RYOBI RBTM18 Portable Speaker Instruction Manual

RYOBI RBTM18 Portable Speaker

Product Information

Specifications

• Model: RBTM18
• Intended Use: The speaker can play back audio signals from connected audio devices.
• Speaker Safety Warnings:
  • Never disassemble or modify the product in any way.
  • Do not use the product near water.
  • Do not place product near any heat sources such as radiators, heat registers, stoves, or other products that produce heat.
  • The speaker grill should not be covered with items obstructing airflow.
  • Do not place the product in closed bookcases or racks without proper ventilation.
• Additional Battery Safety Warnings:
  • Avoid immersing the tool, battery pack, or charger in fluids.
  • Transport lithium batteries following local regulations and provisions.

Product Usage Instructions

1. Assembly: Follow the assembly instructions provided in the manual to properly set up the product.
2. Maintenance: Regularly clean the product and ensure it is free from dust and debris. Do not attempt to disassemble or modify the product.
3. Operation: Connect audio devices to thespeaker and use the on/off button to power it on. Avoid placing the speaker near water or heat sources.

FAQ

• Q: Can I use the speaker for purposes other than playing audio signals?
  A: No, it is recommended to only use the speaker for its intended purpose of playing back audio signals. Misuse could lead to hazardous situations.

• Q: How should I transport the batteries?
  A: Follow local and national regulations for transporting lithium batteries. Avoid contact with other batteries or conductive materials and do not transport cracked or leaking batteries.

Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating the product.

Subject to technical modification

Safety, performance, and dependability have been given top priority in the design of your Bluetooth® speaker.

INTENDED USE

The speaker can play back audio signals from connected audio devices.
Do not use the product for any other purpose. Use of the product for operations different from intended could result in a hazardous situation.

SPEAKER SAFETY WARNINGS

• Never disassemble or modify the product in any way.
• Do not use the product near water.
• Do not place product near any heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
• The speaker grill should not be covered with items such as newspapers, table-cloths, curtains, etc.
• Do not place the product in closed bookcases or racks without proper ventilation.

ADDITIONAL BATTERY  SAFETY WARNINGS

To reduce the risk of fire, personal injury, and product  damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.

TRANSPORTING LITHIUM  BATTERIES

Transport the battery in accordance with local and national provisions and regulations.
Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.

KNOW YOUR PRODUCT

See page 101.

1. On/off button
2. LED indicator
3. Play / pause / disconnect Bluetooth® button
4. Volume buttons
5. Battery port
6. Operator’s manual
7. Battery pack
8. Charger

NOTES ON OPERATION

• The product will switch off in 10 minutes if no audio has been streamed or no Bluetooth® device connected. Switch on the product to resume operation.
• The controls may not be supported by the Bluetooth® device and/or application you are using.
• When switched on, the volume will return to the last setting.

MAINTENANCE

• Use only original accessories and spare parts. Should components need to be replaced which have not been described, please contact an authorised service centre. All repairs should be performed by an authorised service centre.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
• Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

SYMBOLS ON THE PRODUCT

SYMBOLS IN THIS MANUAL

PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS

• Bluetooth® speaker
• Model RBTM18
• Voltage 18 V
• • Bluetooth® range 25 m

BATTERY AND CHARGER

• Model Compatible battery pack (not included)
• Compatible charger (not included)
• Lithium-ion RB18L.. BCL1418..H RC18..

RYOBI® WARRANTY APPLICATION CONDITIONS

In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below.

1. The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use. This warranty applies only on new products.
2. There is a possibility to extend for a part of the range of power tools (AC/DC) the warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of products for extended warranty is clearly displayed in stores and / or on packaging and is contained within the product documentation. The end user is required to register his/her newly-acquired products online within 30 days from the date of purchase. The end user may register for the extended warranty in his/her country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of their personal data that is required to be entered online. They must also accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty.
3. The warranty covers all defects of the product during the warranty period due to faults in workmanship or material at the purchase date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or has been incorrectly connected to a power supply. This warranty does not apply to:
   • any damage to the product that is the result of improper or lack of maintenance
   • any product that has been altered or modified
   • any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
   • any damage caused by non-observance of the instruction manual
   • any product not displaying the CE approval mark on the rating plate
   • any product that has been attempted to be repaired by a non-authorised warranty service centre or without prior authorisation by Techtronic Industries
   • any product connected to improper power supply (amps, voltage, frequency)
   • any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
   • normal wear and tear spare parts
   • inappropriate use, overloading of the tool
   • use of non-approved accessories or parts
   • Power tool accessories provided with the tool or purchased separately, including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide, etc.
   • Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.
4. For servicing, the product must be sent or presented to a RYOBI authorised service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organisation. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with sender’s address and accompanied by a short description of the fault.
5. A repair / replacement under this warranty is free of charge. It does not constitute an extension or a new start of the warranty period. Exchanged parts or products become our property. In some countries delivery charges or postage will have to be paid by the sender. Your statutory rights arising from the purchase of the product remain unaffected
6. This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey and Russia. Outside these areas, please contact your authorised RYOBI dealer to determine if another warranty applies.

AUTHORISED SERVICE CENTRE
Any request or issue with the product can be addressed to your local authorised service centres (visit www.ryobitools.eu) or directly to: Techtronic Industries GmbH, Max Eyth Straße 10, 71364 Winnenden, Germany. Please state the serial number and product type printed on the label.

Bluetooth® license statement
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Techtronic Industries GmbH is under license. Other trademarks and trade names are those of their respective owners.

RYOBI is a trade mark of Ryobi Limited, and is used under license.

Assembly

Techtronic Industries GmbH
Max-Eyth-Straße 10,
71364 Winnenden, Germany
20201127v1B

References

• Ryobi Tools
• Ryobi Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>