ILVE XR400 90cm Canopy Range Hood with Remote Location Motor Instructions
- September 26, 2024
- ILVE
Table of Contents
ILVE XR400 90cm Canopy Range Hood with Remote Location Motor
Incorporating all the features of the X400 Hood, the XR400-90 Remote motor
hood reduces the noise in the kitchen by up to 70%. At ILVE, we are dedicated
to creating quiet range hoods with maximum performance via the use of a remote
extraction system, in which the motor is located seperate from the hood body (
i.e. in the ceiling). By doing this, the noise is reduced rapidly.
Both the installation methods of the motor; in the roof (Silent Split Exterior) or in a false ceiling (Silent Split Inline) for example are designed for ease of installation based on your individual needs. In-built LED Lights produce a natural brightness, illuminating your cooking area while the streamlined electronic control of the panel ensures whisper-quiet air extraction is at your fingertips. Either as a visual focal point or discreetly integrated, it is easy to see that ILVE rangehoods are built to extract!
Specifications
- Model: XR400-90 Canopy Hood
- Size: 90cm ONLY
- Power standard: 10 Amp plug
- Ducting size: 150mm
Remote Motor Canopy Range
- Designed and purpose-built for ILVE appliances
- Recommended for Tepanyaki models or when very high air extraction is required
- Ultra sleek design with stainless steel molded front facia
- Remote Motor: the fan motor can be installed remotely from 0the body and cooking area (see a copy on the previous page)
- Suitable for all ILVE cooktops 80, 90 & 100cm
- Twin turbine high-velocity fan, the optional in-line motor is available to assist with airflow.
ECO-booster Feature
Our new and improved range hoods incorporate a 4th-speed that is used as an
“ECO-booster”. When active, the range hood will operate at a higher speed (4)
for 10 minutes, and then the speed will automatically turn down to speed 3.
- Programmable 5, 10, 15, 20-minute auto fan shut-down
- Dishwasher Stainless steel safe filters
- Electronic variable speed control
- Adjustable flue to ceiling at your preferred height
- Motor cut-out fire protection
- LED lighting
- Filter cleaning reminder light
- Max. Airflow (m3/h): 920 net or 1200 gross*
- Noise (dB): high 62
- AS304 stainless steel construction
- Sizes: 90cm
- Colour: Stainless Steel
- Ducting size: 150mm
Model: XR400-90 Canopy Hood
Size: 90cm ONLY
Power standard: 10 Amp plug
Ducting size: 150mm
Extended flue pipe is available from ILVE
Range Hood extraction rate m3/h reading is measured at: 1m duct up, 1 x 90°C
bend & 1m vertical duct Using the conversion back to 125mm may affect the
performance
Installation
- Ensure the canopy hood is installed at a suitable height above your cooktop for effective ventilation.
- Connect the remote motor according to the provided instructions.
Operation
- Turn on the canopy hood using the control panel or remote control.
- Adjust the fan speed as needed to maintain proper ventilation.
Maintenance
- Regularly clean the stainless steel filter to ensure optimal performance.
- Check and clean ducting to prevent blockages and maintain efficiency.
DISCLAIMER
ILVE AUS & NZ is continually seeking ways to improve the design specifications, aesthetics, and production techniques of its products. As a result alterations to our products and designs take place continually. Whilst every effort is made to produce information and literature that is up to date, this brochure should not be regarded as an infallible guide to the current specifications, nor does it constitute an offer for the sale of any particular product. Product dimensions indicated in our literature are indicative only. Actual products only should be used to define dimension cutouts. Distributors, and retailers are not agents of ILVE AUS & NZ and are not authorized to bind ILVE AUS & NZ by any express or implied undertaking or representation.
FAQs
Q: What should I do if the canopy hood is making unusual noises?
A: Check for any loose components and tighten them. If the issue persists,
contact customer care for further assistance.
Q: Can I use a different ducting size than the recommended 150mm?
A: It is not recommended as it may affect the performance of the canopy hood.
Contact ILVE for guidance on suitable alternatives.
CONTACT US
Email: customercare.au@ilve.com
www.ilve.com/en-au/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>