device via USB (iPhone only) or Bluetooth.
1 Enter the SYSTEM menu (refer to “About the main menu”).
2 Turn the M.C. dial to select [APP CONTROL], then press to confirm.
3 Turn the M.C. dial to select one of the below.
· Select [WIRED] for the USB connection. · Select [BLUETOOTH] for the Bluetooth connection.
4 Press SRC/OFF to select [SPOTIFY].
5 Launch the Spotify application on the mobile device and start
playback.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>